• Title/Summary/Keyword: 불량조건

Search Result 460, Processing Time 0.025 seconds

The Effects of Increased Temperature on Yield Properties, Antioxidant Contents, and Pollen Viability of Adzuki Bean (Vigna angularis L.) Responses in Temperature Gradient Greenhouse and Growth Periods (온도구배온실에서 온도상승이 생육시기별 팥의 수량, 항산화 성분, 화분 임성에 미치는 영향)

  • Eun Ji Suh;Ok Jae Won;Jae-Sung Park;Won Young Han;Jin Hee Seo;Sun Tae Kim;Hye Rang Park
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.68 no.2
    • /
    • pp.47-58
    • /
    • 2023
  • The quality and yield of crops produced using field cultivation are expected to decrease due to the recent global climate change caused by extreme weather. The plant reproductive stage associated with crop yields is a highly vulnerable period to global warming caused by high temperatures. This study analyzed the adzuki bean's yield properties, antioxidant contents, and pollen viability of adzuki bean (Vigna angularis L.) under high-temperature stress and growth periods in a temperature gradient greenhouse that forms 0 to 4℃ above the outside temperatures. As the main variety of red beans cultivated in Korean farms, the "Arari" red bean was grown in the rain shield greenhouse and the temperature gradient greenhouse from 2021 to 2022 in Milyang, Korea. Compared to 2022, it showed a 0 - 1.0℃ lower temperature during the whole growth period in 2021. However, its average temperatures were 0 - 3.7℃ higher in the vegetative stage and 0.4 - 2.4℃ higher in the anthesis stage in 2021. The lowest yield (6.8 ± 0.7 g) was at the highest temperature (T4: low, 23.6℃; average, 28.5℃; high, 35.8℃) during the anthesis stage in 2021. The temperatures of the mature stage were 1.7 - 3.9℃, which were higher in 2022 than in 2021, although the low temperatures of 2022 were lower than in 2021. The yields of the mature stage in 2022 increased more than in 2021 because of the high temperature of the mature stage. The growth and yield were good at 40.5℃ in the vegetative stage. However, growth was poor when the average temperature was 27.0℃ or higher, and yields decreased during the flowering period. Total polyphenol and flavonoid contents were increased, and the pollen viability was 40.75% in the whole growth period at high temperature (T4: low, 22.9℃; average, 28.8℃; high, 36.9℃). These results showed that the antioxidant levels increased when the antioxidant component was affected at higher temperatures than at normal. In contrast, the pollen viability-related yield decreased as the temperature increased. Our results are the basic data for field growers and the breeding of thermos-tolerance in adzuki beans to prepare for the changeable future climate.

Archaeometric Significant and Manufacturing Characteristics of Comb-Pattern Pottery from the Daejuk-ri Shell Midden, Seosan, Korea (서산 대죽리 패총 출토 빗살무늬토기의 제작특성과 고고과학적 의미)

  • AN Deogim;LEE Chan Hee
    • Korean Journal of Heritage: History & Science
    • /
    • v.55 no.4
    • /
    • pp.138-164
    • /
    • 2022
  • The Neolithic shell midden in Daejuk-ri, Seosan, is distributed on the gentle slope of a low hill close to the west coast. The bedrock of the area consists mainly of schist with various mafic minerals, but shows a partial gneiss pattern. The site consists of loamy topsoil and clay loam subsoil, and the degree of siallization is relatively low. Although the pottery excavated from the shell midden shares mostly similar features, a variety of shapes and patterns coexist. The surface colors, thickness and physical properties are slightly different. The pottery can be subdivided into three types (IA, IB and II) according to the composition of the body clay, the temper and the existence of a black core. Types IA and IB are colorless mineral pottery with a non-black or black core respectively. TypeII is colored mineral pottery with a non-black core. Type I pottery also contains non-plastic colored minerals, but type II contains a large amount of biotite, chlorite, talc, amphibole, diopside and tremolite, which include a large amount of Mg and Fe. The studied pottery contains a small amount of organic matter. Considering the grain size and relatively poor sorting and roundness of the non-plastic particles, the pottery appears to be made by adding coarse non-plastic tempers for special purposes to the untreated weathered soil around the site. The three types of pottery seem to have been incompletely fired in general. While type IB has the lowest degree of oxidation, typeII shows the highest degree of redness and oxidation. It can be interpreted that these differences depend on the firing temperature and the ratio of non-plastic particles. Through a synthesis of the minerals, geochemical data and thermal history, it can be determined that the firing temperature ranged from 600 to 700℃. The pottery types of the Daejuk-ri Shell Midden have slightly different production conditions, mineral compositions, and physical properties, but have undergone similar production processes with basically the same clay materials. The clay is almost identical to the composition of the bedrock and weathered soil distributed in the Daejuk-ri area. Currently, there is an industrial complex in the area, so it is difficult to confirm the soil and geological distribution of the site. However, it is highly probable that the area around the site was self-sufficient for the clay and tempers required for the production of the Neolithic pottery. Therefore, it can be interpreted that the group that left the shell midden in Daejuk-ri lived near the site, visited the site for the purpose of collecting and processing shellfish, and discarded the broken pottery along with shells.

Effects of Korean Goldenbell (Forsythia koreana) Leaf on the Growth, Body Color and Hepatopancreatic Structure of Giant Freshwater Prawn (Macrobrachium rosenbergii) (큰징거미새우(Macrobrachium rosenbergii)의 성장, 체색 및 간췌장 구조에 미치는 개나리(Forsythia koreana) 잎의 영향)

  • Dong Woo Kim;Jeong Hee Yoon;Ji Eun Ha;Jeong Hee Min;Bo Ryung Park;Joon Yeong Kwon
    • Journal of Marine Life Science
    • /
    • v.8 no.2
    • /
    • pp.166-177
    • /
    • 2023
  • The giant freshwater prawn (Macrobrachium rosenbergii) suffers economic losses in aquaculture facilities due to problems such as poor body color and carapace weakness. While this species is farmed on an animal-based diet, in the wild it consumes a detritus diet with a high proportion of plant matter. The plant matter they consume in the wild is not only a source of basic nutrients, but also carotenoids, which are responsible for body color. Korean goldenbell (Forsythia koreana) is a flowering tree widely distributed in Korea, and its leaves contain carotenoids comparable to yellow carrots. In this study, we investigated the effects of feeding Forsythia leaves to M. rosenbergii on their body color and health. The experimental diets were 100% commercial feed (control), CON, 80% commercial feed plus 20% Forsythia leaf powder, FP, and 80% commercial feed plus 20% unprocessed Forsythia leaves, FL, and each diet was fed to juvenile prawn with an average weight of 1.1 ± 0.2 g for 10 weeks. In terms of body color, the CON prawn were consistently clear ivory in color, while the FP and FL prawn changed from blue to dark brown as the days of rearing progressed. Survival and growth were not significantly different between CON and FP or FL. Histological comparison of the hepatopancreas revealed that the vacuole size of B cells, the constituent cells of the hepatopancreatic tubule, was significantly larger in FP and FL compared to CON. The vacuoles of B cells are responsible for the absorption and digestion of nutrients, suggesting that the supply of Forsythia leaves may have had a positive effect on the health of the M. rosenbergii. The above results show that the use of Forsythia leaves in the aquaculture of M. rosenbergii can be expected to improve body color and health without inhibiting growth.

Changes of Distribution of Vascular Hydrophytes in the Nakdong River Estuary and Growth Dynamics of Schenoplectus triqueter, Waterfowl Food Plant (낙동강 하구의 수생관속식물의 분포 변화와 수금류(고니류)의 먹이식물인 세모고랭이의 성장 변화)

  • Kim, Gu-Yeon;Lee, Chan-Woo;Yoon, Hae-Soon;Joo, Gea-Jae
    • The Korean Journal of Ecology
    • /
    • v.28 no.5
    • /
    • pp.335-345
    • /
    • 2005
  • A study on changes on the distribution of vascular hydrophytes and the growth pattern of Schenoplectus triqueter (Scirpus triqueter) was undertaken at the Nakdong River estuary from 2002 to 2004. The change was due to physical alteration of the estuary for the past 25 years. These plant species are the major food sources for winter waterfowl. A total of 32 species of vascular hydrophytes from 17 families were found in the West Nakdong River (freshwater), the main channel of Nakdong River (freshwater) and the Nakdong River Estuary (brackish water). After the construction of the barrage on the estuary in 1987, the number of hydrophytes has remarkably increased to 17 species (5 species in 1985) in the main channel of the River. In particular, a community of Eurale ferox was found at the backwater wetland of the Daejeo side of the main channel. The introduced species of Eichhornia crassipes and Pistia stratiotes that were epidemic in 2001 at West Nakdong River was not found any more. The other species such as Nymphoides indica, Myriophyllum spicatum, Ruppia spp. were rediscovered. The large area (about 1,300ha) of Zostera spp. was the main sources of food for swans, but disappeared because of direct and indirect impacts of reclamation in the River estuary. Currently, there remains a small patch of Zostera spp. and about 250ha of S. triqueter. Schenoplectus triqueter grew mostly between April-September and tuber formed, between September-October. The growth of S. triqueter up to $60\sim80cm$ in length was observed in 5 sites out of the 7 sites in brackish area. Tubers of S. triqueter were eaten by waterfowls such as swans as winter food. In five sites, tubers took $44\sim57%$ of total biomass in October. Tubers were found in deep layers; $5\sim15cm$ (9%), $15\sim25cm$ (28%), $25\sim40cm$ (55%), below 40cm $(6\sim7%)$. The distribution of vascular hydrophytes has remarkably changed in the Nakdong River Estuary due to the reclamation of the area. In order to determine the extent of changes of the distribution of these plants and the carrying capacity of the area for waterfowl, an intensive research is urgently needed.

Study on the Tractive Characteristics of the Seed Furrow Opener for No-till Planter (무경운(無耕耘) 파종기용(播種機用) 구체기(溝切器)의 견인특성(牽引特性)에 관(關)한 연구(硏究))

  • La, Woo-Jung
    • Korean Journal of Agricultural Science
    • /
    • v.5 no.2
    • /
    • pp.149-157
    • /
    • 1978
  • This study was carried out to obtain basic data for the type selection of furrow openers for the no-tillage soybean planter trailed by the two-wheel tractor from the standpoint of minimum draft and good performance of furrowing. For this study, two models of furrow opener, hoe and disc type, were tested on the artificial soil stuffed in the moving soil bin. The results obtained were as follows. In the case of disc furrow opener, the drafts were measured according to various diameters of discs under the condition of disc angle $8^{\circ}$ and $16^{\circ}$, working depth 3cm and 6cm, working speed 2.75cm/sec. Minimum draft appeared when the diameter of disc was about 28cm and the drafts increased as the diameter of discs became larger or smaller than this diameter. Specific draft showed almost same tendencies as above but showed the minimum when the diameter was about 30cm. For the purpose of controlling the seeding depth, the relationships between draft and working depths, 3cm and 6cm, were tested. The variations of draft concerning the various working depths showed linear changes and were affected in higher degree by depths than other factors. There were general tendencies at both working depths, 3cm and 6cm, that total draft showed the minimum with the disc diameter of about 28cm and specific draft showed it with the disc diameter of about 30cm regardless of disc angle and working speed. For the purpose of controlling the working width and speed, the relationships among drafts, disc angle and working speed were investigated and there were general tendencies that the draft increased as the angle and speed were increased and the draft was affected more by speed than by angle. To compare the hoe-type with disc-type opener, the specific drafts of hoe openers were compared with those of disc opener of $16^{\circ}$ angle and 30cm diameter. The specific draft of disc-type opener with the diameter of 30cm was $0.35{\sim}0.5kg/cm^2$, while $0.71{\sim}1.02kg/cm^2$ in the case of hoe type with the lift angle of $20^{\circ}$ which is 2 times as much as that of disc type in average value. And the furrows opened by disc openers were cleaner than those opened by hoe openers.

  • PDF

Growth and Yield Characteristics of Foxtail Millet, Comon Millet Cereal Crops on Marginal Agricultural Lands (조건 불리 한계농경지에서의 조, 수수, 기장의 생육 및 수량)

  • Yoon, Seong-Tak;Lee, Myung-Cheol;Kim, Jeong-Soon;Zhang, Qingyu;Xu, Zhen-Yu;Kim, Young-Bok;Kim, Tae-Ho;Nam, Jung-Chang;Nam, Min-Hee;Lee, Young-Hawn;Hwang, Jae-Bok;Shim, Sang-In;Kim, Seong-Min
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.55 no.4
    • /
    • pp.350-356
    • /
    • 2010
  • This experiment was conducted to select optimum minor cereal crop and variety for the marginal agricultural lands so that they would be used to increase the agricultural land use rate in mountainous areas. This experiment used three different marginal agricultural lands, that is, slope land, barren land and gravelly land. Soil pH of control field was 7.85, slightly alkali, whereas gravelly land showed strong acid(pH 5.1). EC of marginal agricultural lands was generally lower compared to the control, especially barren land showed 0.05dS $m^{-1}$ which was the lowest among marginal agricultural lands. Foxtail millet showed no significant difference of heading and ripening date among marginal agricultural lands. Foxtail millet of slope land showed the highest culm length(169.5 cm) and grains per ear(4913.9 grains) among marginal agricultural lands except control field. Growth duration of three varieties was varied from 112 to 113days, which was not different statistically. In grains per ear of common millet, slope land showed 787.1 grains which was the highest among marginal agricultural lands except control field. Among varieties, Byorukgijang showed the highest grains per ear(827.2 g/ear), whereas 1000 grain weight was 5.5 g which was lower compared to that of Hwanggijang(6.2 g). In sorghum, slope land showed the highest grains(2563.8 grains) per ear and ears per 3.3 $m^2$(26.0 ears) except control field. Growth duration of three sorghum varieties almost the same from 122 to 123 days, whereas the highest grains per ear was obtained from Moktaksusu(2357.6 grains). Jangmoksusu showed the highest 1000 grain weight(23.8 g) among three sorghum varieties. In yield of three foxtail millets, the highest yield was obtained from slope land(282.0 kg/10a) among marginal agricultural lands and Mongdangjo showed the highest yield(252.3 kg/10a) among three varieties. In yield of three common millets, the highest yield was obtained from slope land(196.0 kg/10a) among marginal agricultural lands and Byorukgijang showed the highest yield(173.8 kg/10a) in three varieties. In three sorghum varieties, the highest yield was obtained from slope land(301.7 kg/10a) among marginal agricultural lands and Moktaksusu showed the highest yield(236.5 kg/10a) among three varieties.

Problems of Environmental Pollution (환경오염의 세계적인 경향)

  • 송인현
    • Proceedings of the KOR-BRONCHOESO Conference
    • /
    • 1972.03a
    • /
    • pp.3.4-5
    • /
    • 1972
  • 생활수준이 낮은 단계에 있어서는 우선 식량에 대한 수요가 강하다. 인간의 욕구가 만족스럽게 먹는다는 것에 대하여 제일 강하게 발동하는 것이다 그러나 점차 과학기술과 산업과 경제가 발전하여 성장과정에 오르게 되고 소득수준도 향상하게 되면 시장기구를 통해서 구입 할 수 있는 개인의 물적 소비재에 대해서는 점차 충족하게 되며 식량이외에도 의복, 전기기구 및 일용생활용품, 자동차 등에 이르기까지 더욱 고차원의 소비재가 보급하게 되는 것이다. 이렇게 되며는 사람의 욕구는 사적 재물이나 물적 수요에서 점진적으로 공공재나 또는 질적 수요(주택, 생활환경 등)의 방향으로 움직이게 되는 것으로써 여기에 환경오염 또는 공해문제에 대하여 의식하게 된다. 그러나 여기에서 더욱이 문제점이 되는 것은 소득 수준의 향상 과정이란 그 자체가 환경오염의 커다란 요인이라는 점이며 자동차의 급격한 보급과 생활의 편의성을 구하여 집중되는 도시인구의 집적, 높은 소득을 보장하기 위한 생산성 높은 중화학공업의 발전 등등은 그 자체가 환경권이란 사람이 요구하는 고차원의 권리를 침해하는 직접적인 요인이 된다는 것이다. 이와 같은 환경오염이나 공해문제에 대한 세계적인 논의는 이미 시작된 지 오래이지만 현재는 우리의 건강보호를 위해서나 생활환경의 보전을 위해서라는 점에서는 그치는 것이 아니고, 더욱 넓혀서 자연의 보호, 자원의 보호라는 견지로 확대되고 있다. 이와 같은 세계적인 확대된 이해와 이에 대한 대책강구의 제안은 1968년 국제연합의 경제사회이사회에서 스웨덴 정부대표에 의하여 제시되었으며 1969년의 우- 탄트 사무총장의 인간환경에 관한 보고서, 1970년 Nixon 미대통령의 연두일반교서 그리고 1972년 5월 6일 스웨덴의 스톡홀롬에서 개최되는 인간환경회의의 주제 등을 통해서 알 수 있고, 종래의 공해나 생활환경의 오염문제라는 좁은 개념에서가 아니고 인간환경전체의 문제로 다루고 있는 것이다. 즉 환경개발(도시, 산업, 지역개발에 수반된 문제), 환경오염(인위적 행위에 의하여 환경의 대인간조건이 악화하는 문제) 자연ㆍ자원의 보호관리(지하, 해양자원, 동식물, 풍경경치의 문제)란 3개 측면에서 다루고 있는 것이다. 환경오염이란 문제를 중 심하여 보면 환경을 구성하는 기본적인 요소로서 대기, 물, 토지 또는 지각. 그리고 공간의 사대요소로 집약하여 생각할 수 있음으로 이 4요소의 오염이 문제가 되는 것이다. 대기의 오염은 환경의 오염중 가장 널리 알려진, 또 가장 오랜 역사를 가진 오염의 문제로써 이에 속하는 오염인자는 분진, 매연, 유해가스(유황산화물, 불화수소, 염화수소, 질소산화물, 일산 화염소 등) 등 대기의 1차 오염과 1차 존재한 물질이 자외선의 작용으로 변화발생 하는 오존, PAN등 광화학물질이 형성되는 2차적인 오염을 들 수 있다. 기외 카도미움, 연등 유해중금속이나 방사선물질이 대기로부터 토지를 오염시켜서 토지에 서식하는 생물의 오염을 야기케 한다는 점등이 명백하여지고 있으며 대기의 오염은 이런 오염물질이 대기중에서 이동하여 강우에 의한 침강물질의 변화를 일으키게 되며 소위 광역오염문제를 발생케하며 동시에 토지의 토질저하등을 가져오게 한다. 물의 오염은 크게 내육수의 오염과 해양의 오염의 양면으로 나누어 볼 수 있다. 하천의 오염을 방지하고 하천을 보호하기 위한 움직임 역시 환경오염의 역사상 오래된 문제이며 시초에는 인분뇨와의 연결에서 오는 세균에 의한 오염이나 양수 기타 일반하수와의 연결에서 오는 오염에 대비하는 것부터 시작하였지만 근래에는 산업공장폐수에 의한 각종 화학적유해물질과 염료 그리고 석유화학의 발달에 의한 폐유등으로 인한 수질오탁문제가 점차 크게 대두되고 있다. 이것은 측 오염이란 시초에 우리에게 주는 불쾌감이 크므로 이것을 피하자는 것부터 시작하여 인간의 건강을 지키고 각종 사용수를 보존하자는 용수보존으로 그리고 이제는 건강과 용수보존뿐만 아니라 이것이 농림 수산물에 대한 큰 피해를 주게됨으로써 오는 자연환경의 생태계보전의 문제로 확대전환하고 있는 것이다. ?간 특히 해양오염에 대한 문제는 국지적인 것에만 끝이는 것이 아니고 전세계의 해양에 곧 연결되는 것이므로 세계각국의 공통관심사로 등장케 되었으며 이것은 특히 폐유가 유류수송 도중에 해양에 투기되는 유류에 의한 해양의 유막성형에서 오는 기상의 변화와 물피해등이 막심함으로 심각화 되고 있다. 각국이 자국의 해안과 해양을 보호하기 위하여 조치를 서두르고 있는 현시점에서 볼 때에는 이는 국제문제화하고 있으며 세계적인 국제적 협력과 협조의 필요성이 강조되는 좋은 예라 하겠다. 토양의 오염에 있어서는 대기나 수질의 오염이 구국적으로 토양과 관련되고 토양으로 환원되는 것이지만 근래에 많이 보급사용되는 농약과 화학비료의 문제는 토양자체의 오염에만 그치는 것이 아니고 농작물을 식품으로 하여 섭취함으로써 발생되는 인체나 기타생물체의 피해를 고려할 때 더욱 중요한 것이며, 또 토질의 저하를 가져오게 하여 농림생산에 미치는 영향이 적지 않을 것이다. 지반강하는 지각 에 주는 인공적 영향의 대표적인 것으로써 지하수나 지하 천연가스를 채취이용하기 위하여 파들어 감으로써 지반이 침하 하는 것이며 건축물에 대한 영향 특히 풍수해시의 재해를 크게 할 우려가 있는 것이다. 공간에 있어서의 환경오염에는 소음, 진동, 광선, 악취 등이 있다. 이들은 특수한 작업환경의 경우를 제외하고는 건강에 직접적인 큰 피해를 준다고 생각할 수 없으나 소음, 진동, 관선, 악취 등은 일반 일상시민생활에 불쾌나 불안을 줌으로써 안정된 생활을 방해하는 요인이 되는 것이다. 공간의 오염물로써 새로운 주목을 끌게된 것은 도시산업폐기물로써 이들은 대기나 물 또는 토지를 오염시킬 뿐만 아니라 공간을 점령함으로써 도시의 미관이나 기능을 손상케 하는 것이다. 즉 노배폐차의 잔해, 냉장고등고형폐기물등의 재생불가능한 것이나 비니루등 합성물질로 된 용기나 포장 등으로 연소분해 되지 않은 내구소비재가 이에 해당하는 것으로 이는 maker의 양식에 호소하여 그 책임 하에 해결되어야 할 문제로 본다. 이렇듯 환경오염은 각양각색으로 그 오염물질의 주요 발생원인 산업장이나 기타 기관에서의 발생요인을 살펴보며는 다음과 같은 것으로 요약할 수 있다. A. 제도적 요인 1. 관리체재의 미비 2. 관리법규의 미비 3. 책임소재의 불명확 B. 자재적 요인 1. 사용자재의 선택부적 2. 개량대책급 연구의 미흡 C. 기술적 요인 1. 시설의 설계불량, 공정의 결함 2. 시설의 점검, 보전의 불충분 3. 도출물의 취급에 대한 검사부족 4. 발생방지 시설의 미설치, 결함 D. 교육적 요인 1. 오염물질 방제지식의 결여 2. 법규의 오해, 미숙지 E. 경제적 요인 1. 자금부족 2. 융자상의 문제 3. 경제성의 문제 F. 정신적 요인 1. 사회적 도의심의 결여(이기주의) 2. 태만 3. 무지, 무관심 등이다. 따라서 환경오염의 방지란 상기한 문제의 해결에 기대하지 않을 수 없으나 이를 해결하기 위하여는 국내적 국제적 상호협조에 의한 사회각층의 총력적 대책이 시급한 것이다. 이와 같은 환경오염이 단속된다 하며는 미구에 인류의 건강은 물론 그 존립마저 기대하기 어려울 것이며, 현재는 점진적으로 급성피해에 대하여는 그 흥미가 집중되어 그 대비책도 많이 논의되고 있지만 미량의 단속접촉에 의한 만성축적에 관한 문제나 이와 같은 환경오염이 앞으로 태어날 신생률에 대한 영향이나 유전정보에 관한 연구는 장차에 대비하는 문제로써 중요한 것이라 생각된다. 기외에 우려되는 점은 오염방지책을 적극 추진함으로써 올 수 있는 파생적인 문제이다. 즉 오염을 방지하기 위하여 생산기업체가 투자를 하게 되며는 그만큼 생산원가가 상승할 것이며 소비가격도 오를 것이다. 반면 이런 시책에 뒤떨어진 후진국의 값싼 생산국은 자연 수입이 억제 당할 것이며, 이렇게되면 후진국은 무역경쟁에서 큰 상처를 입게될 것이고 뿐만 아니라 선진국에 필요한 오염물질의 발생이 높은 생산기기를 자연후진국에 양도하게 될 것임으로 후진국의 환경오염은 배가할 우려가 있는 것이다. 또 해양오염을 방지할 목적에서와 같이 자국의 해안보호를 위하여 마련된 법의 규제는 타국의 선박운항에 많은 제약을 가하게 될 것이며 이것 역시 시설이 미약한 약소후진국의 선박에 크게 영향을 미치게 될 것임으로 교통, 해운, 무역등을 통한 약소후진국의 경제성장에 제동을 거는 것이 될 것이다. 이렇듯 환경오염의 문제는 환경자체에 대해서만 아니라 부산물적으로 특히 후진국에는 의외 문제를 던져주게 되는 것임으로 환경오염에 대해서는 물론, 전술한 바와 같이 인간환경전체의 문제로써 Nixon 대통령이 말한 결의와 창의와 그리고 자금을 가지고 과감하게 대처해 나가야 할 것이다.

  • PDF

Response of Potassium on Main Upland Crops (주요(主要) 전작물(田作物)에 대(對)한 가리성분(加里成分)의 비교(肥效))

  • Ryn, In Soo
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.10 no.3
    • /
    • pp.171-188
    • /
    • 1977
  • The response and effect on main upland crops to potassium were discussed and summarized as follows. 1. Adequate average amounts of potash per 10a were 32kg for forage crop; 22.5kg for vegetable crops; 17.3kg for fruit trees; 13.3kg for potatoes; and 6.5kg for cereal crops. Demand of potassium fertilizer in the future will be increased by expanding the acreage of forage crops, vegetable crops and fruit trees. 2. On the average, optimum potash rates on barley, wheat, soybean, corn, white potato and sweet potato were 6.5, 6.9, 4.5, 8.1, 8.9, and 17.7kg per 10a respectively. Yield increaments per 1kg of potash per 10a were 4-5kgs on the average for cereal crops, 68kg for white potato, and 24kg for sweet potato. 3. According to the soil testing data, the exchangeable potassium in the coastal area was higher than that in the inland area and medium in the mountainous area. The exchangeable potassium per province in decreasing order is Jeju>Jeonnam>Kangweon>Kyongnam. Barley : 4. The response of barley to an adequate rate of potassium seemed to be affected more by differences in climatic conditions than to the nature of the soil. 5. The response and the adequate rate of potassium in the southern area, where the temperature is higher, were low because of more release of potassium from the soil. However, the adequate rate of phosphorus was increased due to the fixation of applied phosphorus into the soil in high temperature regions. The more nitrogen application would be required in the southern area due to its high precipitation. 6. The average response of barley to potassium was lower in the southern provinces than northern provinces. Kyongsangpukdo, a southern province, showed a relatively higher response because of the low exchangeable potassium content in the soil and the low-temperature environment in most of cultivation area. 7. Large annual variations in the response to and adequate rates of potassium on barley were noticed. In a cold year, the response of barley to potassium was 2 to 3 times higher than in a normal year. And in the year affected by moisture and drought damage, the responses to potassium was low but adequate rates was higher than cold year. 8. The content of exchangeable potassium in the soil parent materials, in increasing order was Crystalline Schist, Granite, Sedimentary and Basalt. The response of barley to potash occurred in the opposite order with the smallest response being in Crystalline Schist soil. There was a negative correlation between the response and exchangeable potassium contents but there was nearly no difference in the adequate rates of potassium. 9. Exchangeable potassium according to the mode of soil deposition was Alluvium>Residium>Old alluvium>Valley alluvium. The highest response to potash was obtained in Valley alluvium while the other s showed only small differences in responses. 10. Response and adequate rates of potassium seemed to be affected greatly by differences in soil texture. The response to potassium was higher in Sandy loam and Loam soils but the optimum rate of potassium was higher in Clay and Clay loam. Especially when excess amount of potassium was applied in Sandy loam and Loam soils the yield was decreased. 11. The application of potassium retarded the heading date by 1.7 days and increased the length of culm. the number of spikelet per plant, the 1,000 grain weight and the ratio of grain weight to straw. Soybean : 12. Average response of soybean to potassium was the lowest among other cereal crops but 28kg of grain yield was incrased by applying potash at 8kg/10a in newly reclaimed soils. 13. The response in the parent materials soil was in the order of Basalt (Jeju)>Sedimentay>Granite>Lime stone but this response has very wide variations year to year. Corn : 14. The response of corn to potassium decreased in soils where the exchangeable potassium content was high. However, the optimum rate of applied potassium was increased as the soil potassium content was increased because corn production is proportional to the content of soil potassium. 15. An interaction between the response to potassium and the level of phosphorus was noted. A higher response to potassium and higher rates of applied potassium was observed in soils contained optimum level of phosphorus. Potatoes : 16. White potato had a higher requirement for nitrogen than for potassium, which may imply that potato seems to have a higher capability of soil potassium uptake. 17. The yield of white potato was higher in Sandy loam than in Clay loam soil. Potato yields were also higher in soils where the exchangeable potassium content was high even in the same soil texture. However, the response to applied potassium was higher in Clay loam soils than in Sandy loam soils and in paddy soil than in upland soil. 18. The requirement for nitrogen and phosphorus by sweet potato was relatively low. The sweet potato yield is relatively high even under unfavorable soil conditions. A characteristics of sweet potatoes is to require higher level of potassium and to show significant responses to potassium. 19. The response of sweet potato to potassium varied according to soil texture. Higher yields were obtained in Sandy soil, which has a low exchangeable potassium content, by applying sufficient potassium. 20. When the optimum rate of potassium was applied, the yields of sweet potato in newly reclaimed soil were comparable to that in older upland soils.

  • PDF

Characteristics and classification of paddy soils on the Gimje-Mangyeong plains (김제만경평야(金堤萬頃平野)의 답토양특성(沓土壤特性)과 그 분류(分類)에 관(關)한 연구(硏究))

  • Shin, Yong Hwa
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.5 no.2
    • /
    • pp.1-38
    • /
    • 1972
  • This study, designed to establish a classification system of paddy soils and suitability groups on productivity and management of paddy land based on soil characteristics, has been made for the paddy soils on the Gimje-Mangyeong plains. The morphological, physical and chemical properties of the 15 paddy soil series found on these plains are briefly as follows: Ten soil series (Baeggu, Bongnam, Buyong, Gimje, Gongdeog, Honam, Jeonbug, Jisan, Mangyeong and Suam) have a B horizon (cambic B), two soil series (Geugrag and Hwadong) have a Bt horizon (argillic B), and three soil series (Gwanghwal, Hwagye and Sindab) have no B or Bt horizons. Uniquely, both the Bongnam and Gongdeog series contain a muck layer in the lower part of subsoil. Four soil series (Baeggu, Gongdeog, Gwanghwal and Sindab) generally are bluish gray and dark gray, and eight soil series (Bongnam, Buyong, Gimje, Honam, Jeonbug, Jisan, Mangyeong and Suam) are either gray or grayish brown. Three soil series (Geugrag, Hwadong and Hwagye), however, are partially gleyed in the surface and subsurface, but have a yellowish brown to brown subsoil or substrata. Seven soil series (Bongnam, Buyong, Geugrag, Gimje, Gongdeog, Honam and Hwadong) are of fine clayey texture, three soil series (Baeggu, Jeonbug and Jisan) belong to fine loamy and fine silty, three soil series (Gwanghwal, Mangyeong and Suam) to coarse loamy and coarse silty, and two soil series (Hwagye and Sindab) to sandy and sandy skeletal texture classes. The carbon content of the surface soil ranges from 0.29 to 2.18 percent, mostly 1.0 to 2.0 percent. The total nitrogen content of the surface soil ranges from 0.03 to 0.25 percent, showing a tendency to decrease irregularly with depth. The C/N ratio in the surface soil ranges from 4.6 to 15.5, dominantly from 8 to 10. The C/N ratio in the subsoil and substrata, however, has a wide range from 3.0 to 20.25. The soil reaction ranges from 4.5 to 8.0. All soil series except the Gwanghwal and Mangyeong series belong to the acid reaction class. The cation exchange cpacity in the surface soil ranges from 5 to 13 milliequivalents per 100 grams of soil, and in all the subsoil and substrata except those of a sandy texture, from 10 to 20 milliequivalents per 100 grams of soil. The base saturation of the soil series except Baeggu and Gongdeog is more than 60 percent. The active iron content of the surface soil ranges from 0.45 to 1.81 ppm, easily-reduceable manganese from 15 to 148 ppm, and available silica from 36 to 366 ppm. The iron and manganese are generally accumulated in a similar position (10 to 70cm. depth), and silica occurs in the same horizon with that of iron and manganese, or in the deeper horizons in the soil profile. The properties of each soil series extending from the sea shore towards the continental plains change with distance and they are related with distance (x) as follows: y(surface soil, clay content) = $$-0.2491x^2+6.0388x-1.1251$$ y(subsoil or subsurface soil, clay content) = $$-0.31646x^2+7.84818x-2.50008$$ y(surface soil, organic carbon content) = $$-0.0089x^2+0.2192x+0.1366$$ y(subsoil or subsurface soil, pH) = $$-0.0178x^2-0.04534x+8.3531$$ Soil profile development, soil color, depositional and organic layers, soil texture and soil reaction etc. are thought to be the major items that should be considered in a paddy soil classification. It was found that most of the soils belonging to the moderately well, somewhat poorly and poorly drained fine and medium textured soils and moderately deep fine textured soils over coarse materials, produce higher paddy yields in excess of 3,750 kg/ha. and most of the soils belonging to the coarse textured soils, well drained fine textured soils, moderately deep medium textured soils over coarse materials and saline soils, produce yields less than 3,750kg/ha. Soil texture of the profile, available soil depth, salinity and gleying of the surface and subsurface soils etc. seem to be the major factors determining rice yields, and these factors are considered when establishing suitability groups for paddy land. The great group, group, subgroup, family and series are proposed for the classification categories of paddy soils. The soil series is the basic category of the classification. The argillic horizon (Bt horizon) and cambic horizon (B horizon) are proposed as two diagnostic horizons of great group level for the determination of the morphological properties of soils in the classification. The specific soil characteristics considered in the group and subgroup levels are soil color of the profile (bluish gray, gray or yellowish brown), salinity (salic), depositonal (fluvic) and muck layers (mucky), and gleying of surface and subsurface soils (gleyic). The family levels are classified on the basis of soil reaction, soil texture and gravel content of the profile. The definitions are given on each classification category, diagnostic horizons and specific soil characteristics respectively. The soils on these plains are classified in eight subgroups and examined under the existing classification system. Further, the suitability group, can be divided into two major categories, suitability class and subclass. The soils within a suitability class are similar in potential productivity and limitation on use and management. Class 1 through 4 are distinguished from each other by combination of soil characteristics. Subclasses are divided from classes that have the same kind of dominant limitations such as slope(e), wettness(w), sandy(s), gravels(g), salinity(t) and non-gleying of the surface and subsurface soils(n). The above suitability classes and subclasses are examined, and the definitions are given. Seven subclasses are found on these plains for paddy soils. The classification and suitability group of 15 paddy soil series on the Gimje-Mangyeong plains may now be tabulated as follows.

  • PDF

A Study on Physical and Mechanical Properties of Sawdustboards combined with Polypropylene Chip and Oriented Thread (폴리프로필렌사(絲)칩과 배향사(配向絲)를 결체(結締)한 톱밥보드의 물리적(物理的) 및 기계적(機械的) 성질(性質)에 관(關)한 연구(硏究))

  • Suh, Jin-Suk;Lee, Phil-Woo
    • Journal of the Korean Wood Science and Technology
    • /
    • v.16 no.2
    • /
    • pp.1-41
    • /
    • 1988
  • For the purpose of utilizing the sawdust having poor combining properties as board raw material and resulting in dimensional instability of board, polypropylene chip (abbreviated below as PP chip) or oriented PP thread was combined with sawdust particle from white meranti(Shorea sp.). The PP chip was prepared from PP thread in length of 0.25, 0.5, 1.0 and 1.5 cm for conventional blending application. Thereafter, the PP chip cut as above was combined with the sawdust particle by 3, 6, 9, 12 and 15% on the weight basis of board. Oriented PP threads were aligned with spacing of 0.5, 1.0 and 1.5cm along transverse direction of board. The physical and mechanical properties on one, two and three layer boards manufactured with the above combining conditions were investigated. The conclusions obtained at this study were summarized as follows: 1. In thickness swelling, all one layer boards combined with PP chips showed lower values than control sawdustboard, and gradually clear decreasing tendendy with the increase of PP chip composition. Two layer board showed higher swelling value than one layer board, but the majority of boards lower values than control sawdustboard. All three layer boards showed lower swelling values than control sawdustboard. 2. In the PP chip and oriented thread combining board, the swelling values of boards combining 0.5cm spacing oriented thread with 1.0 or 1.5cm long PP chip in 12 and 15% by board weight were much lower than the lowest of one or three layer. 3. In specific gravity of 0.51, modulus of rupture of one layer board combined with 3% PP chip showed higher value than control sawdustboard. However, moduli of rupture of the boards with every PP chip composition did not exceed 80kgf/cm2, the low limit value of type 100 board, Korean Industrial Standard KS F 3104 Particleboards. Moduli of rupture of 6%, 1.5cm-long and 3% PP chip combined boards in specific gravity of 0.63 as well as PP chip combined board in specific gravity of 0.72 exceeded 80kgf/$cm^2$ on KS F 3104. Two layer boards combined with every PI' chip composition showed lower values than control sawdustboard and one layer board. Three layer boards combined with.1.5cm long PP chip in 3, 6 and 9% combination level showed higher values than control sawdustboard, and exceeded 80kgf/$cm^2$ on KS F 3104. 4. In modulus of rupture of PP thread oriented sawdustboard, 0.5cm spacing oriented board showed the highest value, and 1.0 and 1.5cm spacing oriented boards lower values than the 0.5cm. However, all PP thread oriented sawdustboards showed higher values than control saw-dustboard. 5. Moduli of rupture in the majority of PP chip and oriented thread combining boards were higher than 80kgf/$cm^2$ on KS F 3104. Moduli of rupture in the boards combining longer PP chip with narrower 0.5cm spacing oriented thread showed high values. In accordance with the spacing increase of oriented thread, moduli of rupture in the PP chip and oriented thread combining boards showed increasing tendency compared with oriented sawdustboard. 6. Moduli of elasticity in one, two and three layer boards were lower than those of control sawdustboard, however, moduli of elasticity of oriented sawdustboards with 0.5, 1.0 and 1.5cm spacing increased 20, 18 and 10% compared with control sawdustboard, respectively. 7. Moduli of elasticity in the majority of PP chip and oriented thread combining boards in 0.5, 1.0 and 1.5cm oriented spacing showed much higher values than control sawdustboard. On the whole, moduli of elasticity in the oriented boards combined with 9% or less combination level and 0.5cm or more length of PP chip showed higher values than oriented sawdustboard. The increasing effect on modulus of elasticity was shown by the PP chip composition in oriented board with narrow spacing. 8. Internal bond strengths of all one layer PP chip combined boards showed lower values than control sawdust board, however, the PP chip combined boards in specific gravity of 0.63 and 0.72 exceeded 1.5kgf/$cm^2$, the low limit value of type 100 board and 3kgf/$cm^2$, type 200 board on KS F 3104, respectively. And also most of all two, three layer-and oriented boards exceeded 3kgf/$cm^2$ on KS F. 9. In general, screw holding strength of one layer board combined with PP chip showed lower value than control sawdustboard, however, that of two or three layer board combined with PP chip did no decreased tendency, and even screw holding strength with the increase of PP chip composition. In the PP chip and oriented PP thread combining boards, most of the boards showed higher values than control sawdustboard in 9% or less PP chip composition.

  • PDF