• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.216-225
• /
• 2011

Following the proliferation of three-dimensional video contents and displays, many terrestrial broadcasting companies have been preparing for stereoscopic 3DTV service. In terrestrial stereoscopic broadcast, it is a difficult task to code and transmit two video sequences while sustaining as high quality as 2DTV broadcast due to the limited bandwidth defined by the existing digital TV standards such as ATSC. Thus, a terrestrial 3DTV broadcasting with a heterogeneous video codec system, where the left image and right images are based on MPEG-2 and H.264/AVC, respectively, is considered in order to achieve both high quality broadcasting service and compatibility for the existing 2DTV viewers. Without significant change in the current terrestrial broadcasting systems, we propose a joint rate control scheme for stereoscopic 3DTV service based on the heterogeneous dual codec systems. The proposed joint rate control scheme applies to the MPEG-2 encoder a quadratic rate-quantization model which is adopted in the H.264/AVC. Then the controller is designed for the sum of the left and right bitstreams to meet the bandwidth requirement of broadcasting standards while the sum of image distortions is minimized by adjusting quantization parameter obtained from the proposed optimization scheme. Besides, we consider a condition on maintaining quality difference between the left and right images around a desired level in the optimization in order to mitigate negative effects on human visual system. Experimental results demonstrate that the proposed bit rate control scheme outperforms the rate control method where each video coding standard uses its own bit rate control algorithm independently in terms of the increase in PSNR by 2.02%, the decrease in the average absolute quality difference by 77.6% and the reduction in the variance of the quality difference by 74.38%.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.39-44
• /
• 2009

The advance of communication and networking technology enables high bandwidth multimedia data transmission. The development of high performance compression technology such as H.264 also encourages high quality video and audio data transmission. The trend requires efficient protection system for digital media rights. We propose an efficient digital media protection system using elliptic curve cryptography. Only key parameters are encrypted to reduce the burden of complex encryption and decryption in the proposed system, and the digital media are not played back or the quality is degraded if the encrypted information is missing. We need a playback system with an ECC processor to implement the proposed system. We implement an H.264 decoding system with a configurable ECC processor to verify the proposed protection system We verify that the H.264 movie is not decoded without the decrypted information.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.3
• /
• pp.8-15
• /
• 2007

Recently, it is important to process multimedia data efficiently. Especially, in case of retrieval of multimedia information, technique of user interface and retrieval technique are necessary. This paper proposes a new technique which detects cuts effectively in compressed image information by MPEG. A cut is a turning point of scenes. The cut-detection is the basic work and the first-step for video indexing and retrieval. Existing methods have a weak point that they detect wrong cuts according to change of a screen such as fast motion of an object, movement of a camera and a flash. Because they compare between previous frame and present frame. The proposed technique detects shots at first using DC(Direct Current) coefficient of DCT(Discrete Cosine Transform). The database is composed of these detected shots. Features are extracted by HMMD color model and edge histogram descriptor(EHD) among the MPEG-7 visual descriptors. And detections are performed in sequence by the proposed matching technique. Through this experiments, an improved video segmentation system is implemented that it performs more quickly and precisely than existing techniques have.

• Journal of Broadcast Engineering
• /
• v.23 no.4
• /
• pp.495-502
• /
• 2018

JVET (Joint Video Exploration Team) which explored evolving technologies of video coding with capabilities beyond HEVC (High Efficiency Video Coding), released a references software codec named the Joint Exploration Model (JEM) for performance verification of coding technologies. JEM has 67 intra prediction modes that extend the 35 modes of HEVC for intra prediction. Therefore, the enhancement of the coding performance is limited due to the overhead of prediction mode coding. In this paper, we analyze the probabilities of prediction modes selections, and then we propose a more efficient intra prediction mode coding based on the results of analyzed mode occurrence. In addition, we propose a context modeling for CABAC (Context-Adaptive Binary Arithmetic Coding) of the proposed mode coding. Experimental results show that the BD-rate gain is 0.02% on the AI (All Intra) coding structure compared to JEM 7.0. We need to optimize context modeling for additional coding performance enhancement.

• Journal of Korea Multimedia Society
• /
• v.12 no.7
• /
• pp.922-928
• /
• 2009

In H.264 as the newest video standard, 9 modes are used in order to predict the signal values of a block composed with several pixels by intra prediction. From these process, H.264 can bring high compression ratio in the encoded signal but the use of total 9 modes can give the inefficiency of the increase of the complexity induced by the amount of operation processing or the number of searching which is applied to compare adjacent pixels. This paper proposes a simplification method of prediction mode for the intra-picture coding by considering subjective interest region. There are certain region being interested within a picture of the video sequence. This region requires better subjective picture quality than the other regions. The proposed method increases the simplification of prediction mode by providing just essential modes of total 9 modes for less interest regions compared with the interest region. It is possible to get the additional 11%$\sim$15% simplification of the prediction mode by the proposed method, compared with the conventional method which simplifies the prediction mode for all of the picture by using the prediction characteristics only.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2008.11a
• /
• pp.81-84
• /
• 2008

최근 센서네트워크와 같은 에너지 제한 환경을 위한 경량화 부호화 기술의 필요성이 대두됨에 따라 분산 소스 부호화 기술(Distributed Source Coding)의 응용기술로 비디오 부호화 복잡도의 대부분을 차지하는 움직임 예측/보상과정을 부호화기가 아닌 복호화기에서 수행하는 분산 비디오 부호화 기술(Distributed Video Coding)에 대한 연구가 활발히 이루어져 왔다. 이에 가장 대표적인 기술인 Wyner-Ziv 코딩 기술은 채널 코드를 이용하여 원본 프레임과 이에 대한 복호화기의 예측영상인 보조정보 사이의 잡음을 제거하여 영상을 복원한다. 일반적으로 보조정보는 원본영상에 유사한 키 프레임간의 프레임 보간을 통하여 생성되며 채널 코드는 Shannon limit에 근접한 성능을 보이는 Turbo 코드나 LDPC 코드가 사용된다. 이와 같은 채널 코드의 복호화는 채널 잡음 모델에 기반하여 수행되어지며 Wyner-Ziv 코딩 기술에서는 이 채널 잡음 모델을 '상관 잡음 모델' (Correlation Noise Modeling)이라 하고 일반적으로 Laplacian이나 Gaussian으로 모델화 한다. 하지만 복호화기에는 원본 영상에 대한 정보가 없기 때문에 정확한 상관 잡음 모델을 알 수 없으며 잡음 모델에 대한 예측의 부정확성은 잡음 제거를 위한 패리티 비트의 증가를 야기해 부호화 기술의 압축 성능 저하를 가져온다. 이에 본 논문은 원본 프레임과 보조정보 사이의 잡음을 정확하게 예측하여 잡음을 정정할 수 있는 향상된 상관 잡음 모델을 제안한다. 제안 방법은 잘못된 잡음 예측에 의해 Laplacian 계수가 너무 커지는 것을 방지하면서 영상내의 잡음의 유무에 별다른 영향을 받지 않는 새로운 문턱값을 사용한다. 다양한 영상에 대한 제안 방법의 실험 결과는 평균적으로 약 0.35dB에 해당하는 율-왜곡 성능 향상을 보여주었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.2
• /
• pp.149-159
• /
• 2001

The conventional block-based motion prediction suffers, especially in low bit-rate video application, from shortcomings such as blocking artifacts of motion field and unstable motion estimation. To overcome the deficiency, this paper proposes one method of adopting a new motion compensation scheme based on the irregular triangular mesh structure while keeping the current block-based DCT coding structure of H.263 as much as possible. To represent the reconstructed previous frame using minimal number of control points, the proposed method designs content-adaptive irregular triangular meshes, and then, estimate the motion vector of each control point using the affine transformation-based matching. The predicted current frame is obtained by applying the affine transformation to each triangular mesh. Experiment with the several real video sequences shows improvement both in objective and subjective picture quality over the conventional block-based H.263 method.

• Journal of Broadcast Engineering
• /
• v.16 no.4
• /
• pp.624-634
• /
• 2011

Recently, the JCT-VC is developing the next generation video coding standard that is called HEVC. HEVC has adopted many coding technologies increasing coding efficiency. For chroma interpolation, DCT-based interpolation filter showing better performance than the linear filter in H.264/AVC was adopted in HEVC. In this paper, a combined filter that utilizes the FIR filter and the linear filter in H.264/AVC is proposed to increase coding efficiency. When the proposed method is compared with DCT-based interpolation filter, the experimental results for various sequences show that the average BD-rate improvements on chroma U and V components are 0.9% and 1.1%, respectively, in the high efficiency case of random access structure, those on U and V components are 1.1% and 1.1%, respectively, in the low complexity case of random access structure, those on U and V components are 0.9% and 1.4%, respectively, in the high efficiency case of low delay structure, and those on U and V components are 1.8% and 1.8%, respectively, in the low complexity case of low delay structure.

• The Journal of the Korea Contents Association
• /
• v.16 no.10
• /
• pp.514-521
• /
• 2016

The High Efficiency Video Coding (HEVC) standard provides superior coding efficiency by utilizing highly flexible block structure and more diverse coding modes. However, rate-distortion optimization (RDO) process for the decision of optimal block size and prediction mode requires excessive computational complexity. To alleviate the computation load, this paper proposes a new moment-based fast CU size decision algorithm for intra coding in HEVC. In the proposed method, moment values are computed in each CU block to estimate the texture complexity of the block from which the decision on an additional CU splitting procedure is performed. Unlike conventional methods which are mostly variance-based approaches, the proposed method incorporates the third-order moments of the CU block in the design of the fast CU size decision algorithm, which enables an elaborate classification of CU types and thus improves the RD-performance of the fast algorithm. Experimental results show that the proposed method saves 32% encoding time with 1.1% increase of BD-rate compared to HM-10.0, and 4.2% decrease of BD-rate compared to the conventional variance-based fast algorithm.

• The Journal of the Korea Contents Association
• /
• v.9 no.11
• /
• pp.10-17
• /
• 2009

Wyner-Ziv video coding is a new video compression paradigm based on distributed source coding theory of Slepian-Wolf and Wyner-Ziv. Wyner-Ziv coding enables light-encoder/heavy-decoder structure by shifting complex modules including motion estimation/compensation task to the decoder. Instead of performing the complicated motion estimation process in the encoder, the Wyner-Ziv decoder performs the motion estimation for the generation of side information in order to make the predicted signal of the Wyner-Ziv frame. The efficiency of side information generation deeply affects the overall coding performance, since the bit-rates of the Wyner-Ziv coding is directly dependent on side information. In this paper, an improved side information generation method using field coding is proposed. In the proposed method, top fields are coded with the existing SI generation method and bottom fields are coded with new SI generation method using the information of the top fields. Simulation results show that the proposed method improves the quality of the side information and rate-distortion performance compared to the conventional method.