• 제목/요약/키워드: 비결정질

검색결과 35건 처리시간 0.022초

Nd:YAG 레이저를 이용한 비결정질 재료의 용접 시 레이저의 흡수 거동 (Absorption Characteristics of Amorphous Metal during Processing with Nd:YAG laser)

  • 이건상
    • 한국레이저가공학회지
    • /
    • 제2권1호
    • /
    • pp.43-50
    • /
    • 1999
  • For the conventional welding method. the high heat transfer makes the crystallized zone of the work material unavoidable. Whereas the laser is able to weld the amorphous metal without a crystallized zone, because heat transfer is limited within a very small restricted volume. In this paper, the possibilities and the limits of the laser welding were studied to utilize the advantageous properties of amorphous metal foils.

  • PDF

극저온 환경하에서 레이저 용접된 비결정질 재료의 특성에 관한 연구 (Investigation of the Properties of Laser-Welded Amorphous Metal in a Deep Frozen Environment)

  • 이건상
    • Journal of Welding and Joining
    • /
    • 제15권3호
    • /
    • pp.99-108
    • /
    • 1997
  • For the conventional welding method, the high heat transfer makes the crystallization of the work material unavoidable. Whereas the laser is able to weld the amorphous metal without a crystallized zone, because heat transfer is limited withn a very small restricted volume. In this paper, the possibilities and the limits of the laser welding in a deep frozen environment by liquid nitrogen were studied to utilize the advantageous properties of amorphous metal foils. The author investigated, after laser welding in a deep frozen environment with a solid state laser (Nd:YAG-laser), the achievable strengths and the influences of the laser beam parameters on the strengths.

  • PDF

Excimer laser annealing에 의한 결정화 및 High-k Gate-dielectric을 사용한 poly-Si TFT의 특성 (Electric characteristics of poly-Si TFT using High-k Gate-dielectric and excimer laser annealing)

  • 이우현;구현모;오순영;안창근;정종완;조원주
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.19-19
    • /
    • 2007
  • Excimer laser annealing (ELA) 방법을 이용하여 결정화하고 게이트 절연체로써 high-k 물질을 가지는 다결정 실리콘박막 트랜지스터의 전기적 특성을 평가하였다. 다결정 실리콘 박막 트랜지스터는 비결정질 실리콘 박막 트랜지스터 보다 높은 전계 효과 이동도와 운전 용이한 장점을 가진다. 기존의 결정화 방법으로는 다결정 실리콘 박막 트랜지스터의 높은 열 공급을 피할 수 없기 때문에, 매몰 산화막 위의 비결정질 박막은 저온에서 다결정 실리콘 결정화를 위해 KrF excimer laser (248nm)를 이용하여 가열 냉각 공정을 했다. 게다가 케이트 절연체로써 atomic layer deposition (ALD) 방법에 의해 저온에서 20 nm의 고 유전율을 가지는 $HfO_2$ 박막을 증착하였다. 알루미늄은 n-MOS 박막 트랜지스터의 게이트 전극으로 사용되었다. 금속 케이트 전극을 사용하여 게이트 공핍 효과와 관계되는 케이트 절연막 두께의 증가를 예방할 수 있고, 게이트 저항의 감소에 의해 소자 속도를 증가 시킬 수 있다. 추가적으로, 비결정질 실리콘 박막의 결정화 기술로써 사용된 ELA 방법은 SPC (solid phase crystallization) 방법과 SLS (sequential lateral solidification) 방법에 의해 비교되었다. 결과적으로, ELA 방법에 의해 결정화된 다결정 실리콘 박막의 결정도와 표면 거칠기는 SPC와 SLS 방법에 비해 개선되었다. 또한, 우리는 ELA 결정화 방법에 의한 다결정 실리콘 박막 트랜지스터로부터 우수한 소자 특성을 얻었다.

  • PDF

Origin of New Broad Raman D and G Peaks in Graphene Annealed under Oxygen-Free Atmosphere

  • 홍진표;박민규;이은정;황동석;류순민
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.610-610
    • /
    • 2013
  • 그래핀을 구성하는 탄소 원자는 모두 표면에 존재하기 때문에, 맞닿아 있는 물질에 따라 그래핀의 물리적 특성에 민감한 영향을 미치기도 한다. 본 연구에서는 라만분광법과 원자 힘 현미경(atomic force microscopy, AFM)을 이용하여 통상적인 열처리 조건에서 그래핀에 탄화수소가 흡착될 수 있는 가능성을 탐구하였다. 산소가 없는 조건에서 열처리된 그래핀으로부터 D, G, 2D 봉우리와 겹쳐지는 폭이 넓은 새로운 라만 봉우리들이 관찰되었다. 열처리 시간, 온도 및 진공도에 따른 라만 스펙트럼의 변화와AFM에 의해 확인된 표면의 구조 변화로부터 새로이 관찰된 라만 봉우리는 탄화수소의 탄화에 의해 그래핀의 표면에 형성된 비결정성 탄소물질(amorphous carbon)임을 확인하였다. 기계적 박리법과 화학기상증착법으로 시료를 준비할 때 사용된 폴리머 잔유물이 열처리 과정에서 탄화수소를 배출하는 것으로 판단된다. 이 연구는 그래핀 소자의 작동에 있어서 환경적인 효과를 이해하고 탄화에 의해 그래핀 표면에 만들어진 비결정질 탄소를 정량화하는데 도움을 줄 것이다.

  • PDF

촉진 양생한 무기계 MiDF 콘크리트에서 실리카질 원료의 반응성에 관한 기초 연구 (Fundamental Research on Reactivity of Silica Source in the Rapidly Cured Inorganic Micro-Defect-Free(MiDF) Concrete)

  • 최홍범;김진만
    • 한국건설순환자원학회논문집
    • /
    • 제7권2호
    • /
    • pp.166-173
    • /
    • 2019
  • 본 연구에서는 오토클레이브를 활용한 촉진양생 조건에서 실리카 원료의 반응 특성 및 이를 활용한 무기계 MiDF 콘크리트의 기초 특성을 검토하였다. 다양한 나노 물질의 반응성을 알아보기 위한 용출 특성 실험에서 오토클레이브 양생 시 Si 이온의 용출은 비결정질의 원료에서 더 높게 나타났다. 상수 분위기에서 오토클레이브 양생된 고형물은 비결정질 원료일수록 높은 질량 감소를 보였는데, 이는 이온의 용출량이 높기 때문으로 사료된다. $Ca(OH)_2$ 수용액 조건에서는 비결정질 원료가 많은 질량 증가를 보였는데, 이는 C-S-H의 생성에 기인한 것이다. 나노 실리카 재료가 MiDF의 특성에 미치는 실험에서 실리카 퓸은 대체율 5.5%까지 MiDF의 압축강도 증가와 흡수율 감소에 기여하였고, 비결정질의 고분말도 나노 실리카는 대체율이 증가함에 따라 압축강도는 저하하였지만 흡수율 감소에 기여하였다. 또한 나노 실리카를 첨가한 시험체는 기대와 달리 10,000nm 이하의 공극은 증가하였지만, 10,000~100,000nm 범위의 공극은 감소하는 것으로 나타났다. 이상의 결과를 통해 비정질의 나노 사이즈 실리카를 활용하여 MiDF 콘크리트의 공극 및 흡수율을 저감이 가능함을 알 수 있었다. 그러나 목표로 하였던 50~10,000nm 사이의 공극을 줄이기 위해서는 시멘트 매트릭스에 나노 재료를 더욱 잘 분산시키는 것이 필요할 것이며, 이에 관한 연구가 지속될 필요가 있다.

비결정질 코발트 인산염 합성 및 NaBH4 가수분해를 통한 수소발생 촉매 활성 연구 (Synthesis of Cobalt Phosphates and their Catalytic Properties of the Hydrogen Generation from the Hydrolysis of NaBH4)

  • 김영용;박준범;권기영
    • 공업화학
    • /
    • 제26권6호
    • /
    • pp.743-745
    • /
    • 2015
  • 본 연구에서는 실온에서 간단히 염기의 양을 조절함으로서 세 가지 종류의 서로 다른 형태의 비결정질의 cobalt phosphate를 합성하였다. 합성된 샘플의 결정성과 형태를 X-Ray Diffraction (XRD)과, Scanning Electron Microscopy (SEM)를 통하여 확인하였으며, sodium borohydride의 수소발생 불균일 촉매로서 적용하였다. 촉매들 중에서 실온에서 합성한 비결정질의 cobalt phosphate 중에서 염기의 양이 가장 적은 10 nm 이하의 얇은 판상 형태의 촉매가 표면적이 넓어 가장 좋은 수소 발생 촉매활성을 보였다.

비결정질 실리콘 박막 상에서의 광열 유동을 이용한 액적 조작 (A Droplet-Manipulation Method using Opto-thermal Flows on Amorphous Silicon Thin Film)

  • 이호림;윤진성;김동성;임근배
    • 한국정밀공학회지
    • /
    • 제31권1호
    • /
    • pp.91-96
    • /
    • 2014
  • We present a droplet-manipulation method using opto-thermal flows in oils. The flows are originated from Marangoni and buoyancy effects due to temperature gradient, generated by the adsorption of light on an amorphous silicon thin film. Using this method, we can transport, merge and mix droplets in an extremely simple system. Since the temperature rise during the operation is small, this method can be used for biological applications without the damage on cell viability.

고강도 Fe계 합금의 고온 변형 특성 (High Temperature Deformation Behavior of Fe-base High Strength Alloys)

  • 권운현;최일동
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제32권6호
    • /
    • pp.938-946
    • /
    • 2008
  • Fe-base amorphous alloy and two crystalline phases composite were fabricated. The effect of temperature and strain rate on mechanical properties was evaluated utilizing compression test. Mixture of non-crystalline and crystalline phases were found using X-ray diffraction (XRD) and differential thermal analysis (DTA) tests. Based on glass transition temperature and crystallization temperature. compression tests were performed in the temperature ranging from $560^{\circ}C$ to $700^{\circ}C$ with $20^{\circ}C$ interval. Relationship between microstructure, including fracture surface morphology, and mechanical behavior was studied. The peak stress of Fe-base amorphous alloy was over 2GPa and expected to have a good wear resistance, but it is expected hard to deform because of low ductility. The peak stress and elongation of two crystalline phases composite was over 1GPa and about 20%, therefore it is possible to deform high strength wear resistant materials such as engine valve.