• The Journal of Korea Robotics Society
• /
• v.14 no.1
• /
• pp.65-73
• /
• 2019

In this paper, we propose an algorithm that estimates the location of lunar rover using IMU and vision system instead of the dead-reckoning method using IMU and encoder, which is difficult to estimate the exact distance due to the accumulated error and slip. First, in the lunar environment, magnetic fields are not uniform, unlike the Earth, so only acceleration and gyro sensor data were used for the localization. These data were applied to extended kalman filter to estimate Roll, Pitch, Yaw Euler angles of the exploration rover. Also, the lunar module has special color which can not be seen in the lunar environment. Therefore, the lunar module were correctly recognized by applying the HSV color filter to the stereo image taken by lunar rover. Then, the distance between the exploration rover and the lunar module was estimated through SIFT feature point matching algorithm and geometry. Finally, the estimated Euler angles and distances were used to estimate the current position of the rover from the lunar module. The performance of the proposed algorithm was been compared to the conventional algorithm to show the superiority of the proposed algorithm.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.37-46
• /
• 2021

In this paper, we designed and implemented a program to measure and to judge the accuracy of yoga postures using Azure Kinect. The program measures all joint positions of the user through Azure Kinect Camera and sensors. The measured values of joints are used as data to determine accuracy in two ways. The measured joint data are determined by trigonometry and Pythagoras theorem to determine the angle of the joint. In addition, the measured joint value is changed to relative position value. The calculated and obtained values are compared to the joint values and relative position values of the desired posture to determine the accuracy. Azure Kinect Camera organizes the screen so that users can check their posture and gives feedback on the user's posture accuracy to improve their posture.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.111-112
• /
• 2022

자율운항 선박, 무인선 개발과 동 분야 디지털트윈 구현을 위해서는 선박 내부 데이터의 수집을 담당할 고신뢰성 선내 통신망 확보가 필수적이다. WiFi와 같은 전파 기반의 무선통신 시스템은 금속 구조물로 구성되는 선박 내 환경 자체가 원활한 통신의 장애 요소이다. 이러한 극한 환경 극복을 위해 자기장을 금속 표면에 유기하여 비 전파 기반으로 무선통신을 가능하게 하는 표면파 통신이 대안이 될 수 있다. 선박 전체의 일반 배치 관점에서 표면파 통신은 상갑판을 통해 크게 거주구역, 화물구역, 선수구역 및 기관구역 간 백본 통신망을 구성할 수 있으며 각 구역 별로는 부재의 개구부를 통해 금속 표면의 연속면을 확보하여 통신할 수 있다. 수밀 격벽의 표면파 통신 관통을 위해 비 도전체로 수밀은 유지한 채 아주 미세한 구멍을 확보하는 것으로도 금속 표면의 연속성을 확보할 수 있다. 이러한 표면파 통신을 활용하면 전파 기반의 무선통신, 비 전파 기반의 무선통신을 통합적으로 구성하여 선박 전체로는 선내 무선 백본망 구성, 그리고 각 구역 별로는 IoT 센서 네트워크 등의 선박 내부 고신뢰성 무선통신 확보가 가능하다.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_3
• /
• pp.1671-1678
• /
• 2023

The Korea multi-purpose satellite (KOMPSAT) series consisting of multi-sensors has been used in various fields such as land, environmental monitoring, and disaster analysis since its first launch in 1999. Recently, as various information processing technologies (high-speed computing technology, computer vision, artificial intelligence, etc.) that are rapidly developing are utilized in the field of remote sensing, it has become possible to develop more various satellite image processing and analysis algorithms. In this special issue, we would like to introduce recently researched technologies related to the KOMPSAT image application and research topics participated in the 2023 Satellite Information Application Contest.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.2
• /
• pp.61-71
• /
• 2009

In this paper, we propose a low-cost and compact motion capture system which enables to play motion games in PS2(Play Station 2). Recently, motion capture systems which are being used as a part in film producing and making games are too expensive and enormous systems. Now days, motion games using common USB camera are slow and have two-dimension recognition. But PSD sensor has a few good points, such as fast and low-cost. In recently year, 3D motion capture systems using 2D PSD (Position Sensitive Detector) optic sensor for motion capturing have been developed. One is Multi-PSD motion capture system applying stereo vision and another is Single-PSD motion capture system applying optical theory ship. But there are some problems to apply them to motion games. The Multi-PSD is high-cost and complicated because of using two more PSD Camera. It is so difficult to make markers having omni-direction equal intensity in Single-PSD. In this research, we propose a new theory that solves aforementioned problems. It can measure 3D coordination if separated two marker's intensity is equal to. We made a system based on this theory and experimented for performance capability. As a result, we were able to develop a motion capture system which is a single, low-cost, fast, compact, wide-angle and an adaptable motion games. The developed system is expected to be useful in animation, movies and games.

• Journal of the HCI Society of Korea
• /
• v.1 no.2
• /
• pp.43-50
• /
• 2006

A mirror is a familiar tool for human beings who have been seeing themselves through it for a long time since it was created. As evolving Digital Technology, many approaches about digital mirrors which reflect not only the light, but also the information have been studied. Traditional mirrors on the wall do not need any special control to perform their automatic visual feedbacks, reflecting lights. On the contrary, digital mirrors can actively provide more information to the user than the traditional ones. In this paper, we propose an active digital mirror system of which functions are changed according to the user-mirror distance. First of all, we investigated users' behaviors on mirrors and categorized the interactions by user-mirror distance. Based on the previous result, we designed the user interface of the mirror, and developed a prototype which has three recognition modules: a distance measuring module using infrared sensor arrays, a user recognition module by computer vision technique, and a control perception module using infrared sensor grid. In addition, the next steps for improving the user-centered digital mirror system, and the possibility for developing a mirror-shaped computer system were suggested.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.53-62
• /
• 2016

In recent years, UAV Photogrammetry based on an ultra-light UAS(Unmanned Aerial System) installed with a low-cost compact navigation device and a camera has attracted great attention through fast and accurate acquirement of geo-spatial data. In particular, UAV Photogrammetry do gradually replace the traditional aerial photogrammetry because it is able to produce DEMs(Digital Elevation Models) and Orthophotos rapidly owing to large amounts of high resolution image collection by a low-cost camera and image processing software combined with computer vision technique. With these advantages, UAV-Photogrammetry has therefore been applying to a large scale mapping and cadastral surveying that require accurate position information. This paper presents experimental results of an accuracy performance test with images of 4cm GSD from a fixed wing UAS to demarcate parcel boundaries in agricultural area. Consequently, the accuracy of boundary point extracted from UAS orthoimage has shown less than 8cm compared with that of terrestrial cadastral surveying. This means that UAV images satisfy the tolerance limit of distance error in cadastral surveying for the scale of 1: 500. And also, the area deviation is negligible small, about 0.2%(3.3m²), against true area of 1,969m² by cadastral surveying. UAV-Photogrammetry is therefore as a promising technology to demarcate parcel boundaries.

• The Korean Journal of Rheology
• /
• v.11 no.1
• /
• pp.1-8
• /
• 1999

This paper experimentally investigates the steady shear behaviors of electro-rheological(ER) fluids under flow mode at high pressure level. As for the ER fluid to be tested, two types of ER fluids are employed; water-based ER fluids (ERF 1, ERF 2) and water-free ER fluid(ERF 3). The water-based ER fluids are composed inhousingly, and the concentrations of dispersed particles are 20 wt% and 30 wt% for ERF 1 and ERF 2, respectively. To generate the flow mode at high pressure, an experimental apparatus operated by two-way hydraulic cylinder is constructed and utilized. The pressure difference is measured by the pressure sensor, while the flow rate is calculated using the measured data of the displacement sensor(LVDT). Consequently, the shear stress and shear rate are distilled by incorporating the measured data; the pressure difference and the flow rate.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.2
• /
• pp.121-129
• /
• 2015

This paper presents a multiple vehicle recognition algorithm based on radar and vision sensor fusion for lane change assistance. To determine whether the lane change is possible, it is necessary to recognize not only a primary vehicle which is located in-lane, but also other adjacent vehicles in the left and/or right lanes. With the given sensor configuration, two challenging problems are considered. One is that the guardrail detected by the front radar might be recognized as a left or right vehicle due to its genetic characteristics. This problem can be solved by a guardrail recognition algorithm based on motion and shape attributes. The other problem is that the recognition of rear vehicles in the left or right lanes might be wrong, especially on curved roads due to the low accuracy of the lateral position measured by rear radars, as well as due to a lack of knowledge of road curvature in the backward direction. In order to solve this problem, it is proposed that the road curvature measured by the front vision sensor is used to derive the road curvature toward the rear direction. Finally, the proposed algorithm for multiple vehicle recognition is validated via field test data on real roads.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.349-355
• /
• 2015

Underwater robots generally show better performances for tasks than humans under certain underwater constraints such as. high pressure, limited light, etc. To properly diagnose in an underwater environment using remotely operated underwater vehicles, it is important to keep autonomously its own position and orientation in order to avoid additional control efforts. In this paper, we propose an efficient method to assist in the operation for the various disturbances of a remotely operated vehicle for the diagnosis of underwater structures. The conventional AHRS-based bearing estimation system did not work well due to incorrect measurements caused by the hard-iron effect when the robot is approaching a ferromagnetic structure. To overcome this drawback, we propose a sensor fusion algorithm with the camera and AHRS for estimating the pose of the ROV. However, the image information in the underwater environment is often unreliable and blurred by turbidity or suspended solids. Thus, we suggest an efficient method for fusing the vision sensor and the AHRS with a criterion which is the amount of blur in the image. To evaluate the amount of blur, we adopt two methods: one is the quantification of high frequency components using the power spectrum density analysis of 2D discrete Fourier transformed image, and the other is identifying the blur parameter based on cepstrum analysis. We evaluate the performance of the robustness of the visual odometry and blur estimation methods according to the change of light and distance. We verify that the blur estimation method based on cepstrum analysis shows a better performance through the experiments.