• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.380-385
• /
• 2006

To establish law-put fertilization technique and increase of fertilization efficiency during cultivation of vinyl mulching for plant, the improvement of soil properties, nutrition efficiency and yields by band spotty fertilization(BSF) using band spotty applicator was carried out at garlic(Alltuiti sativum L.) field in Honam Agricultural Research Institute from 2001 to 2002 for 2 years. The value of pH and the content of total nitrogen, organic matter, exchangeable potassium and calcium of soil after experiment were increased but the content of available phosphate was decreased than soil before experiment. Uptake amounts of nitrogen fertilized by plants were more than in BSF plots($89{\sim}111kg\;ha^{-1}$) compared to in CF(conventional fertilization) Plot ($76kg\;ha^{-1}$) and nitrogen use efficiency were high in BSF plots(42.9~58.2%) compared to in CF plot(34.9%). Also Uptake amounts of potassium fertilized by plants were more than in BSF plots($34{\sim}58kg\;ha^{-1}$) compared to in CF plot($33kg\;ha^{-1}$) and potassium use efficiency were high in BSF plots(21.6~41.2%) compared to in CF plot(19.4%). Residual amount of nitrogen fertilized on soil were more than in BSF plots($38{\sim}54kg\;ha^{-1}$) compared to in CF plot($22kg\;ha^{-1}$) while loss amount of nitrogen fertilized on soil were less than in BSF plots($32{\sim}53kg\;ha^{-1}$) compared to in CF plot($120kg\;ha^{-1}$). Also Residual amount of potassium fertilized on soil were more than in 100% BSF plot($109kg\;ha^{-1}$) compared to in CF plot($72kg\;ha^{-1}$) while loss amount of nitrogen fertilized on soil were less than in BSF plots($14{\sim}38kg\;ha^{-1}$) compared to in CF plot($113kg\;ha^{-1}$). The BSF plots were increased plant height, leaf number, leaf sheath diameter, bulb diameter and height compared to CF plot. The total yields of garlic were more increased 14~19% because of high large bulb rate, commercial yields in 70, 100% BSF plots compared to in CF plot($102.9Mg\;ha^{-1}$). It was found that 70% band spotty fertilization was more effective as fertilization method to reduce both environmental pollution and chemical nitrogen fertilizer in plastic film mulching cultivation.

• Journal of the Korean Arthroscopy Society
• /
• v.15 no.2
• /
• pp.158-164
• /
• 2011

As the instruments as well as techniques for hip arthroscopy have developed, the interests and understandings of acetabular labral tear have also increased. As a consequence, the diagnosis itself was increased. However, it is still difficult to be diagnosed accurately in an ordinary clinic. In this brief review, the clinical and radiological characteristics and diagnostic implications of acetabular labral lesions were described to help the surgeon to make a right decision.

• Korean Journal of Optics and Photonics
• /
• v.28 no.4
• /
• pp.141-145
• /
• 2017

We design an F/1.8 smart -phone camera lens utilizing he Forbes aspherical-surface equation, which can effectively create a strong asphere, compared to the conventional, standard aspherical equation. We also describe the principal methodology and procedural steps of optical design to achieve specifications.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.313-320
• /
• 2004

We present a null testing method fer aspheric surfaces, utilizing a phase-shifting diffraction grating interferometer along with a binary amplitude computer generated hologram (CGH). The binary amplitude CGH is designed to compensate for the wavefront between a point source and the aspheric surface under test. The fringe visibility of the grating interferometer is controlled easily by selecting suitable grating diffraction orders for the measurement and reference wavefronts or by optimizing the groove shape of the grating used. The binary amplitude CGH is designed by numerical analysis of ray tracing and fabricated using e-beam lithography for autostigmatic testing. Experimental results of a large-scale aspheric mirror surface are discussed to verify the measurement performance of the proposed diffraction grating interferometer.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.6
• /
• pp.499-505
• /
• 1992

This experiment was carried out to find out the optimum application method of slow-release fertilizer under different soil textures, clay loam(Deogpyeong series), sandy loam (Gangseo series) in the southern region(Milyang, Kyeongnam) of Korea. The fertilizers used were Chosun slow-release fertilizer(silicate latex coated fertilizer: N-P$_2$O$_{5}$-K$_2$O=18-12-13) and Meister 15 (thermoplastic resin coated fertilizer : N-P$_2$O$_{5}$-K$_2$O=14-14-14). The two whole basal application methods such as side band placement at transplanting time of rice plant(cv.Donghaebyeo) and incorporation with soil as basal were tested. The released amount of ammonium nitrogen from the soils for 4 days submerged was 95ppm in sandy loam and 60ppm in clay loam. The greenish degree of rice leaf was higher at the whole plow layer placement method than the others. The nitrogen efficiencies of the fertilizers were Meister 15 > convention > Chosun in order and between the application methods were similiar. The growth status was better at the whole plow layer placement application method of Meister 15 regardless of soils and seedling ages. The ripening ratio was increased at slow-release fertilizer application, and between application methods, whole plow layer placement was lower because of lodging damage. The yield in clay loam soil showed a significant difference between the ferilizers, but there were slight differences between the application methods and fertilizers in sandy loam soil. As a result, the slow-release fertilizer, Meister 15, applied at the whole layer showed a good rice growth and seemed a plausible fertilizing method.

• Communications of Mathematical Education
• /
• v.26 no.2
• /
• pp.221-249
• /
• 2012

The purpose of this study is to investigate students decision-making progress through ill-structured problem solving process. For this study, 25 fifth graders in an elementary school were observed by applying ABCDE model (Analyze - Browse - Create - Decision making - Evaluate), and analyzed their decision-making progress analyzing framework which follows 3 steps - making their own decision, discussing/revising with peers, and lastly decision making/solving problem. Upper two groups with better performance in ill-structured problem solving model among 6 groups showed active discussion in group and decision making process with 3 steps (making their own decision, discussing/revising with peers). Even though their decisions are not good-fit to mathematical reasoning result, development and application of ill-structured problems would bring better ability of high level thinking and problem solving to students.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.3
• /
• pp.124-131
• /
• 2007

Aspheric glass lenses was fabricated by glass molding press(GMP), which is a plano-aspheric convox shape and intended for use as an optical design of 3 megapixel and 2.5 magnifications zoom in a camera phone module. Transcription ratio of form accuracy (PV) as well as resolution properties was measured for evaluation the molded lens. Form accuracy (PV) of the mold surface was $0.127\;{\mu}m$ in an aspheric and $0.168\;{\mu}m$ in a plano, in case of the molded lens it shows $0.205\;{\mu}m$ and $0.223\;{\mu}m$, respectively. Resolution of the molded lens was measured as a MTF[Contrast]. The molded lens shows contrast of 32.9% at 80 1p/mm and the value is similar with contrast of 33% obtained simulation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.428-428
• /
• 2007

최근 고화질 카메라폰이 경박단소화 되는 경향에 따라 Plastic렌즈 또는 구면 Glass렌즈만으로는 요구되는 광학적 성능 구현이 힘들기 때문에 비구면 Glass렌즈에 대한 요구가 증가하고 있다. 이러한 비구면 Glass렌즈는 일반적으로 초경합금 성형용 코어를 이용한 고온압축 성형방식으로 제작되어지기 때문에 코어면의 초정밀 연삭가공 및 코어면 코팅기술 개발이 시급한 상황이다. 한편, 대표적인 난삭재 Silicon Carbide(SiC)는 광학적 특성 및 기계적 특성, 전기적 특성 등 우수한 특성을 가진 재료로서 우주망원경, 레이저 광 및 X선 반사용 미러 등 다종, 다양한 용도로 이용되고 있으며 전기, 전자, 정보, 정밀기기의 급격한 발전으로 SiC의 수요가 급격히 증가하고 있다. 비구면 Glass렌즈 성형용 코어를 SiC소재로 제작할 경우 성형용 코어의 수명향상, 렌즈 생산원가의 절감 및 코팅 과정의 간소화 등의 다양한 장점을 가지므로 SiC를 이용한 성형용 코어의 나노 정밀도급 초정밀 연삭가공기술의 개발이 필요하다. 본 논문에서는 3 메가픽셀, 2.5배 광학 줌 카메라폰 모듈용 비구면 Glass렌즈 개발을 목적으로 실험계획법을 적용하여 초경합금 성형용 코어의 연삭조건을 규명하였다. 초경합금 비구면 성형용 코어의 초정밀 연삭가공조건 및 결과를 바탕으로 난삭재인 Silicon Cabide(SiC)의 연삭가공조건을 구하고 이를 이용하여 비구면 Glass렌즈 성형용 코어를 초정밀 연삭가공하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.290-296
• /
• 2019

Head-up displays for vehicles play an important role in displaying various information about the safety and convenience of driving on the windshield of the vehicle. In this study, ultra-precision machining was performed and evaluated as a method for machining a large-area aspheric free-form mirror that is applicable to augmented reality technology. Precision diamond cutting is highly accurate and suitable for the production of advanced parts with excellent surface integrity, low surface roughness, and low residual stress. By using an aspheric free-form mold, it is possible to improve the optical transfer function, reduce the distortion path, and realize a special image field curvature. To make such a mold, the diamond cutting method was used, and the result was evaluated using an aspherical shape-measuring machine. As a result, it was possible to the mold with shape accuracy (PV) below $1{\mu}m$ and surface roughness (Ra) below $0.02{\mu}m$.

• Journal of the Korean Society of Radiology
• /
• v.82 no.5
• /
• pp.1140-1162
• /
• 2021

Tearing of the acetabular labrum is a common cause of chronic hip pain. MR arthrography (MRA) of the hip is the imaging procedure of choice for the evaluation of acetabular labrum. Familiarity with the various imaging findings of MRA of the hip allows recognition of normal variants and differentiation from true pathologic conditions. This article comprehensively reviews the technical aspects and interpretation of MRA of the hip. The appearances of normal and abnormal labra in MRA are discussed. Potential pitfalls in labral tear interpretation, such as sulci around the hip, normal variants of the labrum and plicae, and osseocartilaginous and soft tissue lesions identified on MRA of the hip are also described.