• Journal of Korean Society of Steel Construction
• /
• v.8 no.4 s.29
• /
• pp.31-42
• /
• 1996

본 연구에서는 박벽 구조물의 기하학적 비선형 해석을 수행하기 위하여 개선된 하중 및 변위 증분의 조합법이 제시되었다. 제안된 알고리즘은 기존의 하중 및 변 변위 증분의 조합법 이 고정된 증분량을 갖는 점을 개선하여, 수렴정도에 따라 증분량을 변화시킴으로써, 여러개의 임계점을 갖는 비선형 거동을 보다 효율적으로 추적하도록 하였다. 또한 하중 및 변위 증분법을 전환점을 첫 단계의 기울기에 비례한 값으로 대체함으로써 사용자의 편리를 도모하였다. 트러스, 공간 뼈대, 아치, 쉘 구조물 등의 기하학적 비선형 해석 예제를 통하여, 본 연구에서 제시한 개선된 하중 및 변위 증분의 조합법의 적용성을 입증하였다.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.2
• /
• pp.140-147
• /
• 1998

Since a structure carries out its given functions and purposes while it is always resisting against the external load, the capacity of the resistance in the structure within the range that will not collapse the structure itself becomes the important factor in the design of the structures. Therefore, many suggestions were proposed and noted for determining method of the collapse load. Some of the methods from the suggestions have been commonly used due to the considerations on their distinctive advantages such as the compactness of the conceptions and the convenience in the computation. However, in case when the variation becomes huge in the materials and load, the results would carry(have or contain) many uncertain elements. On the other hand, load incremental method which regards the characteristics of the probability must be more attainable method even though it might complicate the calculation. This study intends to develop a finite element model that uses the probabilistic load incremental method to estimate the collapse load, and also to compare the result of the analysis with the linear load incremental method and Turkstra's Rule.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.54-60
• /
• 2017

In this study, we investigated the effect of $TiCl_4$ injection time on the Kroll reaction at a given weight ratio of $TiCl_4$ and Mg. The reduction reaction was investigated by measuring the temperature change according to $TiCl_4$ injection time and observing the cross section and appearance of the Ti sponge after the reaction. The temperature increment due to Kroll reaction heat generation was found to be linearly proportional to the $TiCl_4$ feed rate. In the graph of $TiCl_4$ injection time and reduction tank temperature, initial temperature peaks were observed irrespective of the injection conditions. This is interpreted to mean a temporary interruption of reaction due to $MgCl_2$ formation after the initial Kroll reaction. In addition, when the cross section of the sponge was observed, a large amount of spherical Mg particles was observed in $MgCl_2$. We can infer that this is the process of continuously feeding the unreacted Mg surface, so that a continuous Kroll reaction takes place. The sponge appearance showed that the coalescence or growth of the Kroll reacted Ti particles can be controlled by the cooling rate.