• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.51-57
• /
• 2010

When estimating the calmness in a harbor, it is important that diffraction and reflection of irregular waves should be exactly calculated. The basic equation of the numerical model in this study was used Mild-slope equation, which has the advantage of which non-linearity with great influence for the wave behavior can be considered, and a triangular mesh was generated by using finite element method. So as to verify the nonlinear effects, the results of the numerical model developed in this study are compared with the experimental and numerical results by other researchers. As a result, it is shown that the results in case of considering nonlinear wave are more exact for wave analysis than in case of not considering nonlinear wave. In order to apply this model, wave height distributions in Jumunjin fishery port installed a seawater-exchange breakwater are computed. From the results of this numerical analysis, when abnormal waves are intruded through the seawater-exchange breakwater, the results of the wave height distributions in the harbor are highly presented. Therefore, in order to get wave height low in the harbor, it is considered that the facility with the ability to protect the inflow of abnormal waves is needed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.265-272
• /
• 2007

This proposed gamma (${\gamma}$) correction system is developed to reduce the difference between non-linear gamma curve produced by a typical formula and result produced by the proposed algorithm. In order to reduce the difference, the proposed system is using the Least Squares Polynomial which is calculating the best fitting polynomial through a set of points which is sampled. Each system is consisting of continuous several kinds of equations and having their own overlap sections to get more precise. Based on the algorithm verified by MATLAB, the proposed systems are implemented by using Verilog-HDL. This paper will compare the previous algorithm of gamma system such as Existing system with Seed Table with the latest that such as Proposed system. The former and the latter system have 1, 2 clock latency; each 1 result per clock. Because each of the error range (LSB) is $1{\sim}+1,\;0{\sim}+36$, we can how that Proposed system is improved. Under the condition of SAMSUNG STD90 0.35 worst case, each gate count is 2,063, 2,564 gates and each maximum data arrival time is 29.05[ns], 17.52[ns], respectively.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.2
• /
• pp.10-16
• /
• 2012

Currently, the majority of systems which are non-linear are in need of the correct system equations for controlling and monitoring. Therefore, the correct estimation of parameters is crucial. Generally, parameters are changed due to system deterioration or sudden environmental alterations. Given the limitations of system monitoring unstable controls can arise. In the following paper, the parameter estimation method is proposed using software filters to combat these system instabilities. For dynamic instances, a powerful particle filter is used to control the nonlinear and noisy environments in which they take place. Using a setup simulation comprised of a slider and pendulum, the state variable of noise is obtained. After collecting the data, the proposed algorithm is used to estimate both the state variable and its parameters. Finally, these results are checked with correct parameter estimations to evaluate and verify the algorithms performance.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.1
• /
• pp.49-59
• /
• 2009

In this paper a watermarking algorithm is proposed to optimize the capacity of the digital watermark insertion in an experimental threshold using the characteristics of human visual system(HVS), adaptive scale factors, and weight functions based on discrete wavelet transform. After the original image is decomposed by a 3-level discrete wavelet transform, the watermarks for capacity optimization are inserted into all subbands except the baseband, by applying the important coefficients from the experimental threshold in the wavelet region. The adaptive scale factors and weight functions based on HVS are considered for the capacity optimization of the digital watermark insertion in order to enhance the robustness and invisibility. The watermarks are consisted of gaussian random sequences and detected by correlation. The experimental results showed that this algorithm can preserve a fine image quality against various attacks such as the JPEG lossy compression, noise addition, cropping, blurring, sharpening, linear and non-linear filtering, etc.

• The KIPS Transactions:PartA
• /
• v.14A no.1 s.105
• /
• pp.73-76
• /
• 2007

The determination of the conformal maps from the unit disk onto a Jordan region has been completed by solving the Theodorsen equation which is an nonlinear equation for the boundary correspondence function. Wegmann's method has been well known for the efficient mothed among the many suggestions for the Theodorsen equation. We proposed an improved method for convergence by applying a low-frequency pass filter to the Wegmann's method and theoretically proved convergence of improved iteration[1, 2]. And we proposed an effective method which makes it possible to estimate an error even if the real value is nut acquired[3]. In this paper, we propose an automatic algorithm for numerical conformal mapping bared on this error analysis in our early study. By this algorithm numerical conformal mapping is determined automatically according to the given domain of problem and the required accuracy. The discrete numbers and parameters of the low-frequency filter were acquired only by experience. This algorithm, however, is able to determine the discrete numbers and parameters of the low-frequency filter automatically in accordance with the given region This results from analyzing the function, which may decide the shape of the given domain under the assumption that the degree of the problem depends of the transformation of a given domain, as seen in the Fourier Transform. This proposed algorithm is also ploved by numerical experience.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.144-148
• /
• 2006

본 연구의 목적은 기존 수위-유량곡선식 개발과정에 내재되어 있던 목적함수 문제와 곡선식 개발과 정에서 대두된 발산과 처리 불능문제를 해결하기 위해서 새로운 형태의 관계식$(Q=p(h-e)^{\beta}-{\gamma})$과 비선형 매개변수 추정방법을 이을 제안하고 이러한 신개념의 수위-유량곡선식 산정모형을 개발하는데 있다. 기존 수위-유량곡선식은 기존수위-유량자료를 log변환하여 산정된 목적함수는 저수위에 비하여 고수위 부분에 잘못된 유량 값을 추정하는 문제를 갖고 있다. 기존의 발산 문제는 영유량 수위 매개변수 e를 찾고 추정된 식의 목적함수을 수렴하는 동안 매개변수 ${\beta}$가 비정상적으로 커지는 것이다. 이상의 두 가지 문제는 제어변수 ${\gamma}$를 도입하고 목적함수, $min{\sum}w(i)(Q-\hat{Q})^2$를 도입함으로서 개선 할 수 있게 되었다. 본 연구에서는 물리적 분석과 민감도 분석을 통하여 수위-유량곡선식에서 매개변수 ${\gamma}$의 영향이 e의 영향과 같음을 보였다. 또한 개발된 WinCARD 시스템은 기존의 목적함수에 의한 추정오차와 새롭게 제안된 목적함수의 개선사항을 상호 비교할 수 있게 하였다. 본 개발프로그램은 기존 수위-유량곡선식의 적합도를 평가하고, 하천유량 산정을 위한 신개념의 수위-유량곡선식을 개발하는데 활용될 수 있다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.20 no.1
• /
• pp.19-23
• /
• 1982

귀금속의 가격 앙등은 치과보철치료에 있어서 비귀금속합금의 이용을 촉진 시키고 있다. 가공의치 제작에 비귀금속합금을 이용할 경우에는 납착상태에 대한 신빙성 문제로 인하여 one-piece cast법이 널리 사용되고 있으나 이에 의하여 제작된 가공의치의 적합도에 관하여는 논의가 분분하다. 고로 저자는 one-piece cast법에 의한 비귀금속 가공의치에 있어서 경화수축에 따른 거리변화를 계측현미경을 이용하여 연구한 결과 다음과 같은 결론을 얻었다. 1. 4개 치아를 포함하는 가공의치 제작에 있어서 Hi-Temp 매몰재는 비귀금속합금(Lite-Cast B)의 수축을 보상하고도 남음이 있다. 2. Hi-Temp에 사용되는 액(液)을 증류수로 희석할 경우 그 농도 조절에 의하여 Hi-Temp 매몰재의 팽창을 크게 변화시킬 수 있다. 3. one-piece cast법에 의한 가공의치 제작의 문제점은 두 지대치의 서로 바라보고 있는 인접면간의 거리는 증가됨이 없이 외측 인접면간의 거리만 다소 증가되어야 한다는 것이다. 4. 비귀금속합금을 이용하여 수직적인 큰 변형없이 4개 치아가 포함되는 가공의치를 제작할 수 있다. 5. 수개 치아를 포함하는 가공의치의 주조 정확도를 계측할 수 있는 새로운 방법을 창안하였다.

• Journal of Biomedical Engineering Research
• /
• v.20 no.5
• /
• pp.573-579
• /
• 1999

본 논문은 2채널 센서를 이용한 펄스 옥시메터의 산소포화도 계산 모델의 설계 및 분석에 관한 것이었다. 또한 Beer Lambert 법칙에 의거하여 기존 알고리즘 및 새로운 알고리즘들을 이론적으로 분석하였다. 제안된 알고리즘은 손가락을 투과한 2개의 채널에서 나온 광신호를 각각 직류성분 Adc 와 맥동성문 Aasin wt. 잡음성분 Ahnoise , ALnoise 등으로 모델링한다. 모델링 되어진 광신호를 맥동성분이 적분비를 사용하여 고주파 동잡음인 AHnoise 를 제거한 후 각각 산소포화도 계산을 위한 상관계수 그래프를 구한다. 또한 2개의 채널에서 적분비를 사용하여 구해진 상관계수 그래프를 사용하여 산소농도를 추출하는 방법에 관하여 기술하였다. 맥동성분비와 관혈적인 측정에 의한 혈중 산소포화도와의 상관관계 그래프의 선형성을 확보하기 위하여 펄스 옥시메터 시뮬레이터 오차범위를 고려해 75~100%상이의 산소포화도를 중점적으로 관측하였고, 4주기로 면적계산주기를 결정하여 실험하였다. 본 연구에서 제안된 알고리즘의 성능평가는 맥동성분의 적분비를 이용한 방법과 비교하였다. 비교결과는 4주기의 면적계산 주기를 가졌을 때 기존의 방식보다 평균오차가 0.7%정도 향상되었으며, 회귀적선의 신뢰도를 보여주는 결정계수 ${\gamma}$$^2$도 0.995로 기존의 방식에서 나온 0.979보다 더 좋은 결과를 얻을 수 있었다. 따라서 2채널을 이용한 방법이 A Lnoise 제거와 성능면에서 우수하다는 결론을 얻을 수 있었다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.5
• /
• pp.75-83
• /
• 2003

The ultimate goal of this research is to improve highway system performance in earthquakes by evaluating the effectiveness of retrofitting bridges with column jacketing. The objective of the study is to determine if steel jacketing increases the ductility capacity of bridge columns and hence improves the fragility characteristics of the bridge. Analytical fragility curves are used to adjust the empirical fragility curves obtained for the unretrofitted bridges using seismic damage data collected following past earthquakes. The adjustment was carried out by increasing the median values of the empirical curves through comparison with the median values of the corresponding fragility curves obtained analytically, both before and after being retrofit.

• Journal of KIISE:Software and Applications
• /
• v.31 no.6
• /
• pp.784-791
• /
• 2004

In this study, we deal with face recognition using fuzzy-based Fisherface method. The well-known Fisherface method is more insensitive to large variation in light direction, face pose, and facial expression than Principal Component Analysis method. Usually, the various methods of face recognition including Fisherface method give equal importance in determining the face to be recognized, regardless of typicalness. The main point here is that the proposed method assigns a feature vector transformed by PCA to fuzzy membership rather than assigning the vector to particular class. In this method, fuzzy membership degrees are obtained from FKNN(Fuzzy K-Nearest Neighbor) initialization. Experimental results show better recognition performance than other methods for ORL and Yale face databases.