• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.3
• /
• pp.26-35
• /
• 1997

In this study, the drawing characteristics of circular drawbead are examined with the plane strain elastic-plastic FE Method. Both the clamping load and the drawing load investigated by varying the process variables such as drawbead radius, closing depth and friction condition. The effective strain induced by the draw bead is also investigated. In order to verify the results, the computed results are compared with the existing experimental results. It has been found that both the clamping load and drawing loads are related with the geometry of the bead rather than the lubrication conditions.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.44-48
• /
• 1993

산업현장에서부터 실생활용품에 이르기까지 각종판재를 소재로하여 제작하는 가공품은 종류나 수가 매우 많다고 할수 있다. 이러한 제품들을 제작 하기 위해 여러단계의 성형 공정을 거치게 되며 원만한 성형공정 을 수행하기 위한 적절한 판재성형 제어방법으로써 다이곡률 반경의 변화나 블랭크홀딩가압정도의 부분적 변화로 드로잉률을 향상시키는 방법도 있으나 이보다 판재의 성형공정 제어방법에서 공구사이 상하에 비드 를 설치하여 판재를 성형할 경우 성형공정후 제품의 두께 분포가 비교적 균일해지고 드로잉의 마찰저항을 부분적으로 증가시키며 판재성형중 미끄럼 저항의 균형을 이루어 성형시킬 판소재가 절감도며 또한 성형중 주름을 억재하여 드로잉률을 향상시킨다. 다른 방법에 비해 비드는 설차가 간단해서 적절한 형상의 bead set을 선정하여 산업현장에서 실제 사용하고 있으며 또한 소재가 비드를 통과한후 탄성역에서 소성역으로 전환되기에 성형공정 이후 스프링백 현상으로인한 제품형상의 치수가 변하는 현상을 방지하는 효과도 기대할수 있다. 따라서 본 연구에서는 자동차용판재인 아연도금피막 강판으로 실험한 결과와 비드 이론식을 고찰해 보고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.9
• /
• pp.1167-1173
• /
• 2010

Forming of a silencer case was studied using a virtual tryout method. First, the appropriate blank shape was determined by cutting off the undeformed part of the rectangular blank. Then drawbeads were designed such that the formation of wrinkles on the shoulders and pipe connection can be prevented. Finally, the shape bead was designed such that fracture and formation of wrinkles around the pipe connection can be avoided. The prototype of the silencer case was manufactured in accordance with the conditions of the virtual tryout process. By comparing the formability of the prototype with the results of finite element analysis, it was found that the forming of the prototype agreed well with the results of analysis.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.5 s.48
• /
• pp.617-628
• /
• 2000

In this study, the 4-point bending test has been performed in order to estimate the effect of TIG-dressing on fatigue strength and fatigue characteristics quantitatively for non load-carrying fillet welded joints subjected to pure bending. As a result of fatigue tests, fatigue strength of as-welded specimens has been satisfied the grade of fatigue strength prescribed in specifications of domestics and AASHTO & JSSC, and fatigue strength at $2{\times}106cycles$ of TIG-dressing specimens has been increased compared with as-welded specimens. As the result of beachmark tests, fatigue cracks have been occurred at several points, where the radius of curvature and flank angle in the weld bead toes are low, and grown as semi-elliptical cracks, then approached to fracture. As a result of finite element analysis, stress concentration factor in weld bead toes has been closely related to the flank angel and radius of curvature, and between these, the radius of curvature has more largely affected in stress concentration factor than flank angle. As a result of fracture mechanics approaches, the crack correction factor of test specimens has been largely affected on stress gradient correction factor in case a/t is below 0.4. From the relations between stress intensity factor range estimated from FEM analysis and fatigue crack growth rate, fatigue life has been correctly calculated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.3 no.1
• /
• pp.146-154
• /
• 2000

Buckling behavior was studied for the square plate with bead and hole under shear load. Plates were made to examine the effect of bead and hole to the material, aluminum and composite, the effect of flange angle, bead height and bead radius of curvature. There was little difference between buckling loads obtained by the experiment and Rayleigh-Ritz method to the plate. Buckling load could be increased highly when stress concentration to the hole was dispersed effectively using flange. A well-designed plate using bead and flange showed 3 times as much as stiffness to the plate without bead and flange.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.1
• /
• pp.44-47
• /
• 1988

The present experiments of transient temperature variation and temperature fluctuation were conducted by bead type thermistors in pool boiling without a heat surface. The experimentally obtained conclusion were as follows. (1) The high transient temperature Variatian of 11.64.deg. C for a duration of 0.08 sec and a temperature freguency having a duration of 5.6*10$^{-2}$ sec in a flashing were measured. (2) The highest variation of transient temperature was shown at saturated temperature of 80.deg. C and superheat of 7.9.deg. C. (3) Temperature frequency was found to increase with superheat below 60.deg. C of saturated temperature, but above 60.deg. C it was relative to lower superheat and was found to decrease with higher superheat..

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.618-623
• /
• 2020

Spherical phenolic resin beads were synthesized by suspension polymerization at 98 ℃ from phenol, ortho-cresol, formaldehyde, with triethylamine as a basic catalyst, and spherical phenol-cresol copolymer resin beads with relatively low crosslinking density as well. Phenol reacts with formaldehyde at two ortho- and one para- positions to form a crosslinked structure, but ortho-cresol instead of phenol reduces the crosslinking density during copolymerization due to the methyl group at a ortho- position. As a result, spherical phenol-cresol copolymer beads showed more shrinkage with decreasing apparent density compared to the spherical phenol beads when carbonized at 700 ℃ under nitrogen. As the molecular weight of the cresol oligomer increases, the pore radius of the carbonized copolymer beads decreases, which is consistent with the density and shrinkage results. It was confirmed that the characteristics such as density decrease, shrinkage, yield and so on during carbonization can be controlled by controlling the degree of crosslinking of the spherical phenolic resin particles with cresol.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.479-492
• /
• 2004

When U-ribs of steel deck plates are connected at the field, overhead welding should be done with backing strips. Misalignments may occur and lead to eccentric moments as well as high stress concentrations at welded joints. In this study, stress analyses and fatigue tests were carried out. Stress analyses for U-ribs' welded joints with backing strips were performed with different misalignments, root shapes, root gaps, and backing strip sizes. From the stress analyses, the stress concentration factors increased with increasing misalignments and root gaps. With the fixed misalignments and root gaps, the stress concentration factors obtained in the case of the semi-circle root shape were lower than those in the case of the right-angle root shape. It was verified that backing strip sizes have little influence on stress concentration factors. The fatigue tests for U-ribs' welded joints with backing strips indicated that increased misalignments shorten fatigue life drastically and cracks usually initiate at the root of the base metal and are propagated to the weld bead surface. Based on the results of the stress analyses, root-shape control methods were developed to mitigate stress concentration by changing welding condition control, radius curvature, and flank angle.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.583-590
• /
• 2008

Blasting has been applied in newly-built steel structures for cleaning forged surfaces and increasing the adhesive property of applied painting systems. However, the effect of the blast cleaning on fatigue behavior of welded joints is not clear. In this paper, fatigue tests were carried out on out-of-plane gusset welded joints and the effect of the blast cleaning on the fatigue behavior was studied. The curvature radius at the weld toe of the surface-treated specimens by using the blast method is larger than that of as-welded specimens. By the blast cleaning compressive residual stresses were induced into weld toes. The experimental results showed that the fatigue life of surface-treated specimens is longer than that of as-welded specimens, even though the fatigue life of surface-treated specimens and that of as-welded specimens are not clearly different in the high stress range. About a 160% increase in fatigue limit could be realized by using blast cleaning.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.6
• /
• pp.701-713
• /
• 2000

In this study, the 4-point bending test been performed in order to estimate effect of grinding on fatigue characteristics quantitatively for as-welded specimen, grinding specimen & TIG-dressing specimen for non load-carrying fillet welded joints subjected to pure bending. As a result of fatigue tests, fatigue strength at $2{\times}106$cycles of grinding specimen and TIG-dressing specimen has been increased compared with as-welded specimen and satisfied the grade of fatigue strength prescribed in specifications of domestics and AASHTO & JSSC. As a result of beachmark test, fatigue cracks on all specimens have occurred at several points where stress