• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.4
• /
• pp.287-293
• /
• 2005

Ultrasonic guided waves are gaining increasing attention for the inspection of platelike and rodlike structures. At the same time, inspection methods that do not require contact with the test piece are being developed for advanced applications. This paper capitalizes on recent advances in the areas of guided wave ultrasonics and noncontact ultrasonics to demonstrate a superior method for the nondestructive detection of defects thinning simulating hidden corrosion in thin aluminum plates. The proposed approach uses EMAT(electro-magnetic acoustic transducer) for the noncontact generation and detection of guided waves. Interesting features in the dispersive behavior of selected guided modes are used for the detection of plate thinning. It is shown that mode cutoff measurements provide a qualitative detection of defects thinning. Measurement of the mode group velocity can be also used to quantify depth thinning.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.163-168
• /
• 2001

Due to aging, adhesively bonded and riveted aircraft lap joints can contain distends, cracks around rivet holes, fatigue induced flaws, and corrosion. It is required for the safety of aircraft to inspect these defects through the whole region of mint in rapid speed. Bond quality or adhesively bonded and riveted aluminum lap splice joints is investigated using non-contact remote ultrasonic nondestructive evaluation (NDE). Non-contact ultrasonic tests are performed using laser generation and air-coupled transducer detection. A Q-switched Nd:YAG laser and a periodic transmission mask are used to generate a selected Lamb mode. The Lamb wave is generated on one side of the lap splice joint, propagates along the plate, interacts with the joint and is detected on the other side by a micromachined air-coupled capacitance transducer. Analysis of recorded signals allows to evaluate the condition of the bond.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.1
• /
• pp.40-46
• /
• 2011

In the field application of the conventional acoustic nonlinear technique using through transmission of bulk waves to evaluate the contact acoustic nonlinearity(CAN) in solid-solid contact interfaces like as in the closed crack, it has difficulty to access inner position for attaching the pulsing or receiving transducer. In the present study, a new reflection technique has been suggested to measure the acoustic nonlinearity in solid-solid contact interfaces, which uses both of pulsing and receiving transducers on the same side of target and so that it will be very useful for the field application. For this, based on the linear and the nonlinear contact stiffness estimated by the power-model of the contacting pressure, the nonlinear parameter of the reflected ultrasonic wave at the interfaces has been theoretically calculated. Experimental results in contact interfaces of A1606l-T6 alloy specimens with loading pressure showed good agreement with the theoretical predictions, which proves the validity of the suggested reflection mode technique.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.358-363
• /
• 2008

Ultrasonic nonlinearity has been considered as a promising method to evaluate the micro damage of material; however, its magnitude is so small that its measurement is not easy. Thus, in this study, we investigate the effects of such experimental system dependent factors in the measurement of ultrasonic nonlinear parameter by using contact PZT transducer. Experimental results showed that the effect of system dependent nonlinearity is reduced when the contact pressure and transducer input voltage are sufficiently large. These results will be very useful to find out the proper experiment condition to measure rather accurate nonlinear parameter.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.17 no.4
• /
• pp.278-284
• /
• 1997

EMAT는 비접촉으로 초음파를 송수신 할 수 있는 탐촉자로서 시험체와 탐촉자간의 접촉을 위한 매개 물질이 필요치 않으므로, 움직이고 있는 물체에 초음파탐상법을 적용하고자 하는 분야와 초음파의 속도를 정밀하게 측정하고자 하는 분야에 주로 응용된다. 구체적으로는 길이가 긴 튜브류의 결함 탐상, 용접중인 재료의 용접상태 감시, 기차바퀴 및 레일의 결함 탐상, 고온상태인 재료의 결함 탐상 등이 비접촉 특성을 이용하여 적용될 수 있는 분야이며, 재료의 집합조직 및 소성이방성의 측정, 재료의 미세조직 및 기계적 강도의 예측, 그리고 잔류응력의 측정 등이 정밀한 초음파속도 및 감쇠의 측정으로부터 적용될 수 있는 분야이다. EMAT가 일반적인 접촉식초음파탐상법에 비하여 특별한 분야에의 응용에 큰 장점을 가지고 있지만, 낮은 에너지 전환효율, 넓은 불감영역, 그리고 사용주파수의 한계 등의 문제를 가지고 있기 때문에 기존의 접촉식 방법의 적용이 용이한 분야에의 적용은 필요하지 않다. 그러나 특별한 목적과 용도에의 적용 필요성이 생길 경우에는 적절한 연구를 통하여 알맞은 탐촉자를 제작하고 탐상 방법을 개발함으로서 본래의 목적에 알맞은 탐상이 수행될 수 있다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.96-101
• /
• 2013

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.510-516
• /
• 2016

• The Optical Journal
• /
• v.14 no.4 s.80
• /
• pp.56-58
• /
• 2002

최근들어 FPD(평판 디스플레이), MEMS, 반도체, 광부품 등의 분야에서 극미세화의 경향이 보이고 있다. 이들의 가공기술과 더불어 검사장비 역시 2차원 마이크로미터의 수준에서 3차원 나노미터 정밀도를 갖는 장비로 급속도로 교체되고 있는 것이 현실이다. 본 고에서는 반도체에 이어 한국의 기술력을 세계 1위로 끌어올린 FPD 분야에서 3차원 검사장비의 활용을 중심적으로 기술 및 시장동향을 살펴보고자 한다.

• Pediatric Infection and Vaccine
• /
• v.20 no.1
• /
• pp.17-27
• /
• 2013

Purpose: Recently, two tests are commercially available for the identification of latent tuberculosis infection (LTBI): tuberculin skin test (TST) and interferon-${\gamma}$ release assay (IGRA). Due to its false positiveness, TST tends to be preferred by IGRA until now. In our study, we simultaneously performed both TST and QuantiFERON$^{(R)}$-TB Gold In-Tube (QFT-GIT) and compared their results. Methods: TST and QFT-GIT were done for the diagnosis of LTBI among children who visited pediatric out-patient clinic at St. Vincent's Hospital, The Catholic University of Korea from February of 2007 to May of 2008. The study group was stratified into two groups in terms of whether there was intrafamilial contact or not. Results: Out of total 35 children, 29 were tuberculosis (TB)-exposed cases and the remainders were diagnosed as clinical pulmonary TB. Among these 29 children, TST was positive 38.9% (7/18) for the intrafamilial and 45.5% (5/11) for the nonintrafamilial, and at the same time, the result for QFT-GIT was positive 5.6% (1/18) and 9.1% (1/11), respectively which implies that TST was more sensitive than QFT-GIT. Among 29 TB-exposed cases, 26 initially went through TST and QFTGIT together on their first visit to out-patient clinic, and 15 continued the follow-up tests. Out of total 41 cases collected, the agreement (known as kappa value) was 0.063 which was relatively low. Including 6 cases with pulmonary TB who were all positive for TST and only 5 being positive for QFT-GIT, the final kappa value was 0.334. Conclusion: In our study, the agreement for TST and QFT-GIT was low, and the majorities were almost the cases of positive TST. In current situation with lacking a gold standard test and limited data on children to adolescents, this result is quite alarming that the recent trend tends to replace TST by QFT-GIT when diagnosing LTBI.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.362-368
• /
• 2012

The objective of this study is to image the harmonic wave generated by contact acoustic nonlinearity in obliquely incident ultrasonic wave for early detection of closed cracks. A closed crack has been simulated by contacting two aluminum block specimens producing solid-solid contact interfaces and then acoustic nonlinearity has been imaged with contact pressure. Sampling phased array(SPA) and synthetic aperture focusing technique(SAFT) are used for imaging techniques. The amplitude of the fundamental frequency decreased with appling pressure. But, the amplitude of second harmonic increased with pressure and was a maximum amplitude at the simulation point of closed crack. Then, the amplitude of second harmonic decreased. As a result, harmonic imaging of contact acoustic nonlinearity is possible and it is expected to be apply for early detection of initial cracks.