• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.185-192
• /
• 2017

A sequence of earthquakes with the main shock $M_L$ 5.8 occurred on September 12 2016 in the Gyeongju area. The main shock was the largest earthquakes in the southern part of the Korean peninsula since the instrumental seismic observation began in the peninsula in 1905 and clearly demonstrated that the Yangsan fault is seismically active. The mean focal depth of the foreshock, main shock, and aftershock of the Gyeongju earthquakes estimated by the crustal model of single layer of the Korean peninsula without the Conrad discontinuity turns out to be 12.9 km, which is 2.8 km lower than that estimated based on the IASP91 reference model with the Conrad discontinuity. The distribution of the historical and instrumental earthquakes in the Gyeongju area indicates that the Yangsan fault system comprising the main Yangsan fault and its subsidiary faults is a large fracture zone. The epicenters of the Gyeongju earthquakes show that a few faults of the Yangsan fault system are involved in the release of the strain energy accumulated in the area. That the major earthquakes of Gyeongju earthquakes occurred not on the surface but below 10 km depth suggests the necessity of the study of the distribution of deep active faults of the Yangsan fault system. The magnitude of maximum earthquake of the Gyeongju area estimated based on the earthquake data of the area turns out to be 7.3. The recurrence intervals of the earthquakes over magnitudes 5.0, 6.0 and 7.0 based on the earthquake data since 1978, which is the most complete data in the peninsula, are estimated as 80, 670, and 5,900 years, respectively. The September 2016 Gyeongju earthquakes are basically intraplate earthquakes not related to the Great East Japan earthquake of March 11 2011 which is interplate earthquake.

• Geophysics and Geophysical Exploration
• /
• v.20 no.3
• /
• pp.176-184
• /
• 2017

To interpret the seismic image precisely, random noises should be suppressed and the continuity of the image should be enhanced by using the appropriate smoothing techniques. Structure-Oriented Filter-Edge Preserving (SOF-EP) technique is one of the methods, that have been actively researched and used until now, to efficiently smooth seismic data while preserving the continuity of signal. This technique is based on the principle that diffusion occurs from large amplitude to small one. In a continuous structure such as a horizontal layer, diffusion or smoothing is operated along the layer, thereby increasing the continuity of layers and eliminating random noise. In addition, diffusion or smoothing across boundaries at discontinuous structures such as faults can be avoided by employing the continuity decision factor. Accordingly, the precision of the smoothing technique can be improved. However, in the case of the structure-oriented semblance technique, which has been used to calculate the continuity factor, it takes lots of time depending on the size of the filter and data. In this study, we first implemented the SOF-EP method and confirmed its effectiveness by applying it step by step to the field data. Next, we proposed and applied the corner response method which can efficiently calculate the continuity decision factor instead of structure-oriented semblance. As a result, we could confirm that the computation time can be reduced by about 6,000 times or more by applying the corner response method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.373-379
• /
• 2020

This study performed stress and fatigue life analysis of the damping hinge of a built-in side-by-side refrigerator that occurs when the door is opened to the maximum angle. An analysis of the initial design showed that stress concentration occurred at the corner between the cylinder and upper disk of the bracket pin, and the maximum stress exceeded the yield strength. The maximum stress location and the calculated fatigue life were consistent with the door opening-and-closing endurance test results for a prototype. Three cases of design improvement for the bracket pin were derived with the aim of reducing the stress concentration that appeared in the initial design. An analysis of the cases showed that inserting a fillet between the disk and the cylinder of the bracket pin reduced the stress and increased the fatigue life. Moreover, changing the disk into two steps was more favorable. In conclusion, the best design improvement was the case that the disk was changed to two steps and the fillet with a large radius was inserted. In that case, the stress was the smallest and the fatigue life was infinite.

• Journal of Korea Water Resources Association
• /
• v.46 no.1
• /
• pp.59-71
• /
• 2013

The lack of sufficient flood data being kept across Korea has made it difficult to assess reliable estimates of the design flood while relatively sufficient rainfall data are available. In this regard, a rainfall simulation based derivation technique of flood frequency curve has been proposed in some of studies. The main issues in deriving the flood frequency curve is to develop the rainfall simulation model that is able to effectively reproduce extreme rainfall. Also the rainfall-runoff modeling that can convey uncertainties associated with model parameters needs to be developed. This study proposes a systematic approach to fully consider rainfallrunoff related uncertainties by coupling a piecewise Kernel-Pareto based multisite daily rainfall generation model and Bayesian HEC-1 model. The proposed model was applied to generate runoff ensemble at Daechung Dam watershed, and the flood frequency curve was successfully derived. It was confirmed that the proposed model is very promising in estimating design floods given a rigorous comparison with existing approaches.

• Journal of Wetlands Research
• /
• v.19 no.1
• /
• pp.45-51
• /
• 2017

Nepal is a landlocked mountainous country in South Asia, located between China to the north and India to the south, east, and west. As such, wastewater management has become one of the most significant problems in urban area of Nepal. In Nepal, the centralized wastewater treatment systems were dysfunctional due to high cost of operation, discontinuous power supply, lack of proper maintenance and proper technical workforce to address the issues. As such, constructed wetlands (CW) were applied to treat various secondary wastewater as alternative to wastewater treatment facilities. Generally, efficiency and sustainability of CW technology depends on proper operation and maintenance and active community involvement. This study summarizes information about 26 CW in Nepal. Specifically, factors including data banking, removal efficiency, quality of discharged water, compliance to water quality standard of Nepal and operation and maintenance were investigated. Considering removal efficiency per pollutant, Ka-1 achieved the greatest reduction for most pollutant followed by B-1, L-3, Ka-5 and K-1. Nepal has practiced CW technology for more than 2 decades but currently, development of technology was interrupted by the inefficient performance of existing facilities. Public awareness about the technology, natural disaster, unavailability of specified substrate materials, lack of fund for further research and experiments has hindered the expansion of technology. In spite of these concerns, CW was still proven as an alternative solution to the present wastewater problems in urban areas of Nepal.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.133-140
• /
• 2009

This paper presents the experimental study to analyze the pressure and production behavior using depressurization and thermal methods in order to evaluate the hydrate productivity in the 2-D multi-well, plate-type apparatus which has 80 md permeability and 30% hydrate saturation. Injecting methane gas through multi-well allowed to set up the highly saturated hydrate system and combining two different sorts of sands made possible to build up the low permeability system. In this system, both depressurization and electric stimulation methods were applied. When operating pressure was low, according to the depressurization experiments results, the gas recovery was high, however strong pulses which appeared at initial stage of production would damage the operation system. Moreover, cases that hydrate reformed have occurred by endothermic reaction. We have conducted experiments four and six times for the depressurization magnitudes of 140 psi and 320 psi, respectively, to analyze production behavior for the method more in detail. For the cases that the depressurization magnitude was set as 140 psi, the unstable period appears in the results, but stabilized soon. In the experiment results for 320 psi the discontinuous and intermittent behavior has been observed. Thermal stimulation experiments was conducted with depressurizing 80 psi which is the case that shows stable behavior and low recovery. In the results, the gas recovery was high and the energy efficiency was low for long stimulating time. The energy efficiency and gas recovery increased for the soaking time of 1 minute after 2 minute-preheating. In the cases of which the soaking time exceeds 1 minute, energy loss by long soaking time caused low gas recovery and poor energy efficiency.

• Smart Media Journal
• /
• v.1 no.3
• /
• pp.36-42
• /
• 2012

Recently, the smart applications, such as smart phone and smart TV, become a hot issue in IT consumer markets. In particular, the smart TV provides 3D video services, hence efficient coding methods for 3D video data are required. Three-dimensional (3D) video involves stereoscopic or multi-view images to provide depth experience through 3D display systems. Binocular cues are perceived by rendering proper viewpoint images obtained at slightly different view angles. Since the number of viewpoints of the multi-view video is limited, 3D display devices should generate arbitrary viewpoint images using available adjacent view images. In this paper, after we explain a view synthesis method briefly, we propose a new algorithm to compensate view synthesis errors around object boundaries. We describe a 3D warping technique exploiting the depth map for viewpoint shifting and a hole filling method using multi-view images. Then, we propose an algorithm to remove boundary noises that are generated due to mismatches of object edges in the color and depth images. The proposed method reduces annoying boundary noises near object edges by replacing erroneous textures with alternative textures from the other reference image. Using the proposed method, we can generate perceptually inproved images for 3D video systems.

• Journal of KIISE:Software and Applications
• /
• v.32 no.3
• /
• pp.181-191
• /
• 2005

This article describes a simplified mathematical model and the relevant numerical algorithm to simulate the draped cloth on virtual human body. The proposed algorithm incorporates an elliptical, or non-consecutive, method to simulate the cloth wrinkles on moving bodies without resorting to the result of the past time-steps of drape simulation. A global-local analysis technique was employed to decompose the drape of cloths into the global deformation and the local wrinkles that will be superposed linearly The global deformation is determined directly by the rotation and the translation of body parts to generate a wrinkle-free yet globally deformed shape of cloth. The local wrinkles are calculated by solving simple elliptical equations based on the orthogonality between conjugate harmonic functions representing the wrinkle amplitude and the direction of wrinkles. The proposed method requires no interpolative time frames even for discontinuous body postures. Standing away from the incremental approach of time integration in conventional methods, the proposed method yields a remarkable reduction of CPU time and an enhanced stability. Also, the transient motion of cloth could be achieved by interpolating between the deformations corresponding to each static posture.

• Journal of Labour Economics
• /
• v.24 no.2
• /
• pp.63-94
• /
• 2001

Based on the human capital theory, the wage differentials among laborers are generated from the discrepancy of human capital stock which depends on individual laborer's decision. Hence, the wage differentials among laborers or between male and female are not the results of discrimination, but the results of individual choice. But, if the individual choice for human capital stock would be affected by the male-female discrimination, the explanation for male-female wage differentials base on the human capital stock has a bias. Actually, women have experienced in the discrimination on labor market participation due to gravity, parturition, infant rearing. Also, it is a fact that women have been discriminated against men in labor market owing to social, traditional, and cultural discriminations. If woman or her parent will less invest on human capital than man owing to the existence of discrimination in labor market, the 'expected human capital stock' instead of human capital stock will explain male-female wage differentials better. Therefore, in this study, we set up three models; first model includes working hours, industry, occupation, etc which are in general used as explanatory variables for wage decision, second model includes the variables which reflect the traditional human capital stock together with the first model's explanatory variables, third model employes the 'expected human capital stock' instead of traditional human capital stock. From the empirical test, the estimates of discrimination in three models are .93, .60, and, .48 respectively. This result implies that the male-female wage differentials in Korea can be explained by the discrepancy of 'expected human capital stock'. Since the discrepancy in expected human capital stock depend on the disparity in life-cycle labor force participation, male-female wage differentials can largely be attributed to male-female disparity in expected lifetime labor force participation.

• Parasites, Hosts and Diseases
• /
• v.26 no.3
• /
• pp.155-162
• /
• 1988

Surface membrane proteins of virulent RH strain and tissue cyst-forming Fukaya strain of Toxoplasma gondii were analysed by SDS-polyacrylamide gel electrophoresis after LPO-catalyzed surface iodination and lectin blotting, then identified the zoite-specific antigens. Prior to the analyses, purification of RH tachyzoites from mouse peritoneal exudate and of Fukaya bradyzoites from mouse brain tissues were performed by centrifugation - on the discontinuous Percoll density-gradient. Ta- chysoites were obtained at the interface of 50U and 60% Percoll solution and brain cysts were harvested at the interfaces of 40-50% and 50-60%, then bradyzoites were obtained by treating the cysts with hypertonic solution. The LPO-catalyzed iodination detected 15 KDa and 14 KDa proteins o( brady- zoites and 30 KDa protein of tachysoites as major bands with several other minor bands. But Con A blotting revealed some bands of 200 K∼50 KDa glycoproteins of bradyzoites and 52 KDa band as major and minor bands of 33 K∼20 KDa of tachyzoites. Phytohemagglutinin did not detect any band in the two forms. EITB with anti- Fukaya antibody and anti-RH antibody revealed cross-reactivities between the two forms. Despite the cross-reactivity, anti-Fukaya antibody reacted with 15 KDa band of bradyzoites specifically and, anti-RH antibody with 52 KDa, 30 KDa, and 25 KDa bands of tachyzoites, respectively. It was identified that 15 KDa protein in bradyzoite, which was not a glycoprotein, was a major membrane protein with sufficient antigenicity, and in the case of tacky- zoite, 52 KDa surface glycoprotein (gp52) with specific antigenicity might be added to the major surface protein, p30.