• Title/Summary/Keyword: 붕소

Search Result 487, Processing Time 0.022 seconds

An In-silico Simulation Study on Size-dependent Electroelastic Properties of Hexagonal Boron Nitride Nanotubes (인실리코 해석을 통한 단일벽 질화붕소 나노튜브의 크기 변화에 따른 압전탄성 거동 예측연구)

  • Jaewon Lee;Seunghwa Yang
    • Composites Research
    • /
    • v.37 no.2
    • /
    • pp.132-138
    • /
    • 2024
  • In this study, a molecular dynamics simulation study was performed to investigate the size-dependent electroelastic properties of single-walled boron nitride nanotubes(BNNT). To describe the elasticity and polarization of BNNT under mechanical loading, the Tersoff potential model and rigid ion approximation were adopted. For the prediction of piezoelectric constants and Young's modulus of BNNTs, piezoelectric constitutive equations based on the Maxwell's equation were used to calculate the strain-electric displacement and strain-stress relationships. It was found that the piezoelectric constants of BNNTs gradually decreases as the radius of the tubes increases showing a nonnegligible size effect. On the other hand, the elastic constants of the BNNTs showed opposites trends according to the equivalent geometrical assumption of the tubular structures. To establish the structure-property relationships, localized configurational change of the primarily bonded B-N bonded topology was investigated in detail to elucidate the BNNT curvature dependent elasticity.

Effect of hydrogen addition on the compressive residual stress of cubic boron nitride film (입방정 질화붕소 박막의 압축잔류응력에 미치는 수소첨가 효과)

  • Park, Jong-Geuk;Baek, Yeong-Jun;Lee, Uk-Seong
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2013.05a
    • /
    • pp.46-47
    • /
    • 2013
  • 다이아몬드와 같은 $sp^3$ 결합을 가지며, 다이아몬드 다음으로 경도가 강한 입방정 질화붕소(cBN)는 철계금속가공에의 적합성 및 낮은 증착온도로 인하여 표면 코팅소재로의 응용이 크게 기대되어 왔다. 그러나 증착시 cBN 상의 핵생성 이전에 필연적으로 증착되는 비정질 질화붕소(aBN) 및 육방정 질화붕소(hBN) 층의 대기 하에서의 불안정성 그리고 cBN 상의 증착에 수반되는 높은 압축 잔류응력으로 인해 모재와의 밀착력이 낮아지는 문제점 등으로 인해 응용이 크게 제한되어져 왔다. 본 발표에서는 아르곤(Ar)과 질소($N_2$)를 반응가스로 이용하여 스퍼터링법으로 증착한 질화붕소에서 발생하는 높은 잔류응력의 원인과 이를 낮추기 위해 반응가스에 첨가한 수소의 효과에 대해서 상세히 고찰해 보고자 한다.

  • PDF

Relation between Metamorphic P-T Conditions and Boron Concentrations of Metasedimentary Rocks and Biotite Granitic Gneisses from NE Yeongnam Massif around Samcheok Area, South Korea (영남 육괴 북동부 변성퇴적암과 흑운모 화강편마암의 변성 온도-압력 조건과 전압 붕소 함량사이의 상관관계)

  • Cheong, Won-Seok;Sun, Gwang-Min;Na, Ki-Chang
    • Economic and Environmental Geology
    • /
    • v.42 no.3
    • /
    • pp.247-259
    • /
    • 2009
  • This study is focused on the relationship between whole rock boron contents and metamorphic P-T conditions of metasedimentary rocks from northeastern Yeongnam massif around Samcheok area, Korea. Metamorphic P-T conditions of sillimanite and garnet zones based on the Ti-biotite geothermometer is 553-687$^{\circ}C$ and 582-722$^{\circ}C$ at 4-6 kbar, respectively. In the metasedimentary rocks, boron contents in whole rock decrease with increasing metamorphic grade, from sillimanite zone (9.60-189 ppm B) to garnet zone (2.63-15.97 ppm B), except one sample (90.9 ppm B) from garnet zone containing graphites. Boron depletion in garnet zone has relation with mode of tourmaline which are broken down with increasing metamorphic temperature. Boron contents are indirectly proportional to major and trace elements such as $Al_2O_3$, MgO, $Fe_2O_3$, $K_2O$, Li, Ba, Sc, Co, Cr, Rb and Cs that are abundant in tourmalines. In conclustion, tourmalines and graphite are modulator of boron contents in metasedimentary rocks. In the biotite granitic gneisses, boron contents (2.62-12.2 ppm B) are similar or lower than those of metasedimentary rocks and have no relation with metamorphic P-T conditions.

전자선 직접묘사에 의한 Deep Submicron $p^+$Poly pMOSFET 제작 및 특성

  • Kim, Cheon-Su;Lee, Jin-Ho;Yun, Chang-Ju;Choi, Sang-Soo;Kim, Dae-Yong
    • ETRI Journal
    • /
    • v.14 no.1
    • /
    • pp.40-51
    • /
    • 1992
  • $0.25{\mu} m$ 급 pMOSFET소자를 구현하기 위해, $P^+$ 폴리실리콘을 적용한 pMOS를 제작하였으며, $p^+$ 폴리실리콘 게이트 소자에서 심각하게 문제가 되고 있는 붕소이온 침투현상을 조사하고 붕소이온 침투가 일어나지 않는 최적열처리온도를 조사하였다. 소자제조 공정중 게이트 공정만 전자선 (EBML300)을 이용하여 직접묘사하고 그 이외의 공정은 stepper(gline) 을 사용하는 Mix & Match 방법을 사용하였다. 또한 붕소이온 침투현상을 억제하기 위한 한가지 예로서, 실리콘산화막과 실리콘질화막을 적층한 ONO(Oxide/Nitride/Oxide) 구조를 게이트 유전체로 적용한 소자를 제작하여 그 가능성을 조사하였다. 그 결과 $850^{\circ}C$의 온도와 $N_2$ 분위기에서 30분동안 열처리 하였을 경우, 붕소이온의 침투현상이 일어나지 않음을 SIMS(Secondary Ion Mass Spectrometer) 분석 및 C-V(Capacitance-Voltage) 측정으로 확인할 수 있었으며 그 이상의 온도에서는 붕소이온이 침투되어 flat band전압(Vfb)을 변화시킴을 알았다. 6nm의 얇은 게이트 산화막 및 $0.1{\mu} m$ 이하의 LDD(Lightly Doped Drain) $p^-$의 얇은 접합을 형성함으로써 소자의 채널길이가 $0.2 {\mu} m$까지 짧은 채널효과가 거의 없는 소자제작이 가능하였으며, 전류구동능력은 $0.26\muA$/$\mu$m(L=0.2$\mu$m, V$_DS$=2.5V)이었고, subthreshold 기울기는 89-85mV/dec.를 얻었다. 붕소이온의 침투현상을 억제하기 위한 한가지 방법으로 ONO 유전체를 소자에 적용한 결과, $900^{\circ}C$에서 30분의 열처리조건에서도 붕소이온 침투현상이 일어나지 않음으로 미루어 , $SiO_2$ 게이트 유전체보다 ONO 게이트 유전체가 boron 침투에 대해서 좋은 장벽 역활을 함을 알았다. ONO 게이트 유전체를 적용한 소자의 경우, subthreshold특성은 84mV/dec로서 좋은 turn on,off 특성을 얻었으나, ONO 게이트 유전체는 막자체의 누설전류와 실리콘과 유전체 계면의 고정전하량인 Qss의 양이 공정조건에 따라 변화가 심해서 문턱전압 조절이 어려워 소자적용시 문제가 된다. 최근 바닥 산화막(bottom oxide) 두께가 최적화된 ONO 게이트 유전체에 대하 연구가 활발히 진행됨을 미루어, 바닥 산화막 최적화가 된다면 더 좋은 결과가 예상된다.

  • PDF

Spectrophotometric Determination of Traces of Boron in Semiconductor-grade Trichlorosilane (반도체급 삼염화실란중의 극미량 붕소의 분광 광도법적 측정)

  • Dong Kwon Kim;Hee Young Kim
    • Journal of the Korean Chemical Society
    • /
    • v.35 no.5
    • /
    • pp.534-538
    • /
    • 1991
  • A procedure for spectrophotometric determination of traces of boron in high-purity trichlorosilane (TCS) is proposed utilizing an adsorptive separation. NaCl is chosen as an Lewis base adsorbent which forms a complex with boron compounds in TCS, and is well dissolved in sulfuric acid-quinalizarin color-forming agent without causing an interference in colorimetric measurements. The proposed adsorptive separation method is free from the formation of silica gel and gas bubbles during the analysis of TCS. The method reveals that the boron concentration in a semiconductor grade TCS is 6.1 ${\mu}$g/l within the standard deviation of ${\pm}$20%. On the other hand, the boron concentration of the purified TCS which is separated from NaCl-boron compounds complex is reduced to 0.2 ${\mu}$g/l, showing the efficient applicability of NaCl to the adsorptive separation. The effectiveness of NaCl for the removal of boron in TCS purification is also described in comparison with other well-known adsorbents.

  • PDF

Effects of Boron Application on the Outbreak of Granville wilt in Flue-cured Tobacco (붕소시용에 잎담배입고병발생에 미치는 영향)

  • Lee J.D.;Ban Y.S.;Yu I.S.
    • Korean journal of applied entomology
    • /
    • v.21 no.2 s.51
    • /
    • pp.73-77
    • /
    • 1982
  • This experiment was carried out to study the effect of boron application on the physiological response and the outbreak of Granville wilt flue-cured tobacco. NC2326 and Coker 86(flue-cured tobacco) were transplante dand investigated in all field culture plots for this experiment. Elongation of shoots were retarded, and stem heights were shortened in all boron applied plots and the more boron applied, the greater these tendency was. The ratio of root branching and root discoloration, and contraction by Granville wilt were docreased markedly in boron plots. Amount of harvested loaves (yield) was increased greatly in 2 and 4kg plots of borax and boric acid per 10a, and the increasing tendency was greater in NC2326 variety than Coker 86. Phenol compounds content in harvested leaves were higher in boron applied plots than non-applied, and was higher in Coker 86, Granville wilt resistant variety, than NC2326. The more boron applied, the higher nicotine content in the harvested leaves was.

  • PDF

Mechanical Properties and Neutron Shielding Performance of Concrete with Amorphous Boron Steel Fiber (비정질 붕소강 섬유를 혼입한 콘크리트의 역학적 성능 및 중성자 차폐성능 평가)

  • Lee, Jun Cheol;Kim, Wha Jung
    • Journal of the Korea Institute of Building Construction
    • /
    • v.17 no.1
    • /
    • pp.9-14
    • /
    • 2017
  • Mechanical properties and neutron shielding performance of concrete with amorphous boron steel fiber have been investigated in this study. The measurement of this investigation includes air contents, slump loss, compressive strength, flexural strength, flexural toughness and neutron shielding rate. Four different fiber volume fractions were selected ranging from 0.25% to 1.0% by volume for the amorphous boron steel fibers. The testing results showed that the flexural toughness and the neutron shielding rate were increase with the increase of volume fraction for amorphous boron steel fiber. Based on the result, it is concluded that the concrete with the amorphous boron steel fiber can be effectively applied to shield the neutron and to improve mechanical properties.

Influence of pH and Ionic Strength on Treatment of Radioactive Boric Acid Wastes by Forward Osmosis Membrane (정삼투막에 의한 붕산함유 방사성 폐액 처리를 위한 pH 및 이온강도 영향)

  • Choi, Hye-Min;Hwang, Doo-Seong;Lee, Kune-Woo;Moon, Jei-Kwon
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.11 no.3
    • /
    • pp.193-198
    • /
    • 2013
  • In general, boron recovery of 40-90% could be achieved by Reverse Osmosis (RO) membranes in neutral pH condition. As an emerging technology, Forward Osmosis (FO) membrane has attracted growing interest in wastewater treatment and desalination. The objective of this study is to evaluate the possibility of the boron removal in radioactive liquid waste by FO. In this study, the performance of FO was investigated to remove boron in the simulated liquid waste as the factors such as pH, osmotic pressure, ionic strength of solution, etc. The pH of feed solution is a major operating parameter which strongly influences to the permeation of boron and more than 80% of boron content can be separated when conducted at pH values less than 7. The water flux is not influenced but the boron flux and permeation rate tends to decrease in the low salt concentration of 1,000 mg/L. The boron flux increases linearly, but the permeation ratio of reducing boron is nearly constant even with changes in the draw solution concentration.

Survey of Borate deposit in Northern Argentina: Salinas Grandes Borate deposit (북부 아르헨티나 붕산염 광상 조사: 살리나스그란데스 광상을 중심으로)

  • Pak, Sang-Joon; Lee, Han-Yeang
    • Journal of the Korean earth science society
    • /
    • v.30 no.7
    • /
    • pp.801-809
    • /
    • 2009
  • The Salinas Grandes borate deposit located in Jujuy state, northern Argentina can be categorized into the playatype evaporite deposit. Major borate mineral is ulexite ($NaCaB_5O_9{\cdot}H_2O$), which boron could be originated from volcanic rocks nearby playa. The eastern part of the Jujuy state in northern Argentina belongs to the Altiplano-Puna platform which shows high altitude and semiarid climate. Lots of Mesozoic and Cenozoic volcanics that are source of boron as well as playas that are the basin for borate precipitation in the area are essential for boron evaporite deposit. Therefore, the extensive explorations for the playa-type evaporite deposit are need.

Mechanical Properties and Neutron Shielding Rate of Concrete with Borosilicate-Glasses and Amorphous Boron Steel Fiber (붕규산유리 및 비정질 붕소강 섬유를 혼입한 콘크리트의 역학적 성능 및 중성자 차폐성능 평가)

  • Lee, Jun-Cheol
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.4 no.3
    • /
    • pp.269-275
    • /
    • 2016
  • In this study, the mechanical properties and the neutron shielding rate of concrete with the borosilicate glass and the amorphous boron steel fiber were investigated. The measures of this investigation includes air contents, slump loss, compressive strength, static modulus of elasticity, compressive toughness, flexural strength, flexure toughness and neutron shielding rate. As a result, the neutron shielding rate of the concrete with borosilicate glasses increased even though the compressive strength and flexural strength decreased in comparison with that of plain concrete. Also, the mechanical toughness and the neutron shielding rate of the concrete with amorphous boron steel fiber increased in comparison with that of plain concrete.