• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.678-681
• /
• 2010

In the present work, a numerical study is conducted to investigate the effect of the transient nozzle pressure ratio (NPR) on the flow fields inside the nozzle. The unsteady, compressible, axisymmetric, Navier-Stocks equations with SST $k-{\omega}$ turbulence model are solved using a fully implicit finite volume scheme. In order to simulate the start-up and shut-down processes of the engine, NPR is varied from 2.0 to 10.0. It is observed that the interaction patterns and the hysteresis phenomenon strongly depend on the time variation of NPR, leading to significantly different characteristics in the lateral forces.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.5
• /
• pp.1512-1521
• /
• 1991

본 연구에서는 유속과 압력등이 시간과 위치의 함수로 표현되는 비정상 유체 가 흐를 때 그 유동 특성이 파이프계에 미치는 영향을 고찰하기 위해 비정상 유동을 포함한 파이프계의 운동방정식을 유도하고 유동 변수가 파이프계의 안정성에 미치는 영향을 연구하였다.

• The Korean Journal of Rheology
• /
• v.7 no.2
• /
• pp.139-149
• /
• 1995

실제 복합재료 제조공정에 널리 이용되는 등방성 탄소섬유직조와 에폭시수지에 대 해서 수지의 유동을 일방향으로 근사하여 비정상상태 투과계수와 모세관압을 측정하는 실험 을 수행하였고 적층된 섬유직조의 기공율, 금형 주입압력 그리고 섬유직조의 적층수에 따른 수지유동특성을 분석하였다. 또한 금형 충전과정에 대한 유동가시화 실험을 수행하여 유동 선단과 충전시간을 측정하였다. 전체 조업압력에 미치는 모세관압의 영향을 규명하기 위해 일정 유입압력에 따른 금형충전과정에 대하여 유한요소/관할부피 방법을 이용한 수치모사를 수행하였다. 함침공정의 수지유동에서 비정상상태 투과계수는 섬유직조의 기공율에 따라 급 격히 증가하였고 에폭시수의 표면장력에 기인한 모세관압은 기공율 감소에 따라 급격히 증 가하였다. 동일한 기공율에서 섬유직조의 적층수가 증가함에 따라 투과계수와 모세관압은 모두 증가하는 경향을 보였다. 또한실험에서 측정한 모세관압을 고려하여 유동선단과 금형 충전시간을 수치모사방법으로 예측ㄷ한 결과는 유동가시화 실험에의한 결과와 잘 일치함을 보였다. 이결과로부터 낮은 압력에서 조업하는 RTM공정에서 모세관압효과는 유동선단과 금형 충전시간을 예측하는데 기여함을 알수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.311-317
• /
• 2015

This paper describes how to apply one-dimensional simulation to predict unsteady state characteristics of the cold-gas pintle thruster. Mass flow rate, chamber pressure, and nozzle exit pressure are key parameters for thrust control. Chamber pressure rose and fell monotonously with the pintle stroke variation, while thrust variation was different from chamber pressure variation. During the forward pintle stroke operation, the thrust value tended to decrease initially and returned to increase when pintle speed and chamber free volume exceed some specified value. Even though one-dimensional simulation has the limitations to predict unsteady state characteristics, it is still useful for initial performance assessment of various thrusters which adopt an altitude compensation nozzle such as a dual-bell nozzle, prior to experiment or numerical analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.247-255
• /
• 2016

The purpose of this study is to investigate unsteady-state characteristics of a pintle thruster with various pintle speed. Based on steady state experimental results, non-linear pintle stroke equation is obtained and applied to the unsteady state experimental system. For the unsteady state experiments, three different pintle speeds are used: 3.10 mm/s, 5.65 mm/s, 10.83 mm/s, respectively. Results show that backward pintle stroke results in faster convergence time because of high chamber pressure during backward pintle stroke sequence. During the forward and backward process, thrust curve shows singular points. These phenomenons is caused by variation of mass flow rate, which is mainly due to changes of both chamber pressures and nozzle throat area. This behavior becomes distinctive for a faster pintle speed case.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.1
• /
• pp.74-81
• /
• 2001

Dynamic pressure is one of the major sources on noise emission in oil hydraulic piston pump. This paper reports an experimental study of dynamic pressure characteristics in the cylinder bore of oil hydraulic piston pump. We experimently measured dynamic pressure at BDC with delivery pressure, rotational speed and oil temperature. Because the V-grooves at the ends of the kidney ports with three types valve plates. We hope this paper help to design of the valve plate in oil hydraulic piston pump.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.221-226
• /
• 2008

A typical unsteady internal ballistic analysis model was proposed to take account the erosive burning with the variance of local velocity and pressure along grain surface to the axis of a solid rocket combustor. The model introduced in this study showed good agreements with the results of previous research. It was investigated that the combustion pressure, grain length, initial temperature, and vaporization temperature of propellant affect on the erosive burning.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.2
• /
• pp.17-25
• /
• 2009

A typical unsteady internal ballistic analysis model was proposed to take account of the erosive burning with the variance of local velocity and pressure along the grain surface of a solid rocket combustor. To validate the model of concern in the study, both cases of non-erosive and erosive burning were compared with the previous researches with marginal accuracy. It was quantitatively investigated that the combustion pressure, grain length, initial temperature, and vaporization temperature of propellant affect the erosive burning characteristics.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.2
• /
• pp.519-526
• /
• 1995

Experiments have been performed to test the analytical tools developed concurrently for the motion-related unsteady pressure in annular passages. The outer cylindrical body was oscillated by a shaker in either rocking motion about a hinge-point or lateral translation motion. In the equilibrium configuration the two bodies are either concentric or eccentric, in the plane of oscillation or normal to it. The unsteady pressure generated by the oscillatory motion with low amplitudes (displacement/radius) was measured on wall of the fixed inner cylinder at various axial and azimuthal locations. The unsteady pressure were compared with theoretical predictions, and agreement was found to be within 10%. Experiments have been shown that the effect of flow velocity on the unsteady pressure is minimal and the pressure increases more or less with oscillatory motion, for low flow velocities (Re = 2 900).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.310-313
• /
• 2006

The present study aims at investigating the effectiveness of a new passive cavity flow control technique, sub-cavity. The characteristics of cavity flow oscillation with the device are compared with those with other control techniques tested previously, including a triangular bump and blowing jet. In the computation, the three-dimensional, unsteady Navier-Stokes equations governing the supersonic cavity flow are solved based on an implicit finite volume scheme spatially and multi-stage Runge-Kutta scheme temporally. Large eddy simulation (LES) is carried out to properly predict the turbulent features of cavity flow. The present results show that the pressure oscillation near the downstream edge dominates overall time-dependent cavity pressure variations, and the amplitude of the pressure oscillation can be reduced in the presence of a sub-cavity.