• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.590-597
• /
• 2002

LNG고압펌프계통은 천연가스 고압 송출에 있어 가용도가 매우 중요한 계통이다. 본 연구에서는 현재 적용되고 있는 예방(계획)정비주기를 가용성 측면에서 재검토했다. 확률적인 운전대수와 운전 및 보전 형태에 연관된 여러제약이 고려할 때 계통 불가용도를 정량화하기 위하여 시뮬레이션 기법을 적용했다. 중도 절단된 형태의 펌프 수명 데이터를 분석해 욕조형의 고장율 함수를 도출했으며 보수시간 데이터를 분석해 확률분포모수를 구했다. 또한 주요 펌프부대설비에 대해서는 상수형의 고장율과 보전율을 도출했다. 분석된 확률모수를 작성된 시뮬레이션 모형에 입력하고 과거의 운전대수 시나리오를 설정해 실험한 결과와 실제 보수 및 운전 자료를 비교해 모형의 유효성을 보였다. 그리고 차후 예상되는 운전요구대수 시나리오를 기정하고 각 예방정비주기별로 반복 실험하여 계통의 불가용도를 보이고 적합한 예방정비주기를 도출했으며 펌프부품 교체비용의 기대 절감액을 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.1
• /
• pp.47-49
• /
• 2003

The cost of material and slicing of silicon wafer occupied more than 30% of solar cell manufacturing cost. The substitution of silicon wafer into STS 304 stainless steel could be the promising solution to decrease the material cost. Moreover the stainless steel solar cell could have the advantage of low weight and durability. However, the highly polished surface is required to meet the characteristic of solar cell. The electropolishing process in phosphoric acid based solution was used to get the surface quality. The obtained result was 28 nm obtained in current density of 2Amfi/$cm^2$ at $80^{\circ}C$. The leveller effect of glycerine, ethylene glycol and propylen glycol was studied. When the 0.4 g/l of ethylene glycol was added to the electrolyte, the surface roughness was best, 15 nm.

• International Area Studies Review
• /
• v.12 no.2
• /
• pp.149-173
• /
• 2008

This paper empirically studies the relationship between R&D expenditures and firms value. First, we can conjecture that R&D expenditures are enhancing the firms value. Such findings depend on an existing research, which R&D expenditures are intangible asset rather than expenses. Although, under U.S. accounting standards, financial statements do not report intangible assets but costs. Second, we can conjecture that short-term, the rate of increase in R&D expenditures had negative influence on firms valuation, because such findings indicates that R&D spending of costs incur mis-pricing. But long-term, consistently R&D expenditures may attract investors on the stock market. Third, lately firms focus on capital efficiency management, such a firms R&D expenditures incur high ROE. Generally investors put too much confidence in capital efficiency management and high ROE may attract investors on the stock market. Finally, High-Tech through the R&D investment improve firms competitive advantage, by competitive advantage, firms have reduced cost and raised productivity in the end improve firms value.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.111-115
• /
• 2011

Purpose: In vitro uses dose response curve with 6 to 7 standard concentrations in every examination to analyze examination results and this use of dose response curve comprises a large portion of the consumption of medicine material. At this present, some ones of in-hospital examination items have shown mostly low result of distribution in the analyzed features and these examinations have been judged that it would be unnecessary to use the last standard concentration. Hence, this study selects those examination items showing low result of distribution and reviews the cases contributed to less consumption of medicine material and revenue growth of hospital by reduction of medicine material used in the place of the last standard concentration. Materials and Methods: The study was made targeting 11 examination items out of total 43 items of the in-hospital examination and since these examination items were mostly low in the features as the examination results of patients or the examination results were distributed to show lower concentration than the previous last standard concentration, it carried out the examination without using the last standard concentration, which could generate the effect to reduce medicine material (examination tube) used in the last standard concentration as many as the number of examination carried out. For this, it examined the number of medicine material reduction by month during the period from July, 2009 to February, 2011 and estimated the reduction amount of medicine material calculated the number of reduction by the unit cost of medicine material as well as the profit generated by the reduced medicine material to use for the medicine material of patient examination. Results: The total number of medicine material reduced during the period from July, 2009 to February, 2011 was 3,131 pieces, which had the effect to reduce the medicine material equivalent to about 31 kits of reagent. To calculate this by the unit cost of the medicine material, it analyzed to reduce about 6.4 million won of medicine material cost. Also the reduced medicine materials were used for medicine materials of patient examination and this was analyzed to generate about 13.75 million won of profit based on the ABC cost accounting. Conclusion: It showed no problem in the analysis of examination result even without using the last standard concentration regarding those examination items with low distribution of the patient examination result. For these examination items, it was able to reduce medicine material used for the last standard as many as the number of examination carried out. Also, the adjustment of concentration range was found to have no problem in the reliability of examination result. Therefore, this case will be applicable in those occasions of when the analysis of patient examination result is mostly distributed at the lower level or when an examination with the distribution of patient results in the range of lower concentration than the previous last standard concentration is carried out and this is considered to increase the efficiency in the use of medicine material in vitro as well as contribute to the profit of hospitals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.612-618
• /
• 2020

In recent years, the demand for external window cleaning has increased, but the process is a very dangerous manpower-dependent operation. In addition, it is difficult to clean at the desired frequency in a business that values cleanliness. Therefore, there is a need to automate this work. This paper presents the concept of a device that can be attached to a specific window and clean the window continuously. The economic feasibility of this device was analyzed. The estimated manufacturing cost of the equipment was approximately 10 million won, but the possible investment cost was at least 9.8 million won for five years of endurance and 103 million won for 10 years of endurance. Therefore, the expected savings well exceed the equipment cost, and it was evaluated as having economic feasibility. Since this study analyzed only quantitative indicators, the expected cost reduction due to a reduction in safety accidents, productivity improvement, construction time reduction, and quality improvement was not considered. Therefore, it is expected that the calculated economic feasibility will be more accurate if the cost reduction effect by the automation equipment is calculated by adding the expected values not considered in this study.

• Journal of radiological science and technology
• /
• v.30 no.2
• /
• pp.167-175
• /
• 2007

There are some positive effects by the introduction of PACS(Picture Archiving Communication System). This study is to analyze the mutual relation between before and after of the introduction of PACS in terms of the environment effect. It is supposed to cause the reduction of developing and fixing wastewater according to the increase in the rate of a non-film. This study will also show the amount of wastewater. Target places were the department of image medicine(diagnostic radiation) of the general hospitals in Seoul and Gyeonggi-Do, which are equiped with full PACS. The authors examined questionnaires on the number of projection, the number of indirect projection, the amount of the film used, the number of radiation image CD loan, the amount of the developing and fixing solution used, the change of the amount of fixing wastewater. According to the analysis, we analyzed the change of the amount of developing and fixing solution per a film and the change of the amount of developing and fixing wastewater which is supposed to be reduced proportionally by the introduction of PACS. We got conclusion as below after analyzing 8 hospitals except the largest and the least amount of examination, film used, developing and fixing solution and the amount of developing and fixing wastewater in order to decrease the deviation from 10 general hospitals located in Seoul and Gyeonggi-Do. We compared data one year before adopting PACS Versus 3 years after adopting PACS. 1. The frequences of examination increased to 7,357.7 cases per month but the amount of film used decreased to 90%, from 42,774.4 to 4,181.88 after adopting the PACS. 2. 3 years after adopting PACS, monthly average amount of developing solution used decreased to 92% and the monthly average amount of fixing solution decreased to 86%. 3. Monthly average amount of developing solution used per film increased to 1.49 times and fixing solution increased as much as three times. 4. Monthly average wastewater for developing decreased to 88% and wastewater for fixing decreased up to 87%. 5. Monthly average wastewater for developing per film increased to 3.77 times and wastewater for fixing increased to 3.85 times. Although the amount of film used and the amount of developing and fixing wastewater affected by the reduction of the developing and fixing solution became less on the whole by introduction of PACS, they did not decrease proportionally. Moreover the amount of the developing and fixing solution used and the amount of developing and fixing wastewater per a film increased. That means the expectation for an environmental improvement differs from the actual condition.

• Journal of Climate Change Research
• /
• v.1 no.3
• /
• pp.205-210
• /
• 2010

LED light has various advantages such as an energy saving effect of over 80% compared to existing lighting and environmentally friendly characteristics; however, there has been no affordable market for LED lighting because of its expensive price. This study discussed the validity of the expansion of distribution of LED lighting through an assessment of economic efficiency concerning LED lightening in order to analyze its efficiency in terms of energy savings and maintenance and repair, which will be generated as a result of the change from existing incandescent bulbs to LED lighting in the public sector. As to the target of analysis, the paper reviewed the validity of change to LED lighting as a result of the elimination of existing incandescent bulbs, by referring to 'the current incandescent bulb use and elimination performance' published by the Ministry of Knowledge Economy based on the "Elimination management system" executed by Korea Energy Management Corporation. The paper considered expenses for change, annual power savings amount and electric charges savings amount, repair and maintenance cost, $CO_2$ reduction volume, and the profit from the sale of CER (certified emission reduction). As a result of analyzing economic efficiency, when the discount rate during the change of existing incandescent bulb lighting to LED lighting is 3.26%, the profit was 8,648,400,000 won. Accordingly, NPV was analyzed to have a 'positive (+)' value, which means that this change is profitable.

• Journal of Energy Engineering
• /
• v.10 no.3
• /
• pp.177-182
• /
• 2001

This paper aims at evaluating HSDI diesel passenger cars introduction. The result of economic analysis after accounting for the life cycle cost per car shows a saving of 13,836 thousand won in fuel cost per diesel car assuming a life of 10 years and the annual travel distance of 20,000km. Assuming an average travel distance of 20,000km and a 10% increase in sales of diesel passenger car, the social benefit starts to accrue from the year 2002 and, in 2010, is estimated to be 154.1 billion won relative to the gasoline passenger car. The cumulative social benefit up to 2010 under the same assumptions is expected to reach 636.8 billion won.

• The Journal of Bigdata
• /
• v.5 no.2
• /
• pp.1-15
• /
• 2020

The duty-free industry before COVID-19 has continuously grown since 2000, along with the increase of demand in tourism industry. To cope with the increased demand, the duty free companies have kept the strategies which focused on the sales volume. Therefore, they have developed the ways to increase the volume and capacity, not the efficient operations. In the most of previous research, however, authors have proposed the better strategies for marketing and supporting policies. It is very hard to find the previous research which dealt with the operations like logistics and inventory management. Therefore, in this study, it has been predicted the future demand of frequently purchased items in airport duty free shops based on the estimated number of departing passengers by the linear regression, which concluded with the appropriate inventory level. In addition, it has been analyzed the expected effects by introducing the inventory management policy considering the cost and efficiency of operations. Based on the results of this study, it may be possible to reduce total cost and improve productivity by predicting the excessive inventory problems at duty-free shops and improving cycles of supplying items.

• Plant Journal
• /
• v.17 no.2
• /
• pp.48-53
• /
• 2021

In the case of a 900 MW combined cycle power plant, most of the load on the site is a rotating device and is operated at a low power factor, and the power factor decrease increases the reactive power, which causes the efficiency of the device to be consumed and unnecessary unnecessary power consumption. This study intends to present the results by installing and operating a reactive power compensation device that absorbs and removes reactive power, which is a solution to this problem, on a 6.9 kV on-board bus. As a result of application of this system, first, it was confirmed that the power factor of the rotating machine was improved to 0.22 and the load power in the house was reduced by 1.4%, and the thermal efficiency of the generator was increased by 0.1% and the power generation power by 810 kW. Next, it was confirmed that the cost of construction and operation can be reduced in the future due to economic feasibility, with a decrease of 200 million won/year in electricity loss compared to 1.5 billion won in investment, an increase of 1 billion won/year in sales, and a one-year capital recovery period.