• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.4 s.247
• /
• pp.442-450
• /
• 2006

This paper describes the new modal analysis method to detect the presence of the breathing crack in a general rotor system with disk asymmetry and stator anisotropy. It is proposed that the modal analysis using directional frequency response functions (dFRFs), which, accounting for the directivity in modes, clears the heavily over-lapping of other harmonics occurring from non-isotropic properties in addition to those due to crack, can provide an effective method to detect the modes by a crack. The simulations from the simple general rotor model show that the r-dFRFs (reverse dFRFs) for asymmetry confirms a good indicator of the presence of the breathing crack and the instability is primarily influenced by the shaft asymmetry than the breathing crack.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.716-720
• /
• 2006

In order to examine the effect of constant excitation on nonlinear interactions in vibrating modes of circular plates, we added a constant term to a harmonic excitation. A two-degree-of freedom system is derived by using the Galerkin's procedure. The system is shown to have quadratic and cubic nonlinearities subjected to a harmonic excitation.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1095-1096
• /
• 2011

본 논문은 고속 SRM의 운전 개선을 위한 4-Level 컨버터를 제안한다. 제안된 컨버터는 비대칭 컨버터에 비하여 고속에서의 운전 성능을 개선하고, 추가적인 전원장치 없이 환류 구간에서 환류 되는 에너지를 부스트 커패시터에 충전하여 이를 감자 구간에 활용함으로서 감자 구산에서 감자 시간을 줄여 여자 되지 않는 상에서 발생하는 Tail 전류가 여자 되는 상에 미치는 영향을 최소화 하였다. 또한 각 독작 모드에 따른 전류제어 모드를 선택함으로써, 4-Level 컨버터에 적합한 전류제어기를 제안하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.1
• /
• pp.65-72
• /
• 1994

Collapse characteristics of thin-walled hatted section tubes are investigated. The square section members with flanges are substituted by the equivalent rectangular tube. The stiffening effects of flanges are transformed to the restraining plate with the equivalency of buckling strength. The square tubes of single-hatted and double-hatted sections are investigated. The double-hatted section members show symmetric and antisymmetric crushing modes depending on the stiffness of flanges. The single-hatted section members show only symmetric modes. The bifurcation point of the compact crushing modes are investigated by experiments and shown almost same thickness-width ratio of the rectangular tubes. A large maximum crippling strength can be obtained by double-hatted section members with proper flange dimensions.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.170-173
• /
• 2003

음향방출 신호를 이용하여 목재 섬유판(fiberboards)의 위치표정의 유용성 유무를 실험적으로 검증하였다 위치표정의 정확도를 향상하기 위해 신호처리 방법중의 하나인 웨이블릿 변환 디노이징 기법을 활용하여 저주파수인 대칭모드(굽힘파)를 활용하고, 고주파수인 비대칭모드(팽창파)를 제거하여 신호를 재구성함으로써 섬유관의 위치표정시 문턱값 통과방법을 사용할 때 발생하는 도달시간차를 최소화 할 수 있음을 확인하였다. 디노이징 기법을 활용한 섬유판의 위치 표정과 굽힘강도에 대한 사상총수를 기초로 하여 목재 구조물 및 문화재의 건전성을 평가 할 수 있을 것으로 기대된다.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.125-130
• /
• 2001

It is well known that many real systems have asymmetric mass, damping and stiffness matrices. In this case, the method for calculating eigenpair sensitivity is different from that of symmetric system. To determine the derivatives of the eigenpairs in asymmetric damped case, a modal method was recently developed by Adhikari. When a dynamic system has many degrees of freedom, only a few lower modes are available, and because the higher modes should be truncated to use the modal method, the errors may become significant. In this paper a procedure for determining the sensitivities of the eigenpairs of asymmetric damped system using a few lowest set of modes is proposed. Numerical examples show that proposed method achieves better calculating efficiency and highly accurate results when a few modes are used.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.11a
• /
• pp.169-174
• /
• 2004

이 논문에 서 는 DVB-S2 BC(Backward Compatibility) 모드에서 복조방식 에 따른 수신성 능을 분석하였다. 송신기는 DVB-S(HP)와 DVB-S2(LP) 스트림을 계층적 비대칭 8-PSK로 변조시킨 신호를 전송하며, 수신기는 계층적 변조 신호를 복조하기 위하여 LSB 에서 MSB순으로 복조하는 방식과 사분면 추정지수와 LLR 계산기를 이용한 계층적 복조방식을 적용할 수 있다. 이 논문은 두 복조방식에 대한 성능분석을 AWGN 및 비선형 채널에서 통계적 분석과 모의실험을 통하여 수행하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.164-165
• /
• 2003

현재의 초고속 인터넷 서비스를 위한 광 인터넷의 기술 확산과 이들의 광통신 가입자망과의 연동으로 가입자 및 Hub 에서의 대규모 광 모듈 수요가 예상되고 있다. 이러한 광 모듈에서 필수적인 소자중의 하나가 파장 여과기이며, 그 수요 충족을 위해서는 소형화와 저가격화가 필수적이다. 이를 만족하기위해 실리카 기반의 다중모드간섭 소자를 이용한 파장 여과기가 개발중에 있다. 하지만, 일반적으로 광소자는 편광에 대한 문제점을 가지고 있기 때문에 이를 고려하지 않으면 출력 도파로에서 효율적인 출력파워를 얻어낼 수 없다. (중략)

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.10a
• /
• pp.509-514
• /
• 2001

It is well known that many real systems have asymmetric mass, damping and stiffness matrices. In this case, the method for calculating eigenpair sensitivity is different from that of symmetric system. To determine the derivatives of the eigenpairs in asymmetric damped case, a modal method was recently developed by Adhikari. When a dynamic system has many degrees of freedom only a few lower modes are available, and because the higher modes should be truncated to use the modal method, the errors may become significant. In this paper a procedure for determining the sensitivities of the eigenpairs of asymmetric damped system using a few lowest set of modes is proposed. Numerical examples show that proposed method achieves better calculating efficiency and highly accurate results when a few modes are used.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.47-52
• /
• 2018

Wi-Fi enabled Internet of Things (IoTs) had a substantial impact on society, economy and industry. However wireless connectivity technologies in unlicensed band such as Wi-Fi are vulnerable to interferences. They also face difficulty providing wireless connectivity over long range in dense networks due to the dynamically changed interference effect and asymmetric interference conditions. In this paper, robust acknowledgement transmission scheme is proposed for long range IoTs. According to the proposed scheme, it is possible to control the transmission rate of the transmission success rate of the response frame by adjusting the transmission rate of the response frame when the interference is present asymmetrically. It is also possible to use higher data rate when high quality link is guaranteed. The evaluation results demonstrated the proposed scheme improves the aggregate throughput by at most 9 Mbps when 20 MHz bandwidth transmission mode was adopted.