• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.201-202
• /
• 2014

본 논문에서는 비대칭 하프브리지 컨버터의 비대칭 시비율을 개선한 컨버터를 제안한다. 일반적인 비대칭 하프 브리지 컨버터의 경우 홀드업 타임 조건 때문에 넓은 입력 전압 범위를 가지게 되고, 정상 동작시 스위치의 비대칭 동작이 심화 된다. 이러한 스위치의 비대칭 동작으로 변압기의 자화 전류 옵셋이 증가하고 변압기 부피 및 2차측 정류기들의 전압 불균형이 심화되어 컨버터 효율이 감소하게 된다. 하지만 제안된 컨버터에서는 보조 스위치와 보조 커패시터를 이용, 변압기의 권선비를 조정하여 정상 동작 시 정류기들의 비대칭을 저감하였고, 변압기의 자화 전류 옵셋을 감소시켜 높은 효율을 달성하였다. 제안된 컨버터의 타당성을 검증 하기 위해 300W 프로토 타입을 제작하여 실험을 진행 하였다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.251-260
• /
• 1995

It has been reported that Co-based amorphous ferromagnetic alloys annealed in a small magnetic field develop a reproducible, asymmetric hysteresis loop. If the direction of the field during annealing is regarded as +, the magnetization reversal from - to + is smooth and reversible, with its slope determined by the demagnetizing field of the sample. This phenomenon is called the asymmetric magnetization reversal (AMR). The shape of the hyster-esis loop depends sensitively on the condition during the anneal and the alloy composition. Here, we report on the effect of the annealing temperature and time on AMR in a zero magnetostrictive ferromagnetic amorphous alloy. The AMR effect develops in a very short time at a reasonably high temperature, but is stabilized by annealing for a prolonged time.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.261-268
• /
• 1995

In order to investigate the origin of the asymmetric magnetization reversal effect, we studied the variation of magnetic hysteresis loops with the alloy composition in amorphous ferromagnetic alloy ribbons of ${(Fe_{1-x}Co_{x})}_{75}Si_{10}B_{15}$ system annealed at $380^{\circ}C$ for 16 hours in a zero field condition. The asymmetric magnetization reversal effect developed more strongly in amorphous ribbons having two metallic components than in ribbons having a single metallic component. The effect developed more strongly in ribbons showing a smaller value of the saturation mag¬netostriction. The development of the asymmetric magnetization reversal effect was affected by the ratio of two metallic components as well as the magnitude of the saturation magnetostriction.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.620-622
• /
• 2001

자성체 코어의 비선형 특성을 이용하여 DC와 AC 전류를 측정하는 Zero-Flux Current Transformer는 정밀 전류 측정용으로 많이 연구되고 있다. Zero-Flux Current Transformer는 DC 대전류 측정에 합당하며 저 전류 측정에 사용될 경우 소모전류, 안정되고 첨예한 필터 제작, magnetic modulator에 의한 zero point drift, 자화 전류가 비대칭일 때 출력 등과 같은 문제가 해결되어야 한다. 그리고 상용으로 사용하기 위하여 Hand-Held Type으로 제작되어야하며 동작시의 소모전류가 작고 정확도가 우수하여야 한다. 본 연구에서는 자화 전류가 비대칭일 때 출력을 zero로 만들기 위하여 사용하는 필터와 복잡한 회로로 구성된 magnetic modulator 부분을 여러개의 peak detector를 사용하여 AC와 DC를 측정하는 클램프미터를 개발하였으며 그 특성에 대한 내용을 기술하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.770-778
• /
• 2023

Sea surface wind is an important variable for elucidating the atmospheric-ocean interactions and predicting the dangerous weather conditions caused by oceans. Accurate sea surface wind data are required for making correct predictions; however, there are limited observational datasets for oceans. Therefore, this study aimed to obtain long-period high-resolution sea surface wind data. First, the ERA5 reanalysis wind field, which can be used for a long period at a high resolution, was regridded and synthesized using the asymmetric typhoon wind field calculated via the Generalized Asymmetric Holland Model of the numerical model named ADvanced CIRCulation model. The accuracy of the asymmetric typhoon synthesized wind field was evaluated using data obtained from Korea Meteorological Administration and Japan Meteorological Administration. As a result of the evaluation, it was found that the asymmetric typhoon synthetic wind field reproduce observations relatively well, compared with ERA5 reanalysis wind field and symmetric typhoon synthetic wind field calculated by the Holland model. The sea surface wind data produced in this study are expected to be useful for obtaining storm surge data and conducting frequency analysis of storm surges and sea surface winds in the future.

• Journal of the Korean Magnetics Society
• /
• v.21 no.2
• /
• pp.52-55
• /
• 2011

Spin-transfer torque is a useful tool to control the magnetic state in nanostructures. In magnetic tunnel junctions, the spin-transfer torque has two components, the in-plane spin torque and the perpendicular spin torque. While properties of the in-plane spin-transfer torque are relatively well understood, properties of the perpendicular spin-transfer torque still remain controversial. A recent experiment demonstrated that in asymmetric magnetic tunnel junctions, the bias voltage dependence of the perpendicular spin-transfer torque contains both linear and quadratic terms in the bias. However it still remains unexplored how the bias voltage dependence changes as a function of material parameters. In this paper, we systematically investigate the perpendicular spin-transfer torque in asymmetric magnetic tunnel junction by varying spin splitting energy, work function difference, and Fermi energy of the ferromagnetic metal leads.

• Journal of the Korean Magnetics Society
• /
• v.19 no.6
• /
• pp.191-196
• /
• 2009

Magnetic bias phenomena of field-annealed CoFeSiB amorphous ribbons showing asymmetric giant magnetoimpedance was investigated by MOKE method. The specimens removed the crystalline layer at one surface side by chemical etching were prepared and measured magnetization curves by MOKE to investigate the effect of the crystalline layer on magnetization of inner soft amorphous phase. We observed the shift of hysteresis loop, and concluded that the crystalline layer exerts bias field effect on inner soft amorphous phase and the direction of bias filed is opposite to the magnetization direction of surface crystalline layer.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.72-75
• /
• 2005

The profiles of the second-order higher harmonics during B-H hysteresis loop have been measured as functions of the tensile stress in grain-oriented $3.2{\%}$ Si steels. The observed harmonics profiles have been analyzed in terms of the nonlinear, asymmetric magnetization which reflects the domain reorientation under the field. The field interval of the second-order higher harmonics is related to the nucleation and annihilation fields and a measurement method for the magnetostriction is proposed using the harmonics profiles under tensile stress.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.4
• /
• pp.73-76
• /
• 2000

The magnetization direction of bond magnet is decided by the flux distribution of injection mold during the manufacturing process. The injection mold for the magnetic roller of the laser printer is designed and analysed to fit the design specification. The experiment showed that the flux distribution of a magnet roller agreed with the analysis and the given specifications.

• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.112-116
• /
• 1996

스퍼터링법으로 제조한 NiFeCo/Cu/NiFeCo/FeMn 스핀밸브 자성 다층막의 자기적 성질과 자기저항에 대해 연구하였다. Cu 사잇층 두께가 15 .angs. 인 경우 약 6%의 자기저항을 얻을 수 있었다. NiFeCo/FeMn에서 교환이방성 자계는 약 20 Oe 정도였는데, 이는 NiFe/FeMn 계 스핀밸브 구조에서 보고된 값(100 Oe 이상) 보다 현저히 작은 것이다. 3 mTorr에서 제조한 NiFeCo 박막은 약 10 Oe 정도의 큰 보자력을 보임으로써 비슷한 조건에서 제조한 NiFe 박막의 경우(약 2 Oe)보다 상당히 큰 값을 갖는 것으로 관찰되었다. 작은 교환이방성 자계와 큰 보자력으로 인해 음 .rarw. 양 방향과 양 .rarw. 음 방향의 자화거동에 있어서 비대칭적인 자기저항 이력곡선 거동을 보이는 것으로 나타났다.