• Proceedings of the KSEEG Conference
• /
• 2000.04a
• /
• pp.73-76
• /
• 2000

• The Journal of the Korean dental association
• /
• v.20 no.6 s.157
• /
• pp.525-535
• /
• 1982

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.730-737
• /
• 2010

It is very important to remove fluoride ion before treating semiconductor wastewater containing high concentration of ammonia, phosphates, and fluoride ions by struvite formation. Calcium ion was generally added for the removal of fluoride ion. However, calcium ions remained after removal of fluoride ion can deteriorate the performance of struvite crystalization. It should be removed completely before struvite formation. In this study, the effect of fluoride and calcium ion concentration on the struvite crystalization was investigated. Removal efficiencies of ortho-phosphate with struvite formation were more abruptly decreased than those of ammonium nitrogen, as increase of fluoride ion concentration in synthetic wastewater. The structures of struvite formed in synthetic wastewater containing calcium ion of up to 500 mg/L were identical. Purity of struvite was deteriorated as increase of calcium ion over 500 mg/L. Removal efficiencies of ammonium nitrogen were more decreased than those of phosphate ions as increase of cacium ion in synthetic wastewater.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.91-97
• /
• 2003

The effect of fluorination of nanoscaled silicas on mechanical interfacial properties and thermal stabilities of the silica/polyurethane composites was investigated. The surface properties of the silica were studied in X-ray photoelectron spectroscopy and contact angle measurements. Their mechanical interfacial properties and thermal stabilities of the composites were characterized by tearing energy and decomposition activation energy, respectively. As experimental results, the London dispersive component of surface free energy and fluorine functional groups of silica surfaces were increased as a function of fluorination temperature resulting in improving the trearing energy ($G_{IIIC}$) of the composites. Also, the thermal stabilities of the composites were increased as the treatment temperature increases. These results could be explained that the fluorine functional groups on silica surfaces played an important role in improving the intermolecular interactions at interfaces between silicas and polyurethane matrix in a composite system.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.457-463
• /
• 2014

In this study, the changes in the chemical structure and the physical property of fluoropolymer films (PTFE, FEP, PFA, PVDF, and ETFE) induced by $Co^{60}$ gamma ray in air, $N_2$, and vacuum environments were investigated. FTIR spectra of the irradiated fluoropolymers indicate that the oxidation proceeded by the reaction of radicals generated by irradiation with oxygen in air. The changes in the heat of fusion and the degree of crystallinity of the irradiated fluoropolymers were investigated using DSC and the results indicate that the scission and crosslinking reactions of the irradiated fluoropolymers were largely influenced by the chemical structure. It was also found that the mechanical property of the irradiated fluoropolymer films under an air atmosphere was significantly decreased.

• Membrane Journal
• /
• v.20 no.2
• /
• pp.106-112
• /
• 2010

This study deals with the surface fluorination of poly(phenylene oxide) (PPO) with the direct contact of 100 ppm fluorine gas. To characterize the surface fluorinated membranes, the contac angle measurement, X-ray photoelectron microscopy analysis and the gas permeation experiments were performed. As the fluorination time increases, the hydrophobicity of membrane surfaces is increased by the surface characterization. In general, as expected, the overall gas permeability was reduced. Typically, the permeability reduction of 33% for nitrogen, 23% for oxygen and 3% for carbon dioxide were observed when the membranes were exposed in 100 ppm environment for 60 min., meanwhile the selectivity was increased from 3.92 to 4.47 for $O_2/N_2$ and 18.09 to 25.4 for $O_2/N_2$, respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.3
• /
• pp.292-298
• /
• 2016

The aim of this study was to compare the compressive strength and amount of fluoride-release of recently developed giomers (Beautifil Flow Plus F00, Beautifil Flow Plus F03), conventional giomer, resin-modified glass ionomer and composite resin. Fifteen cylindrical specimens for each group were prepared to measure fluoride release. It was measured using pH/ISE meter and fluoride ion electrode every 24 hours for the first 7 days and every 72 hours until the 31st day. Also, fifteen cylindrical specimens for each group after thermocycling were prepared to measure compressive strength. The universal testing machine (Kyung-sung Testing Machine Co., Korea) was used and the crosshead speed was 1 mm/min. Recently developed giomers showed more fluoride release and higher compressive strength than conventional giomer. It would be a good alternative to composite resin.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.257-262
• /
• 2013

The fluorine-containing waste water tends to show a higher removal efficiency through the coagulative precipitation process with calcium. However the tetrafluoroborate produced from the etching process is difficult to remaval due to it's low reactivity with calcium. The objective of this study is improving the efficiency of fluoride ion removal in tetrafluoroborate through decomposing. Research on tetrafluoroborate decomposition depending on reaction pH, temperature, and aluminum dosage were conducted, using a laboratory-scale reactor. The result shows that the reaction of tetrafluoroborate with aluminum is faster with lower pH, higher water temperature, and higher Al/T-F (Aluminum/Total Fluoride) mole ratio. It is found that there was no big change in concentration after over 120 minutes of reaction. This study is to be able to improve the efficiency of tetrafluoroborate and fluoride wastewater treatment by using aluminum.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.473-480
• /
• 1996

Synthesis of n-perfluorooctanesulfonyl fluoride(n-PFOSF), which is valuable precursor perfluoro-chemicals, was studied by electrochemical fluorination(ECF). Of prime concern was to investigate the cyclic voltamograms of Ni electrode in anhydrous hydrogen fluoride(AHF) with and without the reactants and to measure fluorine evolution potential. In a batch cell, chronoampherometric electrolysis and various chemical analysis such as GC, GC/MS and IR were used to understand the amphere change of electrode and the reaction paths. Fluorine equilibrium potential was found to be about 2.8V(vs. $Cu/CuF_2$) from the cyclic voltammograms and decay curves of anode potential in AHF. In batch processes, the ECF proceeded in two distinguished steps. The first step proceeded electrochemically and the second one chemically. Under 7V(vs. $Cu/CuF_2$), amount of crude products was proportional to the applied anode potential. Above 7V(vs. $Cu/CuF_2$), it had a hundred percentage with weight ratio of reactants and productivity of PFOSF was almost constant.

• Polymer(Korea)
• /
• v.35 no.1
• /
• pp.47-51
• /
• 2011

In this study, illite, an environmental friendly, low cost, and high aspect ratio additive, was used to improve flame retardant property of epoxy and it was fluorinated to enhance dispersion of hydrophilic illite in hydrophobic epoxy by introducing hydrophobic functional groups. Fluorination of illite enhanced illite dispersion ill epoxy solution before curing and that in the complex after curing. These enhanced dispersions were attributed to the increased affinity of illite to hydrophobic epoxy solution induced by fluorination of illite and the increased intercalation of epoxy polymer or exfoliation of illite by epoxy curing. Hence, limited oxygen index(LOI) of fluorinated illite/epoxy complex increased by 24%, compared to that of epoxy, suggesting that the preparation of fluorinated illite/epoxy complex increased their flame retardant properties.