• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.78-83
• /
• 2009

In this study, computer applied engineering (CAE) techniques are fully used to conduct structural and dynamic analyses of a whole huge wind turbine system including composite blades, tower and nacelle. For this study, computational fluid dynamics (CFD) is used to predict aerodynamic loads of the rotating wind-turbine blade model. Multi-body dynamic structural analyses are conducted based on the non-linear finite element method (FEM) by using super-element method for composite laminates blade. Three-dimensional finite element model of a wind turbine system is constructed including power train(main shaft, gear box, coupling, generator), bedplate and tower. The results for multi-body dynamic simulations on the wind turbine's critical operating conditions are presented in detail.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.5
• /
• pp.781-788
• /
• 1987

The state variables estimated in an observer were useed in feedback control of a hydraulic servosystem to increase the system stability and to enhance the system performance. The nonlinear hydraulic servosystem with the inherent nonlinearities due to the square root function of flow equation, the Coulomb friction and so on, was modelled as a fourth order linear hydraulic servosystem. Also, a second order linear system was derived for the observer-controller design. For these models, a fourth order linear observer and a second order linear observer were constructed respectively to evaluate the performance of the observer-based hydraulic servosystem. The results obtained from series of simulation showed that the system which had shown oscillatory phenomenon under proportional control became stable with the same maximum acceleration and velocity that it had started under proportional control.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.631-638
• /
• 2006

This paper considers the nonlinear direct spectrum method to estimate seismic performance of mixed building structures without iterative computations, given dynamic property $T_1$ from stiffness skeleton curve and nonlinear pseudo acceleration $A_{1y}$ and/or ductility ratio $\mu$ from response spectrum. Nonlinear response history analysis has been performed and analysed with various earthquakes for evaluation of correctness and confidence of nonlinear direct spectrum method.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.311-319
• /
• 2001

Recently, the number of seismically isolated bridges increased suddenly since the occurrence of strong earthquakes. However, because isolator lies between pier and girder, the response of the superstructure of seismically isolated bridge may be magnified and induce risk of unseating girder Consequently, the response of girder constitutes a crucial factor in designing bridge. In the case of frictional bearing, the inherent nonlinearity makes the use of former linear response spectrum unable to estimate the maximum response of the bearing, and nonlinear tlme history analysis shall be applied. In this paper, nonlinear response spectrum considering frictional element is established, and simple analysis method using such nonlinear spectrum is proposed to estimate the maximum response of the superstructure.

• Tribology and Lubricants
• /
• v.15 no.1
• /
• pp.68-76
• /
• 1999

This paper presents the nonlinear characteristics of the oil lubricated hydrodynamic journal bearing. The traditional approach is to characterize the behavior and performance of fluid film hydrodynamic journal bearings by means of linearized bearing analysis. The objective of this paper is to examine the nonlinear characteristics of the journal bearing when an external sinusoidal shock is given to the system. The oil film force is obtained by solving the finite width Reynolds equation at each time step by the solution of the column method. Frequency response function and journal orbit obtained from both linear and nonlinear bearing simulations are compared with each other.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.1
• /
• pp.79-92
• /
• 1992

This is analyzed using the finite element method which is appling excellent isoparametric curve element in the aspect of large usages of dynamic responses in which is regarding geometric and material nonlinear of a large scale shell structure of an airplane, a submarine, a ship, and an ocean structure. The solution of dynamic equations is got by direct integration method using time-stepping procedure and regarding Central Difference Method of the both solutions. But because formal matrix factorization is not necessary in each time step and it does not take less time to compute relatively, this method must be regarded very few time steps on the condition. Axisymmatric shell problems are inspected using 8 node Isoparametric element in this paper. Partial axisymmatric spherical shell is used as a model to analyze axisymmatric nonlinear dynamic behavior regarding. Total Lagrangian formulation in geometric nonlinear behavior and elastio-viscoplastic in material nonlinear behavior.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1755-1756
• /
• 2008

본 연구는 이동하면서 트롤리선 가설하는 작업로봇에서 가선 트롤리선에 대한 장력제어 방법이 제안되었다. 비선형 와이어 모델, AC 전동기를 이용한 장력발생 시스템 및 와이어 장력 방정식 에 기초하여 장력제어 시스템이 로드셀에 의한 장력 검출로 설계되고 실행되었다. 장력응답은 실험에서 만족하게 장력의 조절하는 것으로 보인다. 제안한 장력제어 시스템은 시뮬레이션과 실험을 통하여 그 결과가 유효함을 증명하였다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1765-1766
• /
• 2008

본 논문에서는, 전동기를 이용하는 위치제어 시스템을 이용하여, 이너루프 제어기 유무에 따라 시간 응답 특성 개선 효과에 대하여 실험을 통해 검증하고자 한다. 실험 플랜트로서, 전동기의 속도에 따라 진자의 위치를 제어하는 다중 안정도를 가지고 비선형 시스템인 아라고 진자 시스템을 이용한다. 이 시스템은 속도 정보를 알 수 있는 측정 장치가 없는데, 칼만필터로 전동기의 속도를 추정하고 속도 제어기를 설계하도록 한다. 또한, 선형 시스템을 고려하기 위하여 안정영역 동작점인 진자의 각도가 지면으로 부터 45$^{\circ}$인 선형화 모델을 이용한다.

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.2 s.4
• /
• pp.45-49
• /
• 2002

Current seismic design codes for building structures are based on the methods which can provide enough capacity to satisfy objected performance level and exactly evaluate the seismic performance of buildings. This paper is to suggest the method of inference of inelastic earthquake response obtained from MDOF system by equivalent SDOF system, and to prove the validity. The analysis results form simple model shows a good application possibility.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.31-41
• /
• 1997

Equations of motion for a 7 DOF full car model is developed in detail and used for the design of LQR based active suspension system. The frequency response to road disturbance input and the motion of a car passing unequal bumps were used to analyzed the dynamic characteristics of the 7 DOF full car with passive or active suspensions. The resulting linear equations of motion may be usefull in designing other types of active suspension.