• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.79-93
• /
• 1984

The dissolved air flotation(DAF) has been shown to be efficient process for the removal of algae ftom water. The efficiency of DAF can be affected by the volume ratio of pressurized liquid to sample, the pressure pressurized liquid, the contact time, the appropriate coagulant and its amount, the water temperature, the turbulence of reactor, the bubble size and rising velocity etc. The purpose of this paper is to compare the practical bubble rising velocity with the theoretical one, to investigate the adhesion phenomenon of bubbles and floc, and the influence of bubble size and velocity upon the process. The results through theoretical review and experimental investigation are as follows: Ives' equation is more suitable than Stokes' equation in computation of the bubble rising velocity. The collection of bubble and algae floc is convective collection type and resulted from absorption than adhesion or collision. The treatment efficiency is excellent when the bubble sizes are smaller than $l00{\mu}m$, and the turbulence of reactor is small. In the optimum condition of continuous type DAF the volume ratio of pressurized liquid to sample is 15%, the contact time in reactor is 15 minutes, the pressure of pressurized liquid is $4kg/cm^2$ and the distance from jet needle to inlet is 30cm.

• The Journal of Engineering Geology
• /
• v.22 no.1
• /
• pp.95-111
• /
• 2012

This study investigated the relationship between the geochemical environment and the occurrence of natural radioactive materials (uranium and Rn-222) in borehole groundwater at an Icheon site. The drill core recovered from the study site consists mainly of biotite granite with basic dykes. The groundwater samples were collected at four different depths in the borehole using the double-packed system. The pH range of the groundwater was 6.5~8.6, and the chemical type was Ca-$HCO_3$. The ranges of uranium and Rn-222 concentrations in the groundwater were 8.81~1,101 ppb and 5,990~11,970 pCi/L, respectively, and concentrations varied greatly with depth and collection time. The ranges of uranium and thorium contents in drill core were 0.53~18.3 ppm and 6.66~17.5 ppm, respectively. Microscope observations and electron microprobe analyses revealed the presence of U and Th as substituted elements for major composition of monazite, ilmenite, and apatite within K-feldspar and biotite. Although the concentration of uranium and thorium in the drill core was not high, the groundwater contained a high level of natural radioactive materials. This finding indicates that physical factors, such as the degree of fracturing of an aquifer and the groundwater flow rate, have a greater influence on the dissolution of radioactive materials than does the geochemical condition of the groundwater and rock. The origin of Rn-222 can be determined indirectly, using an interrelationship diagram of noble gas isotopes ($^3He/^4He$ and $^4He/^{20}Ne$).

• Economic and Environmental Geology
• /
• v.40 no.4
• /
• pp.403-418
• /
• 2007

The objective of this research was to characterize the fate and transport of Cr(VI) contaminated groundwater in the Daejeon industrial area. Five subsidiary monitoring wells were newly installed and two existing wells were utilized for the investigation and the reduction process of Cr(VI) contaminated groundwater of the Daejeon(Mun-pyeong) national groundwater monitoring station. The Cr(VI) concentrations at the shallow aquifer well of the station were in the range of 3.2-4.5 mg/L indicating continuous contamination. However, Cr was not detected at the deep bedrock well and the other monitoring wells except MPH-1 and 3. The Cr(VI) concentrations of MPH-1 and MPH-3 were below the drinking water guideline value (0.05 mg/L). Therefore, the plume of the Cr(VI) contaminated groundwater was predicted to be confined within the narrow boundary around the station. The soluble/exchangeable Cr(VI) concentrations were below the detection limit in all core and slime samples taken from the five newly installed wells. Although the exact source of contamination was not directly detected in the study area, the spatial Cr(VI) distribution in groundwater and characteristics of the core samples indicated that the source and the dispersion range were confined within the 100 m area from the monitoring station. The contamination might be induced from the unlined landfill of industrial wastes which was observed during the installation of an subsidiary monitoring well. For the evaluation of the natural attenuation of Cr(VI), available reduction capacities of Cr(VI) with an initial concentration of 5 mg/L were measured in soil and aquifer materials. Dark-gray clay layer samples have high capacities of Cr(VI) reduction ranging from 58 to 64%, which is obviously related to organic carbon contents of the samples. The analysis of reduction capacities implied that the soil and aquifer materials controlled the dispersion of Cr(VI) contamination in this area. However, some possibilities of dispersion by the preferential flow cannot be excluded due to the limited numbers of monitoring wells. We suggest the removal of Cr(VI) contaminated groundwater by periodical pumping, and the continuous groundwater quality monitoring for evaluation of the Cr(VI) dispersion should be followed in the study area.

• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.513-523
• /
• 2012

The upper sedimentary layer of the Ulleung Basin in the East Sea shows stacked mass-flow deposits such as slide/slump deposits in the upper slope, debris-flow deposits in the middle and lower slope, and turbidites in the basin plain. Shallow gases or gas hydrates are also reported in many area of the Ulleung Basin, which are very important in terms of marine resources, environmental changes, and geohazard. This paper aims at studying acoustic characteristics and distribution pattern of gas-related structures such as acoustic column, enhanced reflector, dome structure, pockmark, and gas seepage in the upper sedimentary layer, by analysing high-resolution chirp profiles. Acoustic column shows a transparent pillar shape in the sedimentary layer and mainly occurs in the basin plain. Enhanced reflector is characterized by an increased amplitude and laterally extended to several tens up kilometers. Dome structure is characterized by an upward convex feature at the seabed, and mainly occurs in the lower slope. The pockmark shows a small crater-like feature and usually occurs in the middle and lower slope. Gas seepage is commonly found in the middle slope of the southern Ulleung Basin. These gas-related structures seem to be mainly caused by gas migration and escape in the sedimentary layer. The distribution pattern of the gas-related structures indicates that formation of these structures in the Ulleung Basin is controlled not only by sedimentary facies in upper sedimentary layer but also by gas-solubility changes depending on water depth. Especially, it is interpreted that the chaotic and discontinuous sedimentary structures of debris-flow deposits cause the facilitation of gas migration, whereas the continuous sedimentary layers of turbidites restrict the vertical migration of gases.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.4
• /
• pp.261-268
• /
• 2002

Biodegradation of monochlorophenols by wood rot fungi such as Daldina concentrica, Trametes versicolor and Pleurotus ostreatus was evaluated by determining their resistance or toxic test and biodegradability. The metabolites of monochlorophenols were also analyzed. Among the three fungi, T. versicolor was the most resistant to 200 ppm of 2-, 3- and 4-chlorophenols, and did not show any inhibitory mycellium growth. But D. concentrica had a little inhibition effect at more than 100 ppm of 3- or 4-chlorophenol. Control cultures of P. ostreatus took even 14 days far the completion of mycellium growth, but the hyphal growth was improved when 2- or 3-chlorophenol were added to the culture. In biodegradation analysis, P. ostreatus showed the highest degradation of 2- or 3-chlorophenol, while T. versicolor was the most effective in 4-chlorophenol. D. concentrica and P. ostreatus slowly degraded 4-chlorophenol. However, T. versicolor had similar degradation capability in the three monochlorophenols, suggesting that the biode- gradation nude is dependent on the fungi as well as the type of monochlorophenol. Several metabolites such as 1,3,5-trihydroxyl benzene, 1-ethyl-1-hydroxyl pentane, 2-propenoicacid, methylmalonic acid and 2-methyl-4-keto-pentan-2-ol were found as products of primary oxidation of 2-, 3- and 4-chlorophenols by intact fungal cultures. fatty acids including tetradecanoic, heptadecanoic and octadecanoic acids were also detected The order of increase of mycellium weight during incubation were P. ostreatus > T. versicolor > D. concentrica. The pH in the culture was not constantly changed depending on incubation days, but the mycellium weight was slightly increased, indicating that the biodegradation of monochlorophenol might have low relationship with the mycellium growth Laccase activities of T. versicolor and P. ostreatus were continuously increased depending on the incubation days, suggesting that the ligninolytic enzyme activity play an important role in the biodegradation of monochlorophenol.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.17 no.4
• /
• pp.324-332
• /
• 2014

In order to reveal the long-term variations of water quality in Jinhae Bay, water qualities had been monitored at 9 survey stations of Jinhae Bay during 2000~2012. The surface and bottom waters concentrations of chemical oxygen demand (COD), dissolved inorganic nitrogen (DIN), dissolved inorganic phosphorus (DIP), and chlorophyll-a (Chl.-a) were higher at the survey stations of Masan Bay than the stations of other Bays. Especially, station 1 which is located at the inner area of Masan Bay had the highest values in the concentrations of COD, DIN, and Chl.-a because there were terrestrial pollutant sources near the station 1 and sea current had not well circulated in the inner area of Masan Bay. In factor analysis, the station 1 also had the highest factor values related to factors which increase organic matters and nutrients in surface and bottom waters of Masan Bay. However, the stations (st.5, st.6, st.7, st.8, and st.9) of other Bays had lower values of the factors. In time series analysis, the COD concentrations of the bottom waters at 8 stations except for station 1 distinctly decreased. However, the COD concentrations of the surface waters showed no distinct decrease trends at all stations. In the concentrations of nutrients (DIN and DIP) of both surface and bottom waters, there were tremendous decrease trends at all stations. Therefore, these distinct decrease trends of the COD in bottom waters and the nutrients in surface and bottom waters of Jinhae Bay could have been associated with water improvement actions such as TPLMS (total pollution load management system).

• Korean Journal of Poultry Science
• /
• v.35 no.4
• /
• pp.367-373
• /
• 2009

This experiment was conducted to determine optimum dietary levels of dietary energy and protein for laying performance and egg quality in organic laying hens. In a $2{\times}3$ factorial arrangement, 360 Hy-Line pullets (21 wk of age) were randomly assigned to experimental diets with 2,800, 3,080, and 3,360 kcal of ME/kg of diet, each containing 16 and 18% CP, respectively. Each dietary treatment was replicated 4 times, and feed and water were provided ad libitum. Experimental birds were raised in floor and received 14h of light throughout 52 weeks of experimental period. The birds were observed for feed consumption, egg production, egg weight, egg mass, feed conversion ratio, Haugh unit, shell thickness, and shell color at 30, 50, and 70 wk of age. Egg production, egg weight, and egg mass were higher (P<0.05) in hens receiving diets with 2,800 kcal/kg of ME/kg of feed than those fed diets containing 3,080 and 3,360 kcal of ME/kg of diets. Eggshell breaking strengths were not significantly different among the dietary ME and CP concentrations. Eggshell thickness was higher (P<0.05) in hens receiving diets with 3,360 kcal of ME/kg of feed than those fed diets containing 2,800 and 3,080 kcal of ME/kg of diets at 50 and 70 week. With increasing in dietary energy levels, the concentrations of blood total cholesterol were also significantly increased. Overall, the laying hens fed organic diet of 2,800 kcal ME/kg and 16% CP showed superior egg production than those of other dietary regimens.

• Korean Journal of Poultry Science
• /
• v.36 no.4
• /
• pp.351-356
• /
• 2009

This work was carried out to investigate the effects of CDDGS (corn distillers dried grains with solubles) colors and phytase levels on the amino acid digestibility of broilers for 7 days. One hundred eight Ross broilers were used in 9 treatment groups with a $3\;{\times}\;3$ factorial design as three colors of DDGSs (DDGS1, DDGS2, and DDGS3) in combination with phytase (0, 500, and 1,000 FTU/kg). The $L^*$ values of DDGS1, DDGS2, and DDGS3 were 55.2, 39.8, and 28.3; the $a^*$ values, 8.8, 7.5, and 6.1; and the $b^*$ values, 41.3, 27.1, and 15.4, respectively. The ileal digestibility of amino acids was decreased as DDGS color was dark, and increased as additive phytase level was increased in the diet. Average digestibilities of essential amino acids were 67.6~80.0%, and those of nonessential amino acids 67.4~77.3. Amino acid digestibility was low in the dark DDGS with no phytase in the diet.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.1
• /
• pp.31-63
• /
• 1991

It was proved that in conventional kiln drying of disks piling position in the kiln exerted a great influence on drying rates, and the larger the variation of disk diameter, the more undulating drying rates of disks. While in vacuum drying disks there was no influence on drying rates. By the end-wrapping treatments and the radial direction of disks tangential surface stresses in the core of disks were slightly compressive in three species. In control disks the drying stresses distributed into one step-style that compressive stresses in the pith side of 6cm from pith were larger than those in the bark side, while in the disks end-wrapped with Korean paper the drying stresses distributed uniformly, because flow rates of free water in disks had no difference between heart-and sap-wood by obstruction of evaporating water from surface of disks by end-wrapping with Korean paper. And end-wrapping with Korean paper considerably restrained those. Tangential differential shrinkage stresses developed the maximum tensile stress near the bark and with approaching the pith the stresses gradually reduced and changed into compressive stresses in near the pith. At the end of vacuum drying the maximum tangential tensile stresses of disks end-wrapped with Korean paper were smaller than those of control disks, and critical moisture contents causing the V-shaped crack of disks end-wrapped with Korean paper were lower than those of control disks because of the set by obstruction of evaporating water of end-wrapping with Korean paper. In the experiment of vacuum drying stress distribution the disks end-wrapped with Korean paper or aluminum foil in three species were free from V-shaped cracks and control disks were defected very slightly by V-shaped cracks. And also disks end-wrapped with Korean paper were free from heart checks in Alnus japonica and Juglans sinensis, and heart checks were occurred very slightly in others. Especially, not to speak of disks end-wrapped with Korean paper, vacuum drying of disks end-wrapped with aluminum foil prevented effectively drying defects, moreover drying times could be shortened, that is. Ginkgo biloba, Alnus japonica, and Juglans sinensis disks could be dried from green to in-use moisture content in 110 hours, 272 hours, and 407 hours, respectively.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.214-221
• /
• 2011

Purpose: To date most of finite element analysis assumed the presence of 100% contact between bone and implant, which is inconsistent with clinical reality. In human retrieval study bone-implant contact (BIC) ratio ranged from 20 to 80%. The objective of this study was to explore the influence of bone-implant contact pattern on bone of the interface using nonlinear 3-dimensional finite element analysis. Materials and methods: A computer tomography-based finite element models with two types of implant (Mark III Br${\aa}$nemark$^{(R)}$, Inplant$^{(R)}$) which placed in the maxillary 2nd premolar area were constructed. Two different degrees of bone-implant contact ratio (40, 70%) each implant design were simulated. 5 finite element models were constructed each bone-implant contact ratio and implant design, and sum of models was 40. The position of bone-implant contact was determined according to random shuffle method. Elements of bone-implant contact in group W (wholly randomized osseointegration) was randomly selected in terms of total implant length including cortical and cancellous bone, while ones in group S (segmentally randomized osseointegration) was randomly selected each 0.75 mm vertically and horizontally. Results: Maximum von Mises strain between group W and group S was not significantly different regardless of bone-implant contact ratio and implant design (P=.939). Peak von Mises strain of 40% BIC was significantly lower than one of 70% BIC (P=.007). There was no significant difference between Mark III Br${\aa}$nemark$^{(R)}$ and Inplant$^{(R)}$ in 40% BIC, while average of peak von Mises strain for Inplant$^{(R)}$ was significantly lower ($4886{\pm}1034\;{\mu}m/m$) compared with MK III Br${\aa}$nemark$^{(R)}$ ($7134{\pm}1232\;{\mu}m/m$) in BIC 70% (P<.0001). Conclusion: Assuming bone-implant contact in finite element method, whether the contact elements in bone were wholly randomly or segmentally randomly selected using random shuffle method, both methods could be effective to be no significant difference regardless of sample size.