• Annual Conference on Human and Language Technology
• /
• 2000.10d
• /
• pp.133-137
• /
• 2000

구문태그가 부착되지 않은 코퍼스를 사용하여 문법규칙의 확률을 훈련하는 비통제 학습(unsupervised learning) 방법의 대표적인 것이 CNF(Chomsky Normal Form)의 CFG(Context Free Grammar)를 입력으로 하는 inside-outside 알고리즘이다. 본 연구에서는 의존문법을 CNF로 변환하는 기법에 대해 논하고 의존문법을 위해 변형된 inside-outside 알고리즘을 논한다. 또한 이 알고리즘을 사용하여 실제 훈련한 결과를 보이고, 의존규칙과 구문구조 확률을 같이 사용하는 hybrid방식 구문분석기에 적용한 결과를 보인다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2048-2050
• /
• 2001

기존의 생산관리 현황반, 각종 산업용 판넬의 Faul Indicator, 각종 기계의 상태표시, 엘리베이터 정보출력장치, 주차타워 안내표시, 버스 행선지 안내표시, 병원, 은행 등 각종 광고용에서 사용되는 정보표시장치를 휘도와 안정성이 우수한 40mm 3 Color LED Dot Matrix Module을 이용한 Message 표시장치로서, 각종 Panel 및 기계 장치에 부착되거나 단독 설치되어 Parallel 또는 Serial Port로 입력을 받아 그 입력에 해당되는 Message를 출력 하며 User에 의해 제작되는 Graphic과 Text 형태가 있으며 외부입력에 의해 선택되는 Text Message와 출력 형태는 User에 의해 제작되는 Program에 의해 출력되는 방식으로 구현하여 영문, 숫자는 물론 한글 및 한자 표현도 가능 하도록 하여, 문자의 크기가 5${\times}$7 LED Dot Matrix에 비해 상대적으로 크고 미려하여 현장에서 상황의 인지도를 높이고 ASC-II 및 KS-5601의 Hex Code 입력방식보다 일반사용자가 Programming 하기 쉬우며 Message를 Graphic Symbol형태 및 문자로 작성하여 Message출력 형태를 선택할 수 있는 Mode Programming방식을 적용해 사용자의 용이이성이 배가 되도륵 하여 비교 검토한 결과 사용에 있어 편리성을 입증할 수 있었다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.79-84
• /
• 2012

This study consist of two parts. One is development of a self-propelling vinyl remover which was already reported at the previous paper. This is the second part of the study. For the study, an attached vinyl remover was developed. It was consisted of connecting tractor to bucket, removing bucket from tractor, and the process was the tractor's assistance hydraulics. In the case of an attached vinyl remover, the vinyl was twisted 0.5times per 30~85cm length. The bobbin's diameter was 190mm and it's stable travelling speed was 1m/s. The revolution of the remover wheel was 90rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10 a area, the average working speed was 1m/s and the turning time was 20seconds. Therefore, the working performance was 24.5min/10a. The efficiency of used vinyl remover was 97% and working conditions were good.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.5
• /
• pp.79-86
• /
• 2010

This study was performed to evaluate the flexural behavior of Hybrid fiber sheet (HFC) and Hybrid fiber bar (HFB) strengthened reinforced concrete (RC) beams. According to test results, Hybrid fiber reinforcement strengthened RC beams showed approximately 60 to 200% higher reinforcing effects than that of un-reinforced specimens. In addition, the reinforced beams showed the ideal failure pattern, which is failed presenting the ductile behavior after yielding of the reinforcing bar. More specifically, in the case of HFB reinforced RC beams, the difference with puttying method was not apparent since HFB beams reinforced using the injection of epoxy and bonding of putty showed the similar failure patterns.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.46-46
• /
• 1999

터보분자펌프(turbomolecular pump, TMP)는 각종 연구장비, 반도체 제조장치, 가속기, 핵융합 실험 장치 등 여러 분야에서 가장 널리 쓰이는 고진공 펌프로서 자리잡고 있다. 이런 TMP의 광범위한 사용에도 불구하고 성능평가에 관한 통일된 규격이 마련되어 있지 않다. 국제 규격협회(ISO)의 터보분자펌프 성능평가방법 시안을 토대로 제정중인 KS 규격은 아직 실험적인 근거를 자체적으로 가지고 있지 못하므로 앞으로 각 항목들에 대한 많은 실험이 수행되어야 한다. TMP의 성능을 나타내 주는 항목들 중 배기속도(pumping speed)와 압축비(compression ratio)는 가장 중요한 것들로서 다른 고진공 펌프 및 TMP 상호간의 성능을 비교할 수 있는 기본 항목이라 할 수 있다. 본 실험에서는 종래의 단순 TMP와 큰 기체유량에서도 안정된 배기속도를 유지하는 복합터보분자펌프(compound molecular pump, CMP)의 배기속도와 압축비 및 임계배압(critical backing pressure)을 KS 규격안대로 시험 평가하여 안의 평가방법과 기준의 타당성을 검토하고, 두 가지 다른 방식의 펌프에 적용할 수 있는지를 검토하였다. TMP 및 CMP 흡기구에 표준용기를 부착하고 수소 및 질소 기체를 사용하여 흡기구 압력을 변화시키면서 배기속도 및 압축비를 측정하고 배기구 압력을 변호시키면서 최대압축비 및 임계배압을 측정하였다. 흡기구의 압력측정에는 인출형 전리진공계(EG)를 사용하였고, 배기구의 압력측정은 전기용량의 격막진공계(CDG)와 피라니 진공계로 측정하였다. 진공계는 모두 회전식 점성진공계(SRG)로 교정한 후 사용하였다.

• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.43-54
• /
• 2008

In this paper, we implement an automatic entity information management system for smart refrigerator using RFID technology in which objects containing electronic tags are automatically identified using radio wave. Unlike current "smart" refrigerators, the system presented in this paper implements smart tag information acquisition mechanism and real-time information management system to provide various information on entities in refrigerators to local and remote users. As the first step, this paper analyzes the requirements for smart refrigerator system based on the RFID and suggests design considerations. Based on the analysis, we propose and implement an efficient tag location tracking method based on antenna transfer method and an intelligent tag information management system based on embedded database and web server. We also provide a wide range of experimental results on the number of tags identified at a time and the tag recognition ratio according to the RFID antenna transfer speed and the angle between tag reader and tags.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6A
• /
• pp.395-404
• /
• 2012

In general, WBAN environment which use wearable devices on the human body show the different characteristics from other personal area networks. It is usually composed of sensors contacting the body and user terminal collecting the data from the sensors. The sensors are under the significant constraint of the energy resources, but the user terminal is different because it can be recharged and relatively have large energy resources. Under this characteristics, we design a new MAC protocol considering this requirements. The proposed MAC protocol can increase the energy efficiency of sensors and loads the unavoidable energy consumption to the user terminal for high energy efficiency of sensors. Additionally, the proposed MAC protocol provides the low delivery delay of the emergency information for the differentiated QoS because the emergency data requires more rapid transmission than the periodic sensed data. For this requirement, we employ the IFS (Inter Frame Space). For the efficient and objective evaluation of the proposed MAC protocol, IEEE 802.15.6 MAC is used to compare with it and we show that the advantage of the proposed MAC meet our expectation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.2
• /
• pp.58-65
• /
• 2021

As increasing social needs of pavement maintenance, pattern frame method has been constructed in Korea. The pattern frame not only increases the skid resistance of pavements but also improve the scenery. However, construction of the pattern frame currently relies on imported materials. In this paper, we localize the materials used in pattern frame and conduct performance verification on them. The important performance indicators are the adhesion strength of undercoating materials and the skid resistance of finished pattern frames. The adhesion strength was targeted at 1.4MPa, and the localization alternative material met the target performance with 2.35MPa, the skid resistance performance was targeted at 40BPN, and the localization alternative material met the target performance with 75BPN. In the case of localized materials, approximately 40% cost reduction (per 1m²)compared to imported materials was confirmed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.4
• /
• pp.321-327
• /
• 2020

Purpose: The purpose of this study was to measure and compare the strain value exerted on the cervical area using different screw tightening protocols in implant-supported, screw-retained 3-unit prostheses. Materials and methods: Strain gauges were attached to four implants: two external and two internal. Thereafter, two study model were designed each type using acrylic resin. CAD-CAM was used to design hex and nonhex abutments for each group (EH, ENH, IH, and INH group) and Screw-cement-retained prostheses were also designed using a nonprecious base metal. Abutment was fixed with 10 Ncm torque, and the prosthesis was cemented. Screws were fixed with 30 Ncm torque using different three protocols. After 5 min, the strain gauge level was measured, and group analysis was performed (α=.05). Results: External group showed significantly lower strain values than internal group and the EH group showed significantly lower strain values than the ENH group (P<.05). There was no difference in strain value based on the types of screw tightening protocols in same group (P>.05). The IH group exhibited significantly higher strain values than the INH group and the IH group showed a significant difference in strain values based on the types of screw tightening protocols used (P<.05). Conclusion: There was no significant effect on the external type in the implant-supported, screw-retained prostheses. However, strain values were high in the internal type, and the types of screw tightening protocol significantly affected these implants.

• Korean Journal of Cognitive Science
• /
• v.23 no.2
• /
• pp.249-267
• /
• 2012

Individual differences in working memory predict qualitative differences in language processing. High span comprehenders are better able to integrate probabilistic information such as plausibility and animacy, the use of which requires the computation of real world knowledge in syntactic parsing (e.g.,[1]). However, it is unclear whether similar individual differences exist in the use of informative prosodic cues. This study examines whether working memory modulates the use of prosodic boundary information in attachment ambiguity resolution. Prosodic boundaries were manipulated in globally ambiguous relative clause sentences. The results show that high span listeners are more likely to be sensitive to the distinction between different types of prosodic boundaries than low span listeners. The findings suggest that like high-level constraints, the use of low-level prosodic information is resource demanding.