• Journal of Sericultural and Entomological Science
• /
• v.37 no.2
• /
• pp.99-108
• /
• 1995

The experiment was carried out to define the effect of the boron in nutrient solution on the development of mulberry root and cold damage. The length of shoots only attained about 50cm and then stopped in case of boron deficiency, while the mulberry trees developed vigorous and attained over 190cm long under boron supply condition. When boron is deficient, the measles appeared on surface of the stem and the necrosis appeared on the petiole, midribs and veins of leaves. At 70 days after planting, almost all new roots and old roots changed to brown, the lateral roots became necrosis by boron deficiency. After three days of stopping boron supply, many new roots changed to brown and after two days of boron resupply, new roots began to grow out and then new roots normally developed. Content of boron in leaves and barks increased by the increase of boron concentration in nutrient solution and maximum boron content in leaves and barks was obtained with boron-sufficient treatment of 0.5ppm. Treatment of 0.5ppm boron supply indicated that the leaves and barks contained more phospholipid, protein, sugar, RNA and proline than treatment of 0.01ppm boron supply in nutrient solution. The cuttings grown in boron supply nutrition have a sufficient tolerance at -10$^{\circ}C$ and -15$^{\circ}C$ for 24 hours while cuttings grown in boron-deficient nutrition have a weak tolerance at the same condition. As mentioned above, we can conclude that the effect of boron deficiency on root development is much severe and the relationship between the lack of boron and cold damage is very closely related.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.1
• /
• pp.76-80
• /
• 1983

In order to investigate the effect of boron and phosphorus for reduction of cold injury of rice, this experiment was undertaken by pot trial. Two levels of phosphorus and 6 levels of boron were applied once at the three stages such as tillering, panicle formation and meiosis stage. Cold water was irrigated to maintain cool temperature ranging 15 to $18^{\circ}C$ from panicle formation stage. It was shown a tendency that three to seven days of early heading were resulted by the 3, 5 and 10kg of boron application per 10 are. The ripening ratio and physiological root activity was rather slightly increased in the above boron levels.

• Economic and Environmental Geology
• /
• v.47 no.5
• /
• pp.541-549
• /
• 2014

The annual borate production in Turkey is about 3 million tons, which occupies approximately 61 percent of total annual world production. Turkey has five boron deposits including Bigadic, Emet, Kestelek, Kirka, and Sultancayir. At present, Bigadic, Emet, and Kirka deposits are operating. Kirka boron deposit is distributed within volcanoclatic sedimentary group as mainly layered, rarely brecciated and massive types. Major borate is borax associated with colemanite and ulexite. They show a horizontal symmetrical zonation from Na borate (borax) in the center of deposit to Na-Ca borate (ulexite) and Ca-borate (colemanite) in margin. Bigadic boron deposit is known as the largest colemanite deposit in the world. This deposit occurs as two borate bearing horizons in Miocene volcanoclastic sedimentary group. Thickness ranges from several meters to 100 meter with a length of several hundreds meters. Borate ore bodies which are mainly composed of colemanite and ulexite are alternated with claystone, mudstone, tuff and layered limestone as lenticular shape. Sultancayir boron deposit is mainly distributed within gray limestone. Main borate minerals of this deposit are pandermite and ulexite. Pandermite and ulexite occur as colloform aggregate and small veinlet, respectively. Turkish boron deposits are evaporite deposit which were formed in Miocene playa-lake environment. Boron was supplied to the deposits by the volcanic and hydrothermal activities.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.605-605
• /
• 2013

고온플라즈마 시스템을 이용하여 BCl3와 CH4 전구체 기체를 고온 플라즈마 영역으로 분사하여 고온에서 분해시킨 후, 기체상 응핵 및 성장과정을 통하여 붕소 카바이드 입자를 제조하였다. XPS를 이용하여 붕소 카바이드와 관련된 B-C 결합 구조 내의 붕소와 탄소의 원자 비율을 측정 및 분석하였다. 실험 시 BCl3는 20~40 sccm와 CH4는 10~60 sccm의 범위 안에서 유량이 조절되었으며, BCl3/CH4의 비는 0.67-4의 범위에 있었다. 이러한 실험조건에서 얻어진 붕소카바이드 나노입자의 B/C의 최대 값은 2.13이었다. 이를 바탕으로 고온플라즈마 시스템 내에서 붕소카바이드 입자의 형성과정에 대해 논하였다.

• Applied Biological Chemistry
• /
• v.2
• /
• pp.5-7
• /
• 1961

근년(近年) 경기도(京畿道)및 충청남북도(忠淸南北道) 일부지방(一部地方)에 ‘벌보리’ (대맥불임중(大麥不稔症)의 발생(發生)이 알려졌고 4293년(年) 봄에는 본장(本場)의 신개간지(新開墾地)에서도 不稔麥이 생겼으므로 이 토양(土壤)을 공시(供試)하여 석회(石灰)를 시용(施用)하고 붕소(硼素)와 용성인비(熔性燐肥), 퇴비(堆肥) 및 저니토등(底泥土等)을 시용(施用)하여 시험(試驗)을 실시(實施)하였다. 한편 같은 현상(現狀)이 산성(産生)된 충청북도(忠淸北道) 농사원(農事院) 의 원내포장(院內圃場) 석회전시(石灰展示) 포적지(圃跡地)에서 이의 방제(防除)를 시도(試圖)코 붕소(硼素)를 대맥생육중(大麥生育中)에 엽면시비(葉面施肥)하여 좋은 결과(結果)를 얻었다. 여기서는 이들 처리(處理)로 얻어진 임실도(稔實度)와 맥간중(麥桿中)의 붕소량(硼素量)을 조사분석(調査分析)하였고 그 결과(結果)는 다음과 같다. 1. 붕소(硼素)의 토양시용(土壤施用)은 추파대맥(秋播大麥)의 총생(叢生)을 억제(抑制)할 뿐만아니라 인실도증가(引實度增加)에 유효(有效)하였으며 붕소(硼素)의 엽면시비(葉面施肥)도 대맥붕실도(大麥硼實度)를 증가(增加)시켰다. 2. 부임도(不稔度)가 높은 각구(各區)의 식물체중(植物體中) 붕소함량(硼素含量)은 1ppm내외(內外)였으며 임실(稔實)이 잘된 붕소구(硼素區)에서는 10mm이였다. 그러나 시용(施用)한 붕소량(硼素量)은 대맥(大麥)의 생육기간중(生育期間中), 엽면(葉面)에 흑색반점(黑色斑點)이 나타날 정도(程度)의 과량(過量)이었다. 붕소(硼素)의 엽면시비(葉面施肥)는 상기(上記)와 같은 현상(現象)이 나타나지 않았으며 붕소함량(硼素含量)은 3.5ppm이였다.

• 농업기술회보
• /
• v.48 no.4
• /
• pp.42-42
• /
• 2011

감귤재배 시 반드시 필요로 하는 양분 중의 하나인 붕소는 잎에서 광합성 작용으로 만들어진 당분을 과실, 뿌리 및 줄기 등으로 이동하도록 돕는다. 하지만 적은 양으로 민감하게 피해현상이 발생하므로 일반 온주밀감재배에는 붕소를 별도로 거의 시용하지 않았다. 그러나 최근 신품종이 보급되면서 특이 품종에서 붕소의 결핍증상이 쉽게 나타나고 있어 이에 대한 사례와 결핍 시 방지대책과 과잉으로 사용 시 나타나는 피해증상을 조사했다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.4
• /
• pp.272-277
• /
• 1991

To investigate changes of boron fractions in soil with vegetable cultivation affected by boron application Jossangmiho, chinese cabbage was planted in 1/2.000a pot with four different soils which are sandy loam, calcareous, organic and vinyl house soil. Increment of available boron in soil with different boron applications was in the order of vinyl hous soil>organic soil>sandy soil>calcareous soil. The ratio of boron fraction to total boron is highest in $NH_4$-oxalate ext.-B with 19.1 % and lowest in water sol.-B and $CaCl_2$ ext.-B with 0.7% respectively. The boron fraction increment due to the different application ratio was in the order of $NH_4-oxalate$ ext.-B>Mannitol exch.-B> $CaCl_2$ ext.-B> $NH_2OH{\cdpt}HCl$ ext.-B>Water soil.-B. As the concentration of calcium in soil increased. water sol.-B decreased and the other forms of boron increased. In the soil high in organic matter, water sol.-B and $NH_4$-oxalate ext.-B increased significantly. but the other forms of boron not.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.32.1-32.1
• /
• 2011

39 K의 임계온도를 갖는 $MgB_2$ 초전도체를 이용한 전력에너지와 MRI 의료 기기로의 응용 가능성이 높아지고 있다. $MgB_2$ 초전도체 제조에 있어서 마그네슘과 반응성이 좋은 비정질의 붕소 원료 분말 가격이 비싼 반면 상대적으로 경제적인 결정질 분말의 기계적 밀링 공정을 이용하여 비정질화와 나노 입자로의 크기 감소 효과를 얻을 수 있다. 또한 탄소를 이용한 붕소 치환으로부터 고 자기장하에서 초전도 임계 성질을 향상시키고자 유, 무기물 형태의 여러 가지 탄소 소스를 개발하는 연구가 진행되어 왔다. 본 연구에서는 저가의 95~97% 순도, 약 1 ${\mu}m$ 이하 크기를 갖는 준결정상의 붕소 분말을 이용하여 기계적 밀링에 따른 붕소 분말의 비정질화 및 입자 나노화, $MgB_2$ 반응성 향상, $MgB_2$ 결정립 크기 감소 및 결정립계 피닝 증가에 의한 초전도 임계 물성 향상에 대하여 알아보았다. 또한 여러 시간 동안 밀링된 각 붕소 분말에 액체 글리세린을 이용한 탄소 도핑 전처리를 통하여 밀링 시간의 최적화를 알아보았고 이로부터 제조된 $MgB_2$ 초전도 벌크의 경우 적절한 임계온도 감소, 격자 왜곡 결함과 높은 결정립계 밀도 등에 의한 플럭스 피닝 향상으로 $MgB_2$ 초전도체의 임계전류밀도 및 비가역자기장이 증가함을 알 수 있었다. 즉, 경제성 있는 저급의 준결정상을 갖는 붕소 원료 분말의 입자 비정질 나노화 및 탄소 도핑 전처리를 통하여 $MgB_2$ 초전도 임계 물성을 향상시킬 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.812-818
• /
• 2004

This study has been undertaken with objective of studying the mechanism and condition of formation of hexagonal boron nitride from reduction of boric okide in the presence of carbon under nitrogen atmosphere. It was found that the formation of hexagonal boron nitride was started at 1400$^{\circ}C$ and almost completed its conversion at 1550$^{\circ}C$. The morphology of boron nitride synthesized in this study was very fine and platelet. It was considered as reaction pathway of hexagonal boron nitride that boron oxide was reduced to born and evaporated by activated carbon, and then it was reacted with nitrogen.

• Resources Recycling
• /
• v.25 no.4
• /
• pp.3-10
• /
• 2016

A lot of researches have been carried out on the recovery of resources from the seawater all over the world. The boron concentration in seawater is low about at 4.5ppm, but considering the volume of seawater, the total weight of dissolved boron amounts to about 5.4 trillion tons. The boron is an essential resource in about 300 kinds of industries. Korea has imported all of the boron and spent more than 700 billion won each year. In this article, we introduce the domestic and international research trends and technologies for removing or recovering the boron from wastewater and seawater. Most of the researches have been conducted to remove the boron from the desalination process, and to recover the boron mainly from wastewater and brine. The technique for the recovery of the dissolved boron includes the ion exchange, which is the most representative, the adsorption membrane filtration (AMF), solvent extraction, and so on.