• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.117-119
• /
• 2005

Voltage Flicker는 다른 전력품질 요소들과는 달리, 전압의 흔들림이 사람의 눈과 뇌에 미치는 영향을 고려한 지수이다. IEC 61000-4-15에서는 이러한 플리커의 평가 알고리즘을 제시하고 있으며, 제한치를 $Pst{\leq}1$, $Plt{\leq}0.65$로 정의하고 있다. 이 제한치는 다양한 비선형 부하들의 경우에도 만족시켜야 하며, 계통의 설계 시 미리 고려를 할 필요성이 있다. 본 논문에서는 Fortran을 이용하여 IEC61000-4-15의 플리커미터 알고리즘을 구현하고 이를 PSCAD/EMTDC의 Module로 적용시켜, 시험 계통이 플리커 제한치를 만족시키는가에 대한 테스트가 가능하도록 하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1288-1293
• /
• 2009

This paper discusses about modeling method to simulate a nonlinear behavior like sliding or rocking of two stacked body system under earthquake condition. A double body system design can be an option to reduce seismic response of a component in comparison to a single body system for free standing structures. Therefore, according to the priority of components, the structure is to be designed by proper ratio of partition in their height for improvement of seismic capability and structural integrity. Nonlinear modeling and analysis using simple rigid body and dynamic system has been performed to check the trend in such cases. As a result, one of the two bodies can be chosen to reduce the seismic response from energy absorption of the other one by appropriate application of friction ratios not only in slip-slip condition but in slip-rock condition.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.542-543
• /
• 2010

본 논문에서는 전기에너지 절약과 계통의 전력품질을 향상시킬 수 있는 다기능 전기에너지 절전 장치를 제안한다. 제안된 시스템은 UPQC(Unified Power Quality Conditioner)를 응용한 형태로 전압제어형 전압원 인버터와 전류제어형 전압원 인버터로 구성된다. 계통과 병렬로 연결된 전류제어형 전압원 인버터는 부하에서 발생하는 무효전력성분을 보상하고, 부하와 직렬로 연결되는 전압제어형 전압원 인버터는 부하전압의 크기를 조정하여 전력소비를 절감시킨다. 본 논문에서는 제안된 시스템의 유용성을 확인하기 위해 비선형 부하조건에서 시뮬레이션 및 실험을 수행하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.4 no.1
• /
• pp.64-80
• /
• 1994

본 연구에서는 장기전원구성의 수립에 있어서 가정한 시나리오에서 최적해를 찾는 기존의 방법을 탈피하여 건설단가나 연료단가의 변동과 같은 경제성의 변동 및 최대부하의 예측의 불확실성에 대한 외부충격등에 견딜 수 있는 유연성을 정량적으로 고려할 수 있는 새로운 방법을 제안한다.그 수법으로 Fuzzy 동적계획법을 이용하여 각 대표년도별로 최적전원구성안을 결정하므로써 년도별 전원 구성의 추이를 쉽게 알 수 있고 비선형 멤버쉽함수도 용이하게 고려할 수 있도록 하였다. 여기서는 경제성, 신뢰성, 부하불확실성 및 유연성에 대한 멤버쉽 함수치를 각상태별로 계산하고 Bellman-Zadeh의 최대화 결전과정에 따라 처리하므로서 그 안을 결정하도록 하였다. 본 수법을 우리나라 KEPCO 계통에 적용하여 그 유용성을 검토하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.2
• /
• pp.151-157
• /
• 2013

This paper proposes an online adaptive fuzzy controller for a wind energy conversion system (WECS) that is intrinsically highly nonlinear plant. In real application, to obtain exact system parameters such as power coefficient, many measuring instruments and off-line implementations are required, which is very difficult to perform. This shortcoming can be avoided by introducing fuzzy system in the controller design in this paper. The proposed adaptive fuzzy control scheme using self-structuring algorithm requires no system parameters to meet control objectives. Even the structure of the fuzzy system is automatically grows on-line, which distinguishes our proposed algorithm over the previously proposed fuzzy control schemes. Combining derivative estimator for wind velocity, the whole closed-loop system is shown to be stable in the sense of Lyapunov.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.467-468
• /
• 2015

능동형필터는 주로 비선형 부하로 부터 발생되는 정수배의 고조파를 보상하는데 응용되어 왔다. 본 논문에서는 국가핵융합연구소(NFRI)의 KSTAR 주장치의 전원공급장치인 PF MPS가 가동되면서 특이한 저차수 대역의 비정수 고조파가 발생되는데 이는 MG(motor generator)와 RPC (Reactive Power Compensator)간의 병렬공진 확대현상으로 나타나 고조파 전류의 증가, 전압왜형 상승 등 안정적인 전력계통 운영에 영향을 주고 있다. 따라서 이의 원인이 되는 특이성의 비정수 고조파를 저감시키기 위한 제어 알고리즘 개발과 모의시험에 관한 연구내용을 다루고자한다. 지금까지 개발된 알고리즘은 주로 정수배 고조파만을 대상으로 한 FFT의 일괄보상, 혹은 개별차수 보상방식이었으나 여기서는 DQ 변환 알고리즘을 채용하여 정수배 고조파는 물론 0.5차 단위의 비정수 고조파까지 제어하는 기술을 다루었다.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.833-844
• /
• 1995

In self-tuning predictive control algorithm for steam generator is presented. The control algorithm is derived by suitably modifying the generalized predictive control algorithm. The main feature of the unposed method relies on considering the measurable disturbance and a simple adaptive scheme for obtaining the controller gain when the parameters of the plant are unknown. This feature makes the proposed approach particularly appealing for water level control of steam generator when measurable disturbance is used. In order to evaluate the performance of the proposed algorithm, computer simulations are done for an PWR steam generator model. Simulation result show satisfactory performances against load variations and steam flow rate estimation errors. It can be also observed that the proposed algorithm exhibit better responses than a conventional PI controller.

• Nuclear Engineering and Technology
• /
• v.27 no.3
• /
• pp.336-343
• /
• 1995

The Self Tuning Regulator(STR) method which is an approach of adaptive control theory, is ap-plied to design the fully automatic power controller of the nonlinear reactor model. The adaptive control represent a proper approach to design the suboptimal controller for nonlinear, time-varying stochastic systems. The control system is based on a third­order linear model with unknown, time-varying parameters. The updating of the parameter estimates is achieved by the recursive extended least square method with a variable forgetting factor. Based on the estimated parameters, the output (average coolant temperature) is predicted one-step ahead. And then, a weighted one-step ahead controller is designed so that the difference between the output and the desired output is minimized and the variation of the control rod position is small. Also, an integral action is added in order to remove the steady­state error. A nonlinear M plant model was used to simulate the proposed controller of reactor power which covers a wide operating range. From the simulation result, the performances of this controller for ramp input (increase or decrease) are proved to be successful. However, for step input this controller leaves something to be desired.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.4
• /
• pp.359-365
• /
• 2002

Three-phase four-wire electrical distribution systems have been widely employed in manufacturing plants, commercial and residential buildings. Due to the nonlinear loads, the neutral conductor carries excessive harmonic currents resulting in wiring failure of the neutral conductor, overloading of the distribution transformer and a voltage drop between the neutral and the ground. This paper proposes a reduced rating active power filter to suppress neutral current harmonics in three-phase four-wire electrical distribution systems. The proposed system is simple in control and the VA rating of the inverter could be significantly reduced since only the fundamental current due to unbalanced loading flows through the inverter switch. The experimental results on a prototype validate the proposed control approach.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.527-532
• /
• 2012

Recently, in power system, even though the needs of protective IED(Intelligent Electronic Device) is highly increased, there are some problems in the field when use the IED. When the IED is in the fluctuated overload condition, because of the existing algorithm calculate the trip time only with the measured current of just previous measuring stage, the calculated trip time is not a proper value for the overload protection at this kind of condition, and when the load current fluctuate between overload and normal condition, because of the instantaneous reset characteristic of existing algorithm the IED dose not trip. And the non linear loads using power electronic elements seem to be increased. These non linear loads require a counterplan about various harmonics incoming to electric power systems. So we will give solutions about these problems.