• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.23-23
• /
• 2003

프리마틴(freemartin)이라 함은 반추동물들 중 특히 소에서 나타나는 간성(intersex)형태로 이성 쌍자의 경우 태어난 암컷의 대부분이 정상적인 자성 생식기의 발육 및 발생양상을 지니지 못하여 생식불능상태로 되는 것으로 알려져 있다. 최근 실용화된 수정란이식이나 쌍자유기 등의 기술은 현재 일반 농가에 까지 정책적으로 확대 보급되어 산업화되고 있는 실정이나 불행히도 이러한 기술들을 이용하여 생산된 개체들 중 상당수가 이성쌍자로 이들 중 암컷 개체들은 거의 freemartin으로 생산되어 실지 노력에 비해 경제적 효과들을 크게 반감시키고 있다. 뿐만 아니라 생산된 freemartin 개체들에 대하여 조기 진단 없이 다만 형태적으로 암컷으로 판단하여 번식우로 사양관리 함에 따른 경제적 손실이 매우 크다 할 수 있겠다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.240.1-240.1
• /
• 2011

본 연구에서는 펄스레이져 박막 증착법(Pulsed Laser Deposition;PLD)을 이용하여 연자성의 CoNiFe (CNF) 물질과 강유전 특성의$BaTiO_3$ (BTO) 물질을 다층박막 구조로 제작하여 약자장(H=200 Oe)에 의해 에너지를 집적 시키거나 유전상수를 조절하여 박막의 구조 변화에 따른 커패시턴스 변화를 연구하였다. 다양한 구조의 다층 박막은 Si/$SiO_2$/Ti/Pt(111) 기판상에 PLD을 이용하여 증착하였으며, Phillp's X-선 회절기 (XRD)를 이용하여 결정구조와 격자 상수를 결정하였다. FE-SEM, TEM, AFM 및 EDS를 이용하여 박막 표면/단면의 미세구조 및 물질에 따른 조성비를 확인하였다. 자기적 특성을 위해Vibrating Sample Magnetometer (VSM)를 측정하였고, 전기적 특성은 LCR meter를 이용하여 측정하였다.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.46-47
• /
• 2017

본 논문에서는 All Metal 용기 가열을 위한 자성체 및 비자성체 용기 판별 제어 알고리즘을 설계한다. 용기 재질과 위치에 따른 파라미터를 분석 후 부하 모델링을 통해 동작 전 용기재질 감지 및 동작 중 용기 사라짐 감지 등을 수행한다. 또한 용기 이외의 숟가락과 같은 물체 판별법을 분석하고 실험을 통해 설계된 알고리즘을 검증한다.

• Journal of the Korean Magnetics Society
• /
• v.2 no.1
• /
• pp.29-36
• /
• 1992

The fundamental research about the amorphous ferrite, which is expected as the important material for electronic and information imdustry in future, was carried out in this work. Because the ferromagnetic amorphous ferrites reported recently are very inferior in magnetic properties than the crystalline ferrites, the development of the more ferromagnetic amorphous ferrites is required. In order to obtain the fundamental data for the preparation of amorphous ferrites, the hand-made twin-roller quenching apparatus was used for rapid quenching. Investigation on amorphous ferrite in the system $CaO-Bi_{2}O_{3}-Fe_{2}O_{3}$ has been carried out in the composition of 10-50 mole% CaO, 10-50 mole% $Bi_{2}O_{3}$, 40-70 mole% $Fe_{2}O_{3}$. Large magnetization values were obtained near the composition of the mixture of $BiFeO_{3}$ and $CaFe_{4}O_{7}$. Especially, an amorphous ${(CaO)}_{20}{(Bi_{2}O_{3})_{15}{(Fe_{2}O_{3})}_{65}$ specimen has a magmetization value of about 21.84 emu/g at 0K(10 kOe). Fe $M\"{o}ssbauer$ absorption spectrum indicates that this specimen is compsed of two amorphous phases, antiferromagnetic phase($\alpha$-phase) and ferromagnetic phase($\beta$-phase). Crystallization of this amorphous ferrite was happened in steps-$550^{\circ}C$ and $775^{\circ}C$, then observed crystal phases were perovskite phase of $BiFeO_{3}$ and $Fe_{2}O_{3}$ phase.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.532-541
• /
• 2001

Developments of nondestructive evaluation techniques for reduction of strength or toughness by aging of material have been carried out, and the method using electrical resistivity is one of them. In this study, to examine the application of electrical resistivity to the evaluation of degradation of metallic alloy, ten different non-magnetic materials were selected as test materials. Electrical resistivities measured by DC two-point probe method and those measured by non-contact type eddy current method were compared with each other. In addition, to examine the application possibility of four-point probe technology in field, the electrical resistivities for 1Cr-lMo-0.25V steel measured by DC two-point probe method and four-point probe method were compared with each other Differences between two measured values for the 1Cr-1Mo-0.25V steel were 0.6%. Therefore, the four-point probe method can be applied to the estimation of the degradation of metallic alloy. ect.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.365-373
• /
• 2008

Fiber Reinforced Polymer, FRP has a light weight, a high tensile strength based on design, non-electronic, non-magnetic, and rust-resistant feature, etc and many researches are being conducted recently on FRP in the construction area. Among them, GFRP (Glass Fiber Reinforced Polymer) is excellent in price competitiveness and is widely being used. However, since GFRP has a relative low modulus of elasticity and causes excessive deflection, the section must be large to be used as a structural component and an investigative review must be carried out in design to set the limit for deflection by the use load. Therefore, in order to solve the mentioned technical problems, this study suggested a section of a module form such that application of a large-scale section is possible. Also, to secure the low rigidity of FRP, this study developed a new FRP+ concrete composite girder form that confined the concrete. To identify the structural movement of the developed FRP+ concrete composite girder, shear strength test was carried out.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.339-345
• /
• 2008

The heat exchanger tube in nuclear power plants is mainly fabricated from nonferromagnetic material such as a copper, titanium, and inconel alloy, but the moisture separator & reheater tube in the turbine system is fabricated from ferromagnetic material such as a carbon steel or ferrite stainless steel which has a good mechanical properties in harsh environments of high pressure and temperature. Especially, the moisture separator & reheater tubes, which use steam as a heat transfer media, typically employ a tubing with integral fins to furnish higher heat transfer rates. The ferromagnetic tube typically shows superior properties in high pressure and temperature environments than a nonferromagnetic material, but can make a trouble during the normal operation of power plants because the ferrous tube has service-induced damage forms including a steam cutting, erosion, mechanical wear, stress corrosion cracking, etc. Therefore, nondestructive examination is periodically performed to evaluate the tube integrity. Now, the remote field testing(RFT) technique is one of the solution for examination of ferromagnetic tube because the conventional eddy current technique typically can not be applied to ferromagnetic tube such as a ferrite stainless steel due to the high electrical permeability of ferrous tube. In this study, we have designed RFT probes, calibration standards, artificial flaw specimen, and probe pusher-puller necessary for field application, and have successfully carry out RFT examination of the moisture separator & reheater tube of nuclear power plants.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.118-124
• /
• 2005

We have obtained sharp and clearly resolved ESR spectra of $Nd^{3+}$ and $Er^{3+}$ in vapor transport equilibrium (VTE) treated $LiNbO_3$ crystals, consequently have determined more accurate spin Hamiltonian parameters, than those in congruent samples. The anisotropic hyperfine structures of $^{143}Nd^{3+}$ and $^{145}Nd^{3+}$ in the VTE-treated crystals at liquid helium temperature have been analyzed. It is proposed that both rare earth ions favor the lithium site in $LiNbO_3$ from the consideration of the determined anisotropic g-values.

• Economic and Environmental Geology
• /
• v.32 no.4
• /
• pp.353-363
• /
• 1999

The Cretaceous and the Upper Jurassic strata of the Korean Peninsula, entirely of continental facies, form a sedimentary mega-unit subdivided into three unconformity-bounded units. The lower, Upper Jurassic-early Lower Cretaceous unit (Jasong Synthem) occurs profusely in North Korea and is characterized by volcanic rocks of intermediate to acidic, calc-alkaline to alkaline compositions; but strata of this unit is very rare in South Korea. The middle, Hauterivian-Lower Albian unit occurs commonly in the Korean Peninsula, but some alkalinesubalkaline basalt and andesite occur only in South Korea. A recently obtained U-Pb isochron age about 113.6 Ma (Chang et at, 1998) from the zircon grains of the Kusandong Tuff in the uppermost part of the Haman Formation has thrown much light on the age of this unit. The stratotype of this Hauterivian-L. Albian unit is the Sindong and Hayang Groups of the Kyongsang Basin, where the unit is about twice thick and has more conglomerates than in sedimentary basins in North Korea. The unit shows various sedimentary cycles in different basins showing that the cyclicity is controlled by local crustal motion. The upper, Upper Albian-Upper Cretaceous unit is abundant in South Korea with prolific volcanic rocks which are intermediate to acidic and notably calc-alkaline. In North Korea, however, this unit occurs in only one locality without volcanic rocks and is not voluminous. The distribution of these three unconformity-bounded units shows a stepwise younging toward the Pacific Ocean: the lower unit occurs mainly in N Korea, the middle unit occurs in both N and S Korea, and the upper unit occurs mainly in the southern part of S Korea. The Cretaceous sedimentary basins of S Korea were genetically controlled by paralleling sinistral strike-slip faults parallel to the Pacific margin.

• Journal of KIISE:Software and Applications
• /
• v.30 no.1_2
• /
• pp.58-72
• /
• 2003

The objects generated by the keyword new in Java are automatically managed by the garbage collector Inside Java Virtual Machine (JVM) not like using the keywords free or delete in C or C++ programming environments. This provides a means of freedom of memory management burden to the application programmers. The garbage collector however. inherently has its own run time execution overhead. Thus it causes the performance degradation of JVM significantly. In order to mitigate the execution burden of a garbage collector, we propose a novel way of dynamic memory management scheme in Java environment. In the proposed method, the application programmers can explicitly manage the objects In a simple way, which in consequence the run-time overhead can be reduced while the garbage collector is under processing. In order to accomplish this, Java application firstly calls the APIs that arc implemented by native Jana, and then calls the subroutines depending on the JVM, which in turn support to keep the portability characteristic Java has. In this way, we can not only sustain the stability in execution environments. but also improve performance of garbage collector by simply calling the APIs. Our simulation study show that the proposed scheme improves the execution time of the garbage collector from 10.07 percent to 52.24 percent working on Mark-and-Sweep algorithm.