• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.2
• /
• pp.158-164
• /
• 2002

This paper presents a proper parallel control method using a conventional control and a repetitive control for improving the output voltage waveform of uninterruptable power supply. Although first-order prediction control method shows a good characteristics to rectifier load, it is not sufficient to reduce steady state errors generated in nonlinear loads such as rectifier loads and phase controled loads. So we also employed a repetitive control method. A repetitive control method can eliminate steady state errors in the distorted output voltage caused by cyclic loads. The presented control scheme is verified through simulation and experiment. Experimental results Implemented on a single phase PWM inverter equipped with a LC output filter with 3 kVA, 60 Hz are shown.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.43-48
• /
• 2009

We constructed a simple wavelength readout system for a tunable fiber laser which was used for a fiber Bragg grating sensor array system. A quadrature sampling method was used to demodulate wavelength variations of the tunable laser which consisted of a SOA(semi-conductor optical amplifier) and a fiber-optic Fabry-Perot filter. Internal triggers, which have a 90 degree phase period, have been generated by using a double-pass Mach-Zehnder interferometer. From Lissajous plots with quadrature sampled data, a mean phase error of ${\sim}2.51$ mrad was obtained. From the wavelength readout experiments, an accurate and fast linear wavelength demodulation has been confirmed.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.399-402
• /
• 2001

본 논문에서는 항공 영상에서 직선 성분을 강건하게 추출하기 위한 새로운 영상 필터링 기법을 제안한다. 제안하는 기법은 지상 구조물의 추출에 유용한 직선 특징을 이루는 에지와 비직선 특징을 이루는 에지의 대비도를 증가시키기 위하여 비선형, 비등방 확산 기법 [2]을 영상에 적응적으로 적용한다. 이를 위하여 확산 매개변수를 제안하는 새로운 직선성 척도로 설정하고 영상의 각 점에서의 직선성 값에 따라 적응적으로 확산을 시킴으로써 확산 과정에서 직선 특징을 잘 보존하고 비직선 특징을 효과적으로 제거한다. 본 논문에서는 직선성 척도로서 에지 체인 위의 점들의 방향성 엔트로피를 제안하고 다양한 영상에 대한 실험을 통해서 엔트로피 척도가 영상에서의 직선 특징을 추출하는데 효율적임을 보인다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.1
• /
• pp.17-27
• /
• 2014

As the importance of Cooperative Engagement Capability and network-centric warfare has been dramatically increasing, it is necessary to develop distributed tracking systems. Under the development of distributed tracking systems, it requires tracking filters and data fusion theory for nonlinear systems. Therefore, in this paper, the problem of nonlinear track fusion, which is suitable for distributed networks, is formulated, four algorithms to solve the problem of nonlinear track fusion are introduced, and performance of introduced algorithms are analyzed. It is a main problem of nonlinear track fusion that cross-covarinaces among multiple platforms are unknown. Thus, in order to solve the problem, two techniques are introduced; a simplification technique and a approximation technique. The simplification technique that help to ignore cross-covariances includes two algorithms, i.e. the sample mean algorithm and the Millman formula algorithm, and the approximation technique to obtain approximated cross-covariances utilizes two approaches, by using analytical linearization and statistical linearization based on the sigma point approach. In simulations, BCS fusion is the most efficient scheme because it reduces RMSE by approximating cross-covariances with low complexity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.8
• /
• pp.54-62
• /
• 2006

Voltage unbalance will be generated by the load unbalance operation such as combination operation of single & three phase load and current unbalance will be more severe by the deteriorated voltage quality. Under the these unbalance conditions, all power electronic converters used in different types of electronic systems can increase harmonic disturbances by injecting harmonic currents directly into the feeder grid of three phase 4-wire. Harmonic current may cause torque to decrease. it may also overheat or become noisy and torque oscillation in the rotor can lead to mechanical resonance and vibration. This paper presents a scheme on the characteristics of induction motor under the combination of linear & non-linear loads at the three phase 4-wire power distribution system by the unbalance and harmonic components. It was able to confirm that the number of torque pulsation decreased and torque ripple values increased by the harmonics that reduction was difficult by five harmonics filters at additional driving time of single-phase non-linear load.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.2
• /
• pp.82-88
• /
• 2009

Power capacitor is generally installed to compensate for the low power factor of inductive load But it has been used as passive filter to reduce harmonics generated by the power conversion device. Passive filter is composed by the series connection of reactor and capacitor. Because passive filter has play an important role on the absorber of harmonics, it takes voltage and current stress, follows partially burned on flamed and degradation, finally it has not guaranteed normal life. In this paper, we analyzed the effect that passive filter installed at the source side of PWM inverter is received by harmonics absorption.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.280-285
• /
• 2015

We consider a linear transceiver design method for multi-user multiple-input multiple-output (MIMO) downlink channels where a base station (BS) equipped with a finitely large number of antennas. Although a matched-filter precoder is a capacity-achieving method in massive MIMO downlink systems, it cannot guarantee to achieve the multi-user MIMO capacity in a finitely large number of antennas due to inter-user interferences. In this paper, we propose a two-stage precoder design method that maximizes the sum-rate of cell-edge users when the BS equipped with a finitely large number of antennas. At the first stage, a matched-filter precoder is adopted to exploit both beamforming gain and the reduction of the dimension of effective channels. Then, we derive the second stage precoder that maximizes the sum-rate by minimizing the weighted mean square error (WMSE). From simulation and analysis, we verify the effectiveness of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8A
• /
• pp.1291-1297
• /
• 2001

본 논문에서는 DS-CDMA 환경의 다중 사용자 검출에서 문제시되는 다중 접속 간섭을 제거시켜주기 위해 사용되는 간섭 제거기에 대하여 소개한다. 기존의 간섭 제거 기술 중 병렬형 간섭 제거기는 장치적으로 복잡하고, 순차적 간섭 제거기는 지연 시간이 길다는 단점을 가지고 이다. 무엇보다도, 적응형 간섭 제거기는 수렴하기 위하여 많은 반복수가 필요하다. 우리는 이러한 간섭 제거기들의 성능을 개선시키기 위해서 CMA(Constant Modulus Algorithm)을 이용한 적응형 간섭 제거기에 간섭 제거 기법을 적용시킨 새로운 간섭 제거기를 제안한다. 제안된 간섭 제거기는 적응 필터 처리후 간섭 제거 기법을 적용시키기 때문에 동일한 BER(Bit Error Rate)을 얻고자 할 때 기존의 적응형 간섭 제거기에 비해 수렴을 위한 반복수를 줄여 준다. 그리고, 적응 필터를 사용함으로써 기존의 비선형 간섭 제거기에 비해 하드웨어적인 복잡도를 줄일 수 있는 효과가 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.57-64
• /
• 2005

In two-degree of freedom(TDOF) inertial sensors, two axes are mechanically correlated with each other. Fault source of one axis sensor may affect the other axis sensor, and therefore multiple fault detection and isolation(FDI) technique is required. Conventional FDI techniques using hardware redundancy need four TDOF inertial sensors for FDI. In this study, three TDOF inertial sensor redudancy case is considered, where conventional FDI technique can detect the fault, but cannot isolate the fault sensor. Hybrid FDI technique is proposed to solve this problem. Hybrid FDI technique utilizes the analytic redundancy by utilizing the unscented kalman filter as well as hardware redundancy for FDI. To verify the effectiveness of the proposed FDI technique, numerical simulations are performed using six degree of freedom nonlinear aircrft dynamics.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.285-294
• /
• 2004

Median Filters in the Signal Processing have been most widely used and have demonstrated the most strongest effects. This paper proposes the Adaptive Median Filters by using noise detection. The basic algorithm of the proposed filters is to determine whether noise or not by the each noise judgement standards, and then take the Median Filter if it satisfies the conditions as a result of judgement and returns to the original image(No Filters) if not. This paper presented Noise Detection by Local Variance and Local Central Variance for noise judgement, compared and analyzed the features and performance of existing [5]∼[10] Filters. Filter improved on the result of executing the existing filters at the same condition and showed the effects over that when it was judged with naked eyes. Accordingly, the Adaptive Median Filters by Local Variance and Local Central Variance was proven to have reinforced edge preservation ability and have the strong features for removing the Impulse Noise of the Median Filter.