• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1677-1683
• /
• 2015

To cope with exhaust gas regulation, Diesel engine applied to electronic control system. As it accurately regulated the injected fuel mass and the fuel efficiency and the output are increased but the noise and the vibration are decreased. In order to keep the performance of Electronic Diesel Control System, it is important to accurately control the fuel pressure. However, when the regulator of fuel pressure is not controlled properly, the failure phenomenons(starting failure, staring delay, accelerated failure, engine mismatch et al.) occur because the fuel pressure is not stabilize. In this study, effects on a fuel pressure, engine rotating speed according to the control rate of fuel-pressure regulator are investigated in order to analyzed the performance variation with failure of fuel-pressure regulator. As a result, when the control rate of a fuel-pressure regulator is 4%~6% lower than that of standard condition, the variation of engine's rpm and return fuel flow is increased, and the abnormal condition was occurred. Besides, it is possible to diagnose the failures on fuel-pressure regulator under these conditions.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.197-201
• /
• 1990

Emergence and growth of Potamogeton distinctus, Eleocharis kuroguwai, and Sagittaria pygmaea were examined at soil temperatures of 12, 15, 18, 22, 26, and $30^{\circ}C$ and 3 planting depth conditions. Optimum soil temperatures for emergence were 15-$22^{\circ}C$ 22-$26^{\circ}C$, and 18-$26^{\circ}C$ for P. distinctus, E. kurogueai, and S. pygmaea, respectively. Emergence was delayed and growth became poor in three species as planting depths were increased and this trend was more significant in E. kuroguwai.

• Smart Media Journal
• /
• v.11 no.9
• /
• pp.47-55
• /
• 2022

Quality control in the smart factory manufacturing process is an important factor. Currently, quality inspection of home appliance manufacturing parts produced by the mold process is mostly performed with the naked eye of the operator, resulting in a high error rate of inspection. In order to improve the quality competition, an automatic defect detection system was designed and implemented. The proposed system acquires an image by photographing an object with a high-performance scan camera at a specific location, and reads defective products due to scratches, dents, and foreign substances according to the vision inspection algorithm. In this study, the depth-based branch decision algorithm (DBD) was developed to increase the recognition rate of defects due to scratches, and the accuracy was improved.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.219-225
• /
• 2022

The textile industry in Korea, the dyeing sector is an energy-intensive sector and has low per-unit productivity due to its labor-intensive nature. If the defective rate of dyed fabrics is high, additional costs are incurred due to an increase in production cost due to re-dyeing. Therefore, the goal of the dyeing factory was to minimize the defect rate rather than to save energy. It was difficult to check the dyeing state of the fabric in real time due to the risk of accidents due to burns or pressure when dyeing in a high-temperature and high-pressure environment. In this paper, a complex sensor that can measure the exhaustion rate of dye solution in the dyeing machine using turbidity, pH, and conductivity sensors was proposed, and the experimental method and experimental results were analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1725-1728
• /
• 2009

This research developed process control device and FGV pattern generating device essential for full gate visual inspection to improve process so that defect detection capability may be maximized in specified environment. The devices developed in this research, which can be swiftly replaced in case loss or error occurs, are anticipated to improve module yield as well as maintain tact loss near '0'. In addition, as a result of mounting H/W and S/W system to control detailed operation sequence in production line and executing performance check and verification, detection rates were 98.1% and 99.1% respectively for pixel defect by tact and line defect, and yield of the entire module process including gate and visual level test increased up to 98.3%.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.3-5
• /
• 2022

본 연구는 VGGNet을 사용하여 광섬유 복합가공 지선 설비의 양/불량 판별을 수행한다. 광섬유 복합가공 지선이란, 전력선의 보호 및 전력 시설 간 통신을 담당하는 중요 설비로 고장 발생 전, 결함의 조기 발견 및 유지 관리가 중요하다. 현재 한국전력공사에서는 드론에서 촬영된 영상을 점검원이 이상 여부를 점검하는 방식이 주로 사용되고 있으나 이는 점검원의 숙련도, 경험에 따른 정확성 및 비용과 시간 측면에서 한계를 지니고 있다. 본 연구는 드론에서 촬영된 영상으로 VGGNet 기반의 양/불량 판정을 수행했다. 그 결과, 정확도 약 95.15%, 정밀도 약 96%, 재현율 약 95%, f1 score 약 95%의 성능을 확인하였다. 결과 확인 방법으로는 설명 가능한 인공지능(XAI) 알고리즘 중 하나인 Grad-CAM을 적용하였다. 이러한 광섬유 복합가공 지선 설비의 양/불량 판별은 점검원의 단순 작업에 대한 비용 및 점검 시간을 줄이며, 부가가치가 높은 업무에 집중할 수 있게 해준다. 또한, 고장 결함 발견에 있어서 객관적인 점검을 수행하기 때문에 일정한 점검 품질을 유지한다는 점에서 적용 가치가 있다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.589-592
• /
• 2006

상수도는 도시의 일상생활 및 제반 활동을 유지시키는 중요한 사회기반 시설임에도 불구하고 시설 확대 이외의 종합적 관리 대책이 제시되지 않아 시설 노후화 및 불량으로 인한 낭비 요소가 매우 높다. 이와 같은 문제를 해결하기 위해 이 논문에서는 상수도의 생산에서 각 수용가에서 사용되는 부분에 대한 다양한 성격의 데이터들을 데이터베이스화 하고 이에 대한 분석 및 평가를 통해 무효수량 발생 원인을 쉽게 찾아 신속하게 대응함으로써 적은 노력으로 유수율을 향상시킬 수 있는 소프트웨어 시스템의 개발을 목표로 한다. 이 논문에서 개발한 유수율 제고 시스템은 상수도 시설에 대한 직접 탐사 이전에 누수 및 무효수량 발생 원인을 정량적으로 분석 평가함으로써 적은 비용으로 유수율 향상에 크게 기여할 것으로 기대된다.

• Journal of Ginseng Research
• /
• v.32 no.3
• /
• pp.257-263
• /
• 2008

This study was carried out to obtained the basic information for seed coat dehiscence and seedling performance according to seed size of eight ginseng cultivars. Seed size was separated into four grade(upper 5.0, 5.0-4.7, 4.7-4.0, and under 4.0mm in diameter). Seed coat dehiscence and survival ratio of seedling were not affected by seed size. Aerial parts growth of seedling such as stem length, stem diameter, and leaf area of seedling were larger seed(upper 5.0 mm) better than those of small seeds(4.7-4.0, and under 4.0 mm in diameter). Also root part growths such as root diameter, and fresh weight were larger seed(upper 5.0 mm) higher than those of small seeds(4.7-4.0, and under 4.0 mm in diameter). However, root length was not affected by seed size. Growth status of aerial and root parts of 'unpoong' 'umpoong' and 'opoong' were better than those of other cultivars in each grade of seed sizes. The growth of characteristics of 'hunpoong' and 'hungsun' were less than those of other cultivars.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.290-293
• /
• 2004

본 연구는 S사의 카메라 뷰 파인더 부품으로 사용되는 Prism-B의 손폐율 감소를 위해 중심능선의 품질특성을 개선한 사례이다. 기존에는 중심능선 불량을 전자현미경을 통한 관찰에 의해 판단함으로써 계량적인 측정데이터를 확보하지 못하여 통계적인 분석이 어려웠으나, 본 사례에서는 대용특성을 이용하여 중심능선의 품질특성을 수치로 측정할 수 있는 방법을 먼저 개발함으로써 데이터의 분석과 공정의 개선을 체계적으로 진행하였다. 개선 방법은 6시그마 프로젝트 진행 로드맵을 따랐으며, 그 결과 손폐율을 개선 전 12%로부터 개선 후 0.00%로 거의 완벽하게 제거할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• v.8 no.2
• /
• pp.9-16
• /
• 1980

The problem of tauns having the characteristics of severe variations in quality and unequally distributed moisture content in veneer sheets after drying for plywood could be cured to a proper even moisture distribution by the peeling of veneers in a prolonged period. The poor gluability of tauns was improved by applicaton of increased resin content of glue in spreading. Combinations of tauns with lauan and kapur for plywood showed good shear strength.