• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.260-260
• /
• 2011

투명 비정질 산화물반도체는 디스플레이의 구동소자인 박막 트랜지스터에 채널층으로 사용된다. 또한 투명하면서 유연성이 있는 소자를 저비용으로 제작할 수 있는 장점을 가진다. 투명 산화물반도체 재료 중 IGZO는 Si 또는 GaAs와 같은 공유결합성 반도체와는 다른 전자 배치로 전도대가 금속이온의 ns 궤도에서 형성되며, 가전도대가 산소 음이온의 2p 궤도에서 형성된다. 특히 큰 반경의 금속 양이온은 인접한 양이온과 궤도 겹침이 크게 발생하게 되며 캐리어의 효과적인 이동 경로를 제공해줌으로써 다른 비정질 반도체와는 다르게 높은 전하이동도(~10 $cm^2$/Vs)를 가진다. 따라서 저온공정에서 우수한 성능의 TFT소자를 제작할 수 있는 장점이 있다. 본 연구에서는 TFT 채널층으로 사용하기 위한 a-IGZO박막의 산소분압에 따른 특성변화를 분석 하였다. a-IGZO박막은 Pulsed Laser Deposition (PLD)를 이용하여 산소분압(20~200 mTorr) 변화에 따라 Glass기판에 증착하였다. 증착된 a-IGZO 박막의 구조적 특성으로는 X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), 광학적 특성은 UV-vis spectroscopy 분석을 통해서 알아보았다. TFT 채널층의 조건으로는 낮은 off-current, 높은 on-off ratio를 위해 고저항 ($10^3\;{\Omega}cm$)의 진성반도체 성질과 source/drain금속과의 낮은 접촉저항(ohmic contact) 등의 전기적 성질이 필요하다. 따라서 이러한 전기적 특성확인을 위해 transmission line method (TLM)을 사용하여 접촉저항과 비저항을 측정하였고, 채널층으로 적합한 분압조건을 확인해볼 수 있었다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.210-216
• /
• 2002

Air abrasion technology can prepare enamel and dentin for bonding, similar to etching by acidic gels and solutions. Longer treatment can excavate pit and fissures, preparing the tooth for immediate placement of bonded resin materials. Although not appropriate for every clinical situation, the air abrasive technology minimizes heat, vibration and bone-conducted noise associated with conventional means of caries removal since the cutting is accomplished by air pressure. Also, patients treated with the air-abrasion technology rarely request anesthesia. Air abrasion technology was more effective in treating early carious lesions and stains compared to lesions where caries had already progressed to produce soft dentin and the strong air stream and noise caused by the evacuation system was a major discomfort to pediatric patients, and the experience and skillfulness of clinician should be required for accurate and proper tooth preparation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1752-1757
• /
• 2011

In a traditional phased array radar, closely spaced antenna elements transmit a scaled version of single waveform to maximize the signal energy. On the contrary, a multiple-input multiple-output (MIMO) radar consists of widely separated antennas and transmits an arbitrary waveform from each antenna element. These waveforms and spatial diversity enable superior capabilities compared with phased array radar. At high signal-to-noise ratio (SNR), the detection performance of the MIMO radar is better than the phased array radar due to the diversity gains. However, the phased array radar outperforms the MIMO radar at low SNR, due to the energy maximization. In this paper, we investigate the compromised scheme between the MIMO radar and the phased array radar. Employing the MIMO radar equipped with phased array elements, the compromised scheme achieves both array gain and diversity gain. Also, we compare the performance degradation when the steering direction is incorrect.

• KIISE Transactions on Computing Practices
• /
• v.21 no.10
• /
• pp.631-638
• /
• 2015

Today, the demand for speech recognition systems in mobile environments is increasing rapidly. This paper proposes a novel method for Korean phoneme segmentation that is applicable to a phoneme based Korean speech recognition system. First, the input signal constitutes blocks of the same size. The proposed method is based on a volatility indicator calculated for each block of the input speech signal, and the bulk indicators calculated for each bulk in blocks, where a bulk is a set of adjacent samples that have the same sign as that of the primitive indicators for phoneme segmentation. The input signal vowels, voiced consonants, and voiceless consonants are sequentially recognized and the boundaries among phonemes are found using three devoted recognition algorithms that combine the two types of primitive indicators. The experimental results show that the proposed method can markedly reduce the error rate of the existing phoneme segmentation method.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.84-89
• /
• 2021

The alternative method for symmetric configuration in optical link consisted of dispersion management and optical phase conjugation for compensating of the distorted optical signals due to chromatic dispersion and nonlinear effects of standard single mode fiber is proposed. The symmetric configuration means number of fiber spans, dispersion distribution in former half section and latter half section, etc should be symmetrical about optical phase conjugator. In dispersion-managed proposed in this research, optical phase conjugator is located after former half section consisted of 6 fiber spans and before latter half section of 14 fiber spans, and the averaged residual dispersion per span (RDPS) of each half section are consistence. The compensation effects of the distorted signals in the proposed link is analyzed by comparing with the results obtained in dispersion-managed link with the unequally averaged RDPS of each half section. From the simulation results, it is confirmed that RDPS deviation between adjacent fiber span has a grater effect on the compensation than the equivalent of the averaged RDPS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.2
• /
• pp.103-111
• /
• 2023

This paper proposes a new data correction technique that transforms anomalies in time series data into normal values. With the recent development of IT technology, a vast amount of time-series data is being collected through sensors. However, due to sensor failures and abnormal environments, most of time-series data contain a lot of anomalies. If we build a predictive model using original data containing anomalies as it is, we cannot expect highly reliable predictive performance. Therefore, we utilizes the LSTM-GAN model to detect anomalies in the original time series data, and combines DTW (Dynamic Time Warping) and GAN techniques to replace the anomaly data with normal data in partitioned window units. The basic idea is to construct a GAN model serially by applying the statistical information of the window with normal distribution data adjacent to the window containing the detected anomalies to the DTW so as to generate normal time-series data. Through experiments using open NAB data, we empirically prove that our proposed method outperforms the conventional two correction methods.

• Composites Research
• /
• v.36 no.1
• /
• pp.25-31
• /
• 2023

Composite structures have been designed by stacking the laminae with different stacking angles to meet the required mechanical performance. Although the induced stresses on the composite structures under the external loads usually differ depending on the location, we determined the stacking sequence based on the maximum stress, which leads to low efficiency and generally is not the optimum design. Recently, piecewise integrated composites (PICs) were suggested for solving this inefficiency. PICs assume the perfect bonding between adjacent pieces, but this is ideal and hard to accomplish. Therefore, the overlap at the boundary is essential to prevent separation from each other. In this study, we investigated the effect of the overlap design on the impact failure mode of PIC plates. We fabricated the sample composite plates with different overlap designs using the fast curing carbon prepreg and conducted the impact tests according to ASTM D 7136. We found that PICs had different failure modes according to the overlap design, which lead the changes of absorbed impact energies as well as impact load curves.

• The Korean Journal of Nuclear Medicine
• /
• v.39 no.6
• /
• pp.421-429
• /
• 2005

Purpose: It has been postulated that dopamine release in the striatum underlies the reinforcing properties of nicotine. Substantial evidence in the animal studies demonstrates that nicotine interacts with dopaminergic neuron and regulates the activation of the dopaminergic system. The aim of this study was to visualize the dopamine release by smoking in human brain using PET scan with $[^{11}C]raclopride$. Materials and Methods: Five male non-smokers or ex-smokers with an abstinence period longer than 1 year (mean age of $24.4{\pm}1.7$ years) were enrolled in this study $[^{11}C]raclopride$, a dopamine D2 receptor radioligand, was administrated with bolus-plus-constant infusion. Dynamic PET was performed during 120 minutes ($3{\times}20s,\;2{\times}60s,\;2{\times}120s,\;1{\times}180s\;and\;22{\times}300s$). following the 50 minute-scanning, subjects smoked a cigarette containing 1 mg of nicotine while in the scanner. Blood samples for the measurement of plasma nicotine level were collected at 0, 5, 10, 15, 20, 25, 30, 45, 60, and 90 minute after smoking. Regions for striatal structures were drawn on the coronal summed PET images guided with co-registered MRI. Binding potential, calculated as (striatal-cerebellar)/cerebellar activity, was measured under equilibrium condition at baseline and smoking session. Results: The mean decrease in binding potential of $[^{11}C]raclopride$ between the baseline and smoking in caudate head, anterior putamen and ventral striatum was 4.7%, 4.0% and 7.8%, respectively. This indicated the striatal dopamine release by smoking. Of these, the reduction in binding potential in the ventral striatum was significantly correlated with the cumulated plasma level of the nicotine (Spearman's rho=0.9, p=0.04). Conclusion: These data demonstrate that in vivo imaging with $[^{11}C]raclopride$ PET could measure nicotine-induced dopamine release in the human brain, which has a significant positive correlation with the amount or nicotine administered bt smoking.

• The KIPS Transactions:PartB
• /
• v.9B no.3
• /
• pp.375-382
• /
• 2002

Handwritten character recognition is classified into on-line handwritten character recognition and off-line handwritten character recognition. On-line handwritten character recognition has made a remarkable outcome compared to off-line hacdwritten character recognition. This method can acquire the dynamic written information such as the writing order and the position of a stroke by means of pen-based electronic input device such as a tablet board. On the contrary, Any dynamic information can not be acquired in off-line handwritten character recognition since there are extreme overlapping between consonants and vowels, and heavily noisy images between strokes, which change the recognition performance with the result of the preprocessing. This paper proposes a method that effectively extracts the stroke including dynamic information of characters for off-line Korean handwritten character recognition. First of all, this method makes improvement and binarization of input handwritten character image as preprocessing procedure using watershed algorithm. The next procedure is extraction of skeleton by using the transformed Lu and Wang's thinning: algorithm, and segment pixel array is extracted by abstracting the feature point of the characters. Then, the vectorization is executed with a maximum permission error method. In the case that a few strokes are bound in a segment, a segment pixel array is divided with two or more segment vectors. In order to reconstruct the extracted segment vector with a complete stroke, the directional component of the vector is mortified by using right-hand writing coordinate system. With combination of segment vectors which are adjacent and can be combined, the reconstruction of complete stroke is made out which is suitable for character recognition. As experimentation, it is verified that the proposed method is suitable for handwritten Korean character recognition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1050-1057
• /
• 2006

This paper proposes a new predistortion linearizer with amplitude modulator and PFG(Polar Function Generator) using second order harmonic signals. This linearizer consists of PFG that combine with in-phase and quadrature-phase of second harmonic signals and amplitude modulator in main path. The predistorted third order intermodulation distortion(IMD3) signals that are generated by amplitude modulator with fundamental and PFG signals, improve a amplifier nonlinear characteristics. The proposed linearizer and amplifier have been manufactured and tested to operate in cellular base-station transmitting band$(869\sim894MHz)$. The test results show that IMD3 can be removed by more than 22.5 dB in case of CW 2-tone signals ${\Delta}f=1$ MHz, and the adjacent channel power ratio(ACPR) also can be improved by more than 8.4 dB for CDMA IS-95 1FA signals.