• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.65-73
• /
• 2019

In order to increase the production efficiency of the ship and shorten the production cycle, it is important to evaluate the accuracy of the ship components efficiently during the drying cycle. The accuracy control of the block is important for shortening the ship process, reducing the cost, and improving the accuracy of the ship. Some systems have been developed and used mainly in large shipyards, but in some cases, they are measured and managed using conventional measuring instruments such as tape measure and beam, optical instruments as optical equipment, In order to perform accuracy control, these tools and equipment as well as equipment for recording measurement data and paper drawings for measuring the measurement position are inevitably combined. The measured results are managed by the accuracy control system through manual input or recording device. In this case, the measurement result is influenced by the work environment and the skill level of the worker. Also, in the measurement result management side, there are a human error about the lack of the measurement result creation, the lack of the management sheet management, And costs are lost in terms of efficiency due to consumption. The purpose of this study is to improve the working environment in the existing accuracy management process by using the augmented reality technology to visualize the measurement information on the actual block and to obtain the measurement information And a smart management system based on augmented reality that can effectively manage the accuracy management data through interworking with measurement equipment. We confirmed the applicability of the proposed system to the accuracy control through the prototype implementation.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1125-1139
• /
• 2022

In an unmanned aerial vehicles (UAVs) system, a physical offset can be existed between the global positioning system/inertial measurement unit (GPS/IMU) sensor and the observation sensor such as a hyperspectral sensor, and a lidar sensor. As a result of the physical offset, a misalignment between each image can be occurred along with a flight direction. In particular, in a case of multi-sensor system, an observation sensor has to be replaced regularly to equip another observation sensor, and then, a high cost should be paid to acquire a calibration parameter. In this study, we establish a precise sensor model equation to apply for a multiple sensor in common and propose an independent physical offset estimation method. The proposed method consists of 3 steps. Firstly, we define an appropriate rotation matrix for our system, and an initial sensor model equation for direct-georeferencing. Next, an observation equation for the physical offset estimation is established by extracting a corresponding point between a ground control point and the observed data from a sensor. Finally, the physical offset is estimated based on the observed data, and the precise sensor model equation is established by applying the estimated parameters to the initial sensor model equation. 4 region's datasets(Jeon-ju, Incheon, Alaska, Norway) with a different latitude, longitude were compared to analyze the effects of the calibration parameter. We confirmed that a misalignment between images were adjusted after applying for the physical offset in the sensor model equation. An absolute position accuracy was analyzed in the Incheon dataset, compared to a ground control point. For the hyperspectral image, root mean square error (RMSE) for X, Y direction was calculated for 0.12 m, and for the point cloud, RMSE was calculated for 0.03 m. Furthermore, a relative position accuracy for a specific point between the adjusted point cloud and the hyperspectral images were also analyzed for 0.07 m, so we confirmed that a precise data mapping is available for an observation without a ground control point through the proposed estimation method, and we also confirmed a possibility of multi-sensor fusion. From this study, we expect that a flexible multi-sensor platform system can be operated through the independent parameter estimation method with an economic cost saving.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.669-681
• /
• 2023

Studies have tried to apply remote sensing technology, a non-destructive survey method, instead of the existing destructive survey, which requires relatively large labor input and a long time to estimate chlorophyll content, which is an important indicator for evaluating the growth of fruit trees. This study was conducted to non-destructively evaluate the chlorophyll content of pear tree leaves using unmanned aerial vehicle-based hyperspectral imagery for two years(2021, 2022). The reflectance of the single bands of the pear tree canopy extracted through image processing was band rationed to minimize unstable radiation effects depending on time changes. The estimation (calibration and validation) models were developed using machine learning algorithms of elastic-net, k-nearest neighbors(KNN), and support vector machine with band ratios as input variables. By comparing the performance of estimation models based on full band ratios, key band ratios that are advantageous for reducing computational costs and improving reproducibility were selected. As a result, for all machine learning models, when calibration of coefficient of determination (R²)≥0.67, root mean squared error (RMSE)≤1.22 ㎍/cm², relative error (RE)≤17.9% and validation of R²≥0.56, RMSE≤1.41 ㎍/cm², RE≤20.7% using full band ratios were compared, four key band ratios were selected. There was relatively no significant difference in validation performance between machine learning models. Therefore, the KNN model with the highest calibration performance was used as the standard, and its key band ratios were 710/714, 718/722, 754/758, and 758/762 nm. The performance of calibration showed R²=0.80, RMSE=0.94 ㎍/cm², RE=13.9%, and validation showed R²=0.57, RMSE=1.40 ㎍/cm², RE=20.5%. Although the performance results based on validation were not sufficient to estimate the chlorophyll content of pear tree leaves, it is meaningful that key band ratios were selected as a standard for future research. To improve estimation performance, it is necessary to continuously secure additional datasets and improve the estimation model by reproducing it in actual orchards. In future research, it is necessary to continuously secure additional datasets to improve estimation performance, verify the reliability of the selected key band ratios, and upgrade the estimation model to be reproducible in actual orchards.

• Journal of Korean Society of Forest Science
• /
• v.86 no.3
• /
• pp.334-341
• /
• 1997

Artificial precipitation test with sprinkler system was carried out to develop the collection method of arboreal larvae(proctotrupoid wasps) of pine needle gall midge for biological control in 1995. Effects of larvae falling on each amount of precipitation, season of precipitation and time of precipitation of a day following artificial precipitation were examined during the period of larvae falling season. The results obtained were summarized as follows; 1. Artificial precipitation with sprinkler system was highly effective for collection of pine needle gall midge larvae and the most suitable amount of precipitation was 5.3-9.4mm; application amount and hours of water were $8,000-16.000{\ell}$ and 180-360 minutes, respectively. 2. The most effective period of larvae collection for artificial precipitation was approximately 20 days, from early through mid November, and larvae falling was 93.4% of the total number of larvae collection during this period. 3. Larvae falling from the tree crown was not affected by the artificial precipitation for the precipitation hour intervals in a day. 4. The percentage of parasitism of collected larvae of pine needle gall midge in November exceeded that of December but was not significantly different between two seasons. 5. Artificial precipitation of sprinkler system was effective in reducing 34% of gall formation after one year at collected sites of pine needle gall midge larvae. 6. The collection method of larvae following artificial precipitation was effective in reducing the expenses by 14-50% than that of collection method of infested needles.

• Journal of Animal Science and Technology
• /
• v.51 no.5
• /
• pp.353-360
• /
• 2009

When 14 microsatellite (MS) markers were applied in the identifying test for 480 Hanwoo, the discriminating power was estimated as $3.43{\times}10^{-27}$ based on the assumption of a random mating group (PI). This rate is 1,000 times higher than that of 60 single nucleotide polymorphism (SNP) markers. On the other hand, the power of the 60 SNP markers was estimated as $4.69{\times}10^{-20}$ and $8.02{\times}10^{-12}$ on the assumption of a half-sib mating group ($PI_{half-sibs}$) and a full-sib mating group ($PI_{sibs}$), respectively. These powers were 10 times and 10,000 times higher than those of the 14 MS markers. The results indicated that the total number of alleles (MS vs SNP = 146 vs 120) acted as a key factor for the discriminating power in a random mating population, and the total number of markers (MS vs SNP = 14 vs 60) was a dominant influence on the power in half-sib and full-sib populations. In the Hanwoo population, in which it was assumed that the entire population is the enormous half-sib group formed by the absolute genetic contribution of a few nuclear bulls, there will be only a 10 times difference in the discriminating power between the 14 MS markers and the 60 SNP makers. However, the probability of not excluding a candidate parent pair from the parentage of an arbitrary offspring, given that only the genotype of the offspring ($PNE_{pp}$) was 1,000 times higher as shown by the 14 MS markers than that by the 60 SNP markers. The strong points of SNP makers are the stability of the variation (low mutation rate) and automation of high-throughput genotyping. In order to apply these merits for the practical and constant Hanwoo identity test, research and development are required to set a cost-effective platform and produce a homemade apparatus for SNP genotyping.

• Journal of the Korean Geographical Society
• /
• v.29 no.4
• /
• pp.402-419
• /
• 1994

Telecommunication and intormation technology have been conceived as crucial as well as revolutionary elements for recent and future social and economic development, and their development have led to a spatial reorganization and locational change of economic activities. Information technology has resulted in important changes in the organization structure and location of firm. This study draws attention to the understanding of the relationship between the diffusion of information technology and changes in firm activities with the special reference to the service industry of the United States. Information technology has had a significant impact on the growth and changes of the service industry of the United States through changes in the organizational and employment structure, market structure, and locational changes. The impact of information technology on location changes of the service industry shows two opposite patterns, concentration and decentralization. Among these patterns, the location change in the service industry of the United States reveals predominantly the decentralization tendency such as suburbanization and transfer to lower ranking cities rather than concentration. In case of Korea, however, it is anticipated that the rapid development of information technology may lead to the concentration of the service industry in Seoul and Capital region.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.4
• /
• pp.67-76
• /
• 2013

Landfill require special care due to the dangers of nearby surface water and underground water pollution caused by leakage of leachate. The leachate does not leak due to the installation of the geomembrane but sharp wastes or landfill equipment can damage the geomembrane and therefore a means of protecting the geomembrane is required. In Korea, in accordance with the waste control act being modified in 1999, protecting the geosynthetics liner on top of the slope of landfill and installing a drainage layer to fluently drain leachate became mandatory, and technologies are being researched to both protect the geomembrane and quickly drain leachate simultaneously. Therefore, this research has its purpose in studying the drainage functions of leachate and protection functions of the geomembrane in order to examine the application possibilities of Geo-Multicell-Composite (GMC) as a Leachate Collection Removal and Protection System (LCRPs) at the slope on top of the geomembrane of landfill by observing methods of inserting filler with high-quality water permeability at the drainage net. GMC's horizontal permeability coefficient is $8.0{\times}10^{-4}m^2/s$ to legal standards satisfeid. Also crash gravel used as filler respected by vertical permeability is 5.0 cm/s, embroidering puncture strength 140.2 kgf. A result of storm drain using artificial rain in GMC model facility, maxinum flow rate of 1,120 L/hr even spray without surface runoff was about 92~97% penetration. Further study, instead of crash gravel used as a filler, such as using recycled aggregate utilization increases and the resulting construction cost is expected to savings.

• Journal of the Korean Geographical Society
• /
• v.38 no.3
• /
• pp.400-412
• /
• 2003

It is now widely recognized that new Information and Communication Technologies (ICTs) have been changing the way tv which firms conduct their businesses. Examples are the application of enterprise resources planning (ERP) and business process reengineering (BPR) to increase the efficiency of internal resources management, adoption of Business-to-Business e-commerce (B2B e-com) to integrate supply chain, and invention of new marketing channels such as Business-to-Customer (B2C) e-com. These new ways of conducting businesses are believed to help firms to reduce transaction costs and increase productivity. As a result, new ICTs have played an important role in recent growth of many small firms into multi-functional and multi-product corporations and in their spatial expansion towards internationalization as well. This paper takes Haier in China as a case to study the role of new ICTs in the growth of firms and reveal how the new technologies have facilitated the expansion of Haier into a transnational corporation (TNC) by examining the internationalization process of the firm in relation to its adoption of new ICTs in the period from 1990 to 2002. The study reveals that the adoption of new Ins has helped Haier to integrate its functional units located in dozens of places across the world, which is essential to the internationalization of a firm, and to link closely together its worldwide suppliers and customers to achieve just-in-time (JIT) production and delivery. As such, the authors of the paper argue that, without the facilitation of new ICTS, Haier could not have developed into a TNC in less than ten years.It is now widely recognized that new Information and Communication Technologies (ICTs) have been changing the way tv which firms conduct their businesses. Examples are the application of enterprise resources planning (ERP) and business process reengineering (BPR) to increase the efficiency of internal resources management, adoption of Business-to-Business e-commerce (B2B e-com) to integrate supply chain, and invention of new marketing channels such as Business-to-Customer (B2C) e-com. These new ways of conducting businesses are believed to help firms to reduce transaction costs and increase productivity. As a result, new ICTs have played an important role in recent growth of many small firms into multi-functional and multi-product corporations and in their spatial expansion towards internationalization as well. This paper takes Haier in China as a case to study the role of new ICTs in the growth of firms and reveal how the new technologies have facilitated the expansion of Haier into a transnational corporation (TNC) by examining the internationalization process of the firm in relation to its adoption of new ICTs in the period from 1990 to 2002. The study reveals that the adoption of new Ins has helped Haier to integrate its functional units located in dozens of places across the world, which is essential to the internationalization of a firm, and to link closely together its worldwide suppliers and customers to achieve just-in-time (JIT) production and delivery. As such, the authors of the paper argue that, without the facilitation of new ICTS, Haier could not have developed into a TNC in less than ten years.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.183-194
• /
• 2004

The existing management job of research expenses has been divided into three parts： budget planning, budget draw-up, and exact settlement of budget. However, it caused some problems. Under this current circumstance it is required to obtain research expenses steadily, to operate efficiently and to use them clearly to solve such problems. As a result of a study on data warehouse development process of existing system integration company (Inmon, IBM) to reflect current trend described above, data warehouse development process of Inmon uses systematic and gradual access as a classical development cycle method. It causes overlap and feedback to the previous step in the process of each step Is requested. And another problem that it is difficult to toil what function refers and corrects data because functions and data are separated during performing development process at data warehouse development process of IBM is caused. Integrated management data warehouse development process of research expenses in the enterprise environment which applies UML at planning and analysis step, design step and implement and test step is suggested in this paper. Information retrieval agent uses existing budget plan DB, budget draw-up DB and budget settlement DB to find out information that a user wants to know. Information retrieval agent collects and saves information at integration database and information integration agent extracts, transports, transforms and loads the data. Information integration agent reduces a user's efforts to access to a number of information sources and check each of them. It also screens out data that a user may not need. As a result, integrated management data warehouse development process of research expenses in the enterprise environment reflects a user's requirements as much as possible and provides various types of information to make a decision which is needed to establish the policy of research expense management. It helps an end user approach his/her desired analysis information quickly and get various data from the comprehensive viewpoint rather than the fragmentary viewpoint. Furthermore, as it integrated three systems into one, it is possible to share data, to integrate the system, to reduce operating expenses and to simplify supporting environment for the decision making.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1697-1707
• /
• 2006

Relentless advances in information technology are constantly transforming market dynamics of the retail industry. RFID is an emerging innovative technology that can reduce labor costs, improve inventory control and increase sales by effective business processes. Apparel retailers need to recognize the benefits of RFID and identify critical success factors. By focusing on apparel retailers, this study attempts (1) to identify the reality of RFID associated with benefits; and (2) to prospect the implementation of RFID in apparel retailing. We conducted a focus group interview with selected six panels who were experts of retail industry in the United States to obtain data regarding RFID attributes. Content analysis was used to generate related excerpts and classify 31 attributes of RFID benefits from the meaningful 173 responses. For experience of RFID, retailers were familiar with RFID technology and expressed the belief that RFID basically would support an existing retail system for speed to markets. However, retailers addressed the level of experience with RFID technology that they were still in the early adoption stage among few innovative companies. The content analysis identified five dimensions of RFID benefits for apparel retailing: Visibility and Velocity, Revenue Enhancement, Customer Service, Security, and Employee Productivity. This result lends support to the belief that RFID has a significant potential to streamline supply chain management, store operation and customer service for apparel retailing. This study provides intellectual and managerial implications far practitioners and researchers by postulating the effective use of RFID in the apparel retail industry.