• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.35-43
• /
• 2010

We have developed a sodium fluoride containing gelatin and methyl cellulose gel. Cariostatic abilities of those gel were investigated and compared with APF gel and fluoride varnish($Cavityshield^{TM}$). We prepared the bovine tooth samples and divided into two surface, control side and experimental side in same specimen for exclusion of difference between specimens. The experiment was consisted of 4 groups : (I) APF gel : (II) $Cavityshield^{TM}$ : (III) Gelatin F gel : (IV) Methyl cellulose F gel Decalcification were produced by placing each specimen into artificial acidic solution(pH 4.0) for 72 hours. Surface microhardness were measured and depth of demineralization lesion were measured by polarizing light microscope. The results were as follows: 1. The difference of VHN between control and experimental side is smallest in group I (p<0.05). 2. The largest difference was shown in group II (p<0.05). 3. There were no significant difference between group III and IV in microhardness test (p>0.05). 4. The difference of lesion depth is smallest in group I (p<0.05). 5. There were no significant difference between group II, III and IV in lesion depth (p>0.05). The result of the present study indicate that the fluoride containing gelatin and methyl cellulose gel is more effective than APF gel and is similar to fluoride varnish application for prevention of demineralization.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.16-23
• /
• 2016

Purpose: The aim of this study was to evaluate whether fluorides at various pH cause changes in the surface roughness of titanium implants that alter the adherence of bacterial biofilms. Materials and Methods: The titanium disks were assigned randomly to the following seven groups according to the fluoride agents and application time (1 minute or 30 minute) used: control (no treatment); group 1 (1.23% acidulated phosphate fluoride [APF] at pH 3.5 for 1 minute); group 2 (1.23% APF at pH 3.5 for 30 minute); group 3 (1.23% APF at pH 4.0 for 1 minute); group 4 (1.23% APF at pH 4.0 for 30 minute); group 5 (2% NaF gel at pH 7.0 for 1 minute); group 6 (2% NaF gel at pH 7.0 for 30 minute). The surface roughness of the titanium disks and the amount of adherent bacteria were measured. Results: Group 2 showed a significantly greater surface roughness than the control group (P < 0.0001). No significant differences in the amount of surface bacteria were observed between the treated samples and the controls. In addition, there were no significant differences in bacterial adherence relative to the incubation period between the treated samples and the controls. Conclusion: The surface roughness of the titanium disks was significantly greater after treatment with APF at pH 3.5 for 30 min compared with that of the controls. In addition, we found that the amount of Porphyromonas gingivalis, Fusobacterium nucleatum, and Aggregatibactor actinomycetemcomitans was similar among all groups

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.139-145
• /
• 2017

The aim of this study was to measure the remineralization effect of APF gel and fluride varnish on artificial enamel caries using CLSM in vitro. The samples were divided into 3 groups: control, 1.23% APF gel, 5% NaF varnish. The specimen surfaces were observed by CLSM and measured average fluorescence of the lesion(AFL). The results were analyzed using one-way ANOVA and Pearson's correlation analysis at a significance level off 0.05(PSWA 18.0, SPSS Inc., USA). There were significant differences between AFL at baseline and 1 day after fluoride application(p<0.05) but there are no significant differences between ${\Delta}$ AFL of all groups (p=0.222). Result of Pearson's correlation analysis, there are no significant correlation between VHN and AFL, but there were significant correlation between AFL at baseline and 1 day after fluoride application(r=0.811, p<0.001). Although AFL decreased after fluoride application, but there was no difference between the groups. In the future, it is necessary to test the oral environment model or in situ experiment supplemented the limitations of this study.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.2
• /
• pp.89-97
• /
• 2013

The purpose of this study is to investigate fluoride release in the oral cavity from polymer adhesive tape which is NaF coated PVA. 45 healthy adults were divided into 3 groups by the type of topical fluoride applied: 60seconds taste$^{(R)}$ APF gel (group 1), FluoroDose$^{(R)}$ varnish (group 2) and NaF-PVA (group 3). Topical fluoride was applied to the facial surface of maxillary 12 teeth and unstimulated whole saliva was collected to measure fluoride release after 1, 3, 6, 12, 24, and 48 hours. Fluoride-sensitive electrode was used for measuring the fluoride concentration in the saliva samples. All three groups showed significantly higher value for fluoride concentration than the baseline after 1 and 3 hours (p < 0.05). After 6 hours, group 3 showed significantly higher fluoride concentration than the baseline (p < 0.05) and also showed significantly higher value for fluoride concentration than group 1 and group 2. Between group 1 and group 2, however, there was no significant difference statistically with respect to fluoride concentration value (p > 0.05).

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.583-591
• /
• 2022

The purpose of this study was to determine the incidence of dental erosion according to the type of lactic acid bacteria fermented oil and to identify a method for preventing dental erosion. For the lactic acid bacteria fermented milk, liquid fermented milk, condense-stirred type fermented milk, and condense-drink type fermented milk were used, and bovine tooth specimens used in the experiment were used. As a method to prevent dental erosion, the method of adding calcium to the lactic acid bacteria fermented milk, the method of applying high and low concentrations of fluoride to the teeth before exposure to the lactic acid bacteria fermented milk, and the method of applying these two methods together were measured to measure the preventive effect of dental erosion. As a result of immersing the specimen in the experimental beverage, the surface hardness of liquid fermented milk decreased the most. When comparing the difference in surface hardness before and after prophylaxis care, the Ca 2% group and the NaF 0.05%+Ca 0.5% group showed no significant difference from the negative control group, confirming that it is an effective method for preventing dental erosion. However, considering the change in taste and the stability of ingredients, a method of adding calcium at a low concentration rather than adding a high concentration of calcium is proposed. Therefore, it is recommended to use low-concentration calcium and low-concentration fluoride together to recognize the possibility of dental erosion when ingesting lactic acid bacteria and to prevent dental erosion caused by it.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.123-123
• /
• 2012

초소수성 표면은 150도 이상의 높은 물 접촉각과 10도 이하의 낮은 sliding angle을 가지며 self-cleaning, anti-contamination 기능을 갖고 있는 것이 특징이다. 재료표면의 친수성과 소수성을 제어하기 위해서는 화학적 인자인 물질의 표면에너지나 물리적 인자인 표면 거칠기를 조절하는 방법이 있다. 초소수성 표면을 구현하기 위해서는 표면의 거칠기를 증가시키거나 표면 에너지를 낮춰야 하는데 고체 표면의 거칠기를 증가시키기 위해서는 일반적으로 표면에 microscale과 nanoscale의 계층구조를 형성시키는 방법이 사용된다. 자연계에 매우 풍부하게 존재하는 실리카는 내구성과 내마모성, 화학적 안정성, 고온 안정성 등을 지니고 있으며 인체에 무해하기 때문에 다양한 종류의 전자기기 및 부품의 내외장 코팅에 적용이 검토되고 있다. 이러한 관점에서 본 연구에서는 초소수성 코팅층을 구현하는 하나의 방법으로서 졸-겔방법으로 실리카 졸을 합성하여 전기분무법을 사용하여 microscale의 실리카 입자 코팅층을 형성하였으며, 표면 미세구조 조절 및 계층구조 형성과 불소화처리 공정을 통하여 초소수성 실리카 코팅층을 제조하였다. 이러한 초소수성 실리카 코팅층의 표면거칠기, 자외선 영향향, 내구성 등을 초소수성 관점에서 평가하였다.

• Journal of Adhesion and Interface
• /
• v.16 no.3
• /
• pp.116-121
• /
• 2015

In this study, octadecyltrichlorosilane (OTS) has been used to replace fluoro-silanes which are much more expensive than OTS. In order to improve the mechanical and adhesive properties of coating layers, inorganic binders were separately synthesized based on sol-gel reaction in acidic condition. Since the synthesized silica nanoparticles gave only nano-scaled roughness, superhydrophobicity is not well obtained. Here, we present a new simple approach by intentionally inducing particle aggregation in the solution which is controlled by adjusting solvent amount. With selecting suitable sizes of silica nanoparticles, superhydrophobic surfaces were obtained with increasing the amount of organic solvents after surface hydrophobization using OTS, and an extremely water-repellent behavior was observed with zero sliding angle. This superhydrophobicity was achived only for the dielectric constant lower than 25, regardless of the composition of solvent, meaning that the dielectric constant could be an excellent indicator for fabricating superhydrobic surfaces induced by particle aggregation in the solution.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.67.2-67.2
• /
• 2017

본 연구에서는 $SiO_2$ 미세구조 상에 Pd 나노입자(NPs)를 증착하여, 불소화된 마이크로-나노 계층구조를 갖는 Pd-decorated $SiO_2$($Pd/SiO_2$)를 제작하였다. 마이크로 크기의 거칠기를 갖는 $SiO_2$ 층은 졸-겔 공정을 사용해서 제조된 용액을 전기분사함으로써 제조되었다. 이어서, 자외선(UV)을 이용한 광 환원법을 이용해 Pd 나노입자를 $SiO_2$ 층에 형성했다. 생성된 표면은 마이크로-나노의 계층구조 형태를 보여주었다. 해당 시편의 불소화 처리 후, 마이크로-나노의 계층구조 표면은 $170^{\circ}$ 이상의 물 접촉각(water contact angle; WCA) 및 $5^{\circ}$ 이하의 슬라이딩 각(sliding angle)을 보여줌으로써 물에 대해 탁월한 소수성을 나타내었다. 또한, 커피($CA=161^{\circ}$), 우유($CA=162^{\circ}$), 쥬스($CA=163^{\circ}$), 그리고 글리세롤($CA=165^{\circ}$)에 대해서도 우수한 소수 특성을 보여주었다. 또한, 이들 $Pd/SiO_2$ 층은 우수한 장기내구성 및 자외선 저항성을 보여주었다. 그리고 이어진 기름에 대한 접촉각 측정을 통해 해당 시편이 소유 특성이 아닌 친유 특성을 보여준다는 것을 확인할 수 있었고, 기름에 대한 CA는 약 ${\sim}10^{\circ}$로 매우 우수한 친유 특성을 나타내었다. 이와 같은 결과는 자체세정이 가능한 표면 및 지능형 물/기름 분리 시스템과 같은 스마트 장치에서 초소수성-친유성 특성을 갖는 계층구조의 $Pd/SiO_2$ 층을 사용할 가능성을 명확하게 보여준다고 판단된다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.71-77
• /
• 2009

The objective of this study is to find the improvement in the dental health care of the children through oral hygiene education and TBI. In Taebaek public health care center, an oral hygiene education, TBI and fluoride gel application was conducted 2 times for about 631 preschool children living in Taebaek City. The ages of preschool children were from 4 to 7. To examine the changes, a questionnaire was written and distributed for the collecting the results after the education of the second half for children, parents and teachers. As a result, the children showed better understanding of the caries through oral hygiene education and reduction of fright and fears for dental treatment. Many children learned how to brush and there was a significant increase in the number of brushing. Children learned to be able to classify good food and bad food for teeth and showed the change in eating habits although in small part through the oral hygiene education. Through this study, it is judged that the oral hygiene education of the preschool children has effectiveness and it is in need for the expansion of oral hygiene education in homes, kindergartens and dental offices.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.525-532
• /
• 1992

Fluorine-doped YBaS12TCuS13TOS17-xTFS1yT superconducting materials with y varing two orders of magnitude form 0.02 to 2.0 have been prepared by a sol-gel process by using metal nitrate salts, sodium hydroxide and sodium fluoride. Fluorine contents have been measured using an ion-selective electrode. All fluorine doped as reactant were found to be present in the resulted samples. From the observation of XRD it has been concluded that the samples with y 0.2 formed simply the single phase of perovskite structure, whereas those with y 0.5 yielded together some compounds such as BaFS12T, YFS13T and CuO in the resulted samples. The observation of solid state S019TF NMR has been carried out in order to check whether fluorine was actually incorporated into the lattice sites, and the experimental results revealed that the mole ratio of fluorine incorporated into the lattice sites of YBaS12TCuS13TOS17-xT was approximately 0.2 per mole of the compound. Also electrical resistivity measurement indicated that onset transition temperature has the tendency to increase slightly with increasing y in the dilute region as y 0.2.