• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.358-363
• /
• 2008

Ultrasonic nonlinearity has been considered as a promising method to evaluate the micro damage of material; however, its magnitude is so small that its measurement is not easy. Thus, in this study, we investigate the effects of such experimental system dependent factors in the measurement of ultrasonic nonlinear parameter by using contact PZT transducer. Experimental results showed that the effect of system dependent nonlinearity is reduced when the contact pressure and transducer input voltage are sufficiently large. These results will be very useful to find out the proper experiment condition to measure rather accurate nonlinear parameter.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.4
• /
• pp.287-293
• /
• 2005

Ultrasonic guided waves are gaining increasing attention for the inspection of platelike and rodlike structures. At the same time, inspection methods that do not require contact with the test piece are being developed for advanced applications. This paper capitalizes on recent advances in the areas of guided wave ultrasonics and noncontact ultrasonics to demonstrate a superior method for the nondestructive detection of defects thinning simulating hidden corrosion in thin aluminum plates. The proposed approach uses EMAT(electro-magnetic acoustic transducer) for the noncontact generation and detection of guided waves. Interesting features in the dispersive behavior of selected guided modes are used for the detection of plate thinning. It is shown that mode cutoff measurements provide a qualitative detection of defects thinning. Measurement of the mode group velocity can be also used to quantify depth thinning.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1927-1928
• /
• 2002

기존의 3차원 형상 측정법은 대부분 접촉식이기때문에 피측정물이 손상이 입거나 Probe의 보정이 필요하거나 Probe가 측정면에 직접 닿지 않는 경우는 측정이 불가능하였다. 또한 많은 점을 측정할 경우측정시간이 많이 걸린다. 물체의 크기가 크거나 측정하고자하는 물체가 무를 경우에는 적합하지 못하다. 이러한 단점은 보완하기 위하여 비접촉식인 측정법 이용한 관측이 대두되게 되었다. 비접촉식에 의한 관측은 물체의 표면을 손상시키지 않으면서 정밀하고 고품질이 요구되는 제품 검사 및 자동화 기술의 발달로 인하여 생산 산업 분야에 이용되고 있다 이에 비접촉식 방식에서도 광학간섭의 하나인 마이켈슨 간섭계를 이용하여 간섭무늬 패턴으로 물체 이미지를 분석하고 CCD카메라에서 영상을 얻어 3차원 물체를 해석하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.2
• /
• pp.163-168
• /
• 2001

Due to aging, adhesively bonded and riveted aircraft lap joints can contain distends, cracks around rivet holes, fatigue induced flaws, and corrosion. It is required for the safety of aircraft to inspect these defects through the whole region of mint in rapid speed. Bond quality or adhesively bonded and riveted aluminum lap splice joints is investigated using non-contact remote ultrasonic nondestructive evaluation (NDE). Non-contact ultrasonic tests are performed using laser generation and air-coupled transducer detection. A Q-switched Nd:YAG laser and a periodic transmission mask are used to generate a selected Lamb mode. The Lamb wave is generated on one side of the lap splice joint, propagates along the plate, interacts with the joint and is detected on the other side by a micromachined air-coupled capacitance transducer. Analysis of recorded signals allows to evaluate the condition of the bond.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.363-366
• /
• 2011

3D 디스플레이 시장이 커지면서 TFT-LCD TV 자동화 라인 생산 공정을 3D LCD TV 생산 공정으로 변환하여 대량 생산할 경우, 기 설치된 자동화 생산라인의 H/W 부분에는 특별한 투자가 이루어질 거라 판단되지 않고 있다. 하지만 3D LCD Module 검사 등의 S/W 적인 부분은 현재의 기 설치된 TFT-LCD Module 검사장비로는 검사가 불가능하여, 추가적인 투자가 이루어질 것이라 판단되고 있다. 이와 관련하여 본 연구에서는 TFT-LCD 제조공정의 효율적인 기술을 제안하고자 한다. 첫째는 TFT-LCD를 Cell상태에서 직접 구동하는 구동회로 기술과 사용 장소가 Clean Room이므로 개별적 구동 Pallet에 비접촉식으로 전원을 공급할 수 있는 비접촉식 급전장치에 대한 기술이다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.5
• /
• pp.399-405
• /
• 2016

Recently, fiber optic sensors, which have many advantages are being applied in various fields by replacing conventional electric sensors. To transmit the light signals between an interrogator and a sensor head, optical components such as an optical adaptor and optical jumper cords are generally used. When signals are transmitted using an adaptor, the end surface of each jumper cord is faced together. If alien substances exist on the core surface of an optical fiber, those can cause light transmission loss and signal disappearance. For this reason, non-contact fiber jumper cords are developed to overcome the problems that require continual attention. The light transmission performance of non-contact fiber jumper cords are also evaluated. From the test results, conventional fiber jumper cords are unable to transmit the signals over 2 mm cavity between the ends of both cords. Otherwise, non-contact fiber jumper cords can transmit the signals with stability up to the cavity of 7 mm though they have more transmission loss than the conventional ones. Consequently, non-contact fiber jumper cords that have better signal stability than conventional ones in environments are highly recommended in field applications, especially if they play a role as a cable for signal transmission between fiber optic sensors.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.71-75
• /
• 2004

An efficient color compensation method is proposed to reduce the color difference between the camera based inspection system and the colorimeter based inspection system in a plasma display panel production line. The color compensation matrix can be constructed by using the relationship between RGB to XYZ conversion matrices, which are obtained by the RGB primaries and reference white chromaticity coordinates. Experimental results show that the non-contact color inspection system using the proposed color compensation method satisfactorily compensates the chromaticity coordinates acquired by the area color CCD camera to be matched to those measured by the colorimeter for various test color.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.388-392
• /
• 2012

This study proposes a fully non-contact measurement method to assess acoustic nonlinearity of narrowband surface waves generated by a line-arrayed laser beam by using a laser-ultrasonic detector in the way of two-wave mixing (TWM) method. This method was applied to figure out a relationship between plastic deformation and nonlinearity characteristics of a plastically deformed aluminum specimens. The experimental results showed that the acoustic nonlinearity of the laser-generated surface wave increased proportionally to the level of tensile deformation. This tendency is in good agreement with the result of measurement by contact method with PZT-transducer.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.181-181
• /
• 2004

3 차원 형상측정기술(3-D Profile Measurement Method)은 가공품의 치수검사 및 형상측정 등의 공학분야뿐만 아니라 최근에는 의류산업 및 의학산업은 물론 오락산업의 가상현실 구현 등 여러 분야로 점차 사용이 확대되고 있다. 이러한 요구를 만족시킬 수 있는 광학을 바탕으로 한 비접촉 3 차원 형상측정방법(Non-contacting 3-D Profile Measuring Method)은 고속, 고정밀도 측정이 가능하기 때문에 활발히 연구되고 있다. 광학을 이용한 대표적인 3 차원 비접촉 측정방법의 하나인 영사식 무아레는 그림자식 무아레의 단점인 격자의 크기가 측정물체보다 커야 한다는 점과 측정물체와 격자사이의 거리 제한 문제를 해결하였으며, 위상이동법을 사용함으로서, 무아레 무늬 형태의 영향을 받지 않고 측정이 가능해졌다.(중략)

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.1
• /
• pp.68-76
• /
• 2014

최근 들어 급격히 발전한 테라헤르츠파 발생/검출 기술에 힘입어 생명, 화학, 기계, 통신 등의 다양한 분야에서 THz 관련 응용 연구가 진행되고 있다. 본 강좌에서는 최신 THz 발생/검출 기술을 분야별로 살펴보고 바이오, 재료, 기계 분야의 비접촉식 비파괴검사 분야에 적용 개발되고 있는 THz 기술에 대하여 기술하고자 한다. 특히, 구조물의 THz 비파괴검사 평가 분야 세부 기술에 대하여 자세하게 소개한다.