• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.3
• /
• pp.386-396
• /
• 1996

The dynamic characteristics of a condenser are numerically studied for the control of air-conditioning systems. The important factors, such as the refrigerant flow rate and refrigerant temperature, air velocity and air temperature at the condenser inlet, are incorporated into the analysis. This study was focused on the analysis of dynamic responses by transfer function method in the condenser. Block diagrams were made through analytic transfer function, and dynamic responses are evaluated on Bode diagrams in the frequency response. These results may be used for determining an optimum design parameters in an actual component and total systems. Also, the mathematical models, frequency response and steady state response may be used to increase understanding, to obtain useful information for its commercialization, to evaluate the hardware and the optimum design parameters, the design control system and to determine the best controller setting for the refrigeration and air conditioning systems.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.93-96
• /
• 2000

In this paper, we suggest a feature points selection method using block-based watershed segmentation and polygon approximation for preprocessing of MPEG-4 mesh generation. 2D natural image is segmented by 8$\times$8 or 4$\times$4 block classification method and watershed algorithm. As this result, pixels on the watershed lines represent scene's interior feature and this lines are shapes of closed contour. Continuous pixels on the watershed lines are selected out feature points using Polygon approximation and post processing.

• Journal of ILASS-Korea
• /
• v.27 no.3
• /
• pp.155-160
• /
• 2022

Recently, major developed countries have strengthened automobile fuel efficiency regulations and carbon dioxide emission allowance standards to curb climate change caused by global warming worldwide. Accordingly, research and manufacturing on electric vehicles that do not emit pollutants during actual driving on the road are being conducted. Several automobile companies are producing and testing electric vehicles to commercialize them, but it takes a lot of manpower and time to test and evaluate mass-produced electric vehicles with driving mileage of more than 300km on a per-charge. Therefore, in order to reduce this, a simulation model was developed in this study. This study used vehicle information and MCT speed profile of small electric vehicle as basic data. It was developed by applying Simulink, which models the system in a block diagram method using MATLAB software. Based on the vehicle dynamics, the simulation model consisted of major components of electric vehicles such as motor, battery, wheel/tire, brake, and acceleration. Through the development model, the amount of change in battery SOC and the mileage during driving were calculated. For verification, battery SOC data and vehicle speed data were compared and analyzed using CAN communication during the chassis dynamometer test. In addition, the reliability of the simulation model was confirmed through an analysis of the correlation between the result data and the data acquired through CAN communication.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.301-302
• /
• 2024

본 논문은 웹 3.0 환경을 적용한 쇼핑몰 플랫폼의 구축을 목표로 하며, 이를 통해 참여자들이 블록체인 기술을 이해하고 활용할 수 있도록 하는 것을 중점으로 한다. MetaMask[1] 결제 및 로그인 통합을 통해 사용자는 간편하게 결제하거나 로그인할 수 있으며, 블록체인 스마트컨트랙트를 기반으로한 결제 시스템을 도입하여 높은 수준의 보안을 제공한다. 또한, 웹 3.0 기술을 도입하여 분산형 데이터 저장 방식을 채택하여 차별성을 확보한다. 이 프로젝트는 기존 쇼핑몰의 효율성을 높이고 사용자들에게 현대 기술 트렌드를 체험하게 함으로써 웹 3.0 시대에 걸맞은 차별화된 서비스를 제공하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1203-1212
• /
• 1994

This paper proposes a variable block size vector quantization based on a biorthogonal wavelet transform for image compression. An image is first decomposed with the biorthogonal wavelet transform into multiresolution image and the wavelet coefficients of the middle frequency bands are segmented using the quadtree sturcture to extract the perceptually important regions in the middle frequency bands. A sedges of middle frequency bands exist the corresponding position of high frequency bands, the complicated quadtree structure of middle frequency bands is equally applied to the high frequency bands. Therefore the overhaed information of the quadtree codes needed to segment the high frequency bands can be reduced. The segmented subblocks are encoded with the codebook designed at the each scales and directions. The simulation results showed that the proposed methods could reproduce higher quality image with bit rate reduced about 20(%) than of the preceding VQ method and sufficiently reduce the bolck effect and the edge degradation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1939-1947
• /
• 1999

This paper proposes new line code BIM (Bit Insertion and Manipulation) that is designed to overcome the problems of existing line codes. The block code, one of typical existing line code, has good transmission performance but difficulty in implementation. The other typical existing line code, bit insertion code, is easy to implementation but has bad transmission performance. BIM code in this paper could provide not only good performance but also provides simplicity in the implementation by combining the good points of block code into it of bit insertion code properly. In this paper, 5B6B type BIM code is designed. Designed 5B6B BIM code shows good transmission performance such $\pm$2 DSV, 0 RSD, 7 maximum run length and also it can be implemented under 2000 gates and need only 1 bit redundancy.

• Journal of Intelligence and Information Systems
• /
• v.9 no.3
• /
• pp.65-79
• /
• 2003

In general, the extraction and recognition of identifier is very hard work, because the scale or location of identifier is not fixed-form. And, because the provided image is contained by camera, it has some noises. In this paper, we propose methods for automatic detecting edge using canny edge mask. After detecting edges, we extract regions of identifier by detected edge information's. In regions of identifier, we extract each identifier using contour tracking algorithm. The self-generation supervised learning algorithm is proposed for recognizing them, which has the algorithm of combining the enhanced ART1 and the supervised teaming method. The proposed method has applied to the container images. The extraction rate of identifier obtained by using contour tracking algorithm showed better results than that from the histogram method. Furthermore, the recognition rate of the self-generation supervised teaming method based on enhanced ART1 was improved much more than that of the self-generation supervised learning method based conventional ART1.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.147-152
• /
• 2014

A longitudinal modal transmission-line theory(L-MTLT) to analyze the static and dynamic behavior of two-section distributed feedback (DFB) lasers is used. The characteristic impedance and equivalent propagation constant of DFB structure with active layer are derived from L-MTLT. A two-section DFB laser is analogous to a transmission-line network, in which each section is described by transmission-line block corresponding to the equivalent factors. The longitudinal resonant condition of DFB laser based on equivalent transmission-line network is used to reformulate the rate equations so that static and dynamic behavior of two-section DFB lasers with active layer is demonstrated and analyzed accurately.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.211-213
• /
• 2010

본 논문에서는 형태학적 처리 방법과 8 방향 윤곽선 추적을 이용하여 손금을 추출하는 방법을 제안한다. YCbCr컬러 공간에서 Y:65~255, Cb:25~255, Cr:130~255에 해당되는 피부색 임계치를 이용하여 손 영역을 추출한다. 추출된 손 영역에서 내부 픽셀의 3:1 이상, 전체 영상의 2:1이상인 손의 형태학적 정보와 8 방향 윤곽선 추적 기법을 이용하여 잡음을 제거한다. 잡음이 제거된 손 영상에서 스트레칭 기법과 소벨 마스크를 이용하여 에지를 추출한다. 추출된 에지 영상에서 블록 이진화 기법을 이용하여 이진화한 후에 가로와 세로가 각각 10픽셀 이상이고 20픽셀 이하인 손금의 형태학적 정보를 이용하여 잡음 및 손의 윤곽선을 제외한 손금을 추출한다. 추출된 손금에서 Labeling 기법을 이용하여 개별 손금의 중요선을 추출한다. 핸드폰 카메라에서 획득한 손바닥 영상을 대상으로 실험한 결과, 제안된 방법이 손금 추출에 효율적인 것을 확인할 수 있었다.

• Applied Chemistry for Engineering
• /
• v.32 no.5
• /
• pp.569-573
• /
• 2021

In this study, high-density carbon blocks were manufactured using coke, binder pitch, and impregnated pitch, then the effect of pitch fluidity on the densification of carbon blocks during the impregnation process was investigated. A green block was manufactured through high-pressure figuration of coke and binder pitch, and a carbon block was obtained through a heat treatment process. An impregnation process was performed to remove pores generated by volatilization of the binder pitch during the heat treatment process. The impregnation process was carried out the high-pressure reaction step of impregnating the pitch into the carbon block followed by the pretreatment step of melting the impregnation pitch. Melting of the impregnation pitch was carried out at 140~200 ℃, and the viscosity of the impregnation pitch decreased as the heat treatment temperature increased. The decrease in the viscosity of the impregnation pitch improved the fluidity and effectively impregnated the pores inside the carbon block, reducing the porosity of the carbon block by 83% and increasing the apparent density by 5%.