• Journal of Biosystems Engineering
• /
• v.6 no.1
• /
• pp.28-38
• /
• 1981

A survey has been conducted to investigate the presents of breaks down and repair of power tiller for efficient use. Eight provinces were covered for this study. The results are summarized as follows. A. Frequency of breaks down. 1) Power tiller was breaken down 9.05 times a year and it represents a break down every 39.1 hours of use. High frequency of breaks down was found from the fuel and ignition system. For only these system, the number of breaks down were 2.02 and it represents 23.3% among total breaks down. It was followed by attachments, cylinder system, and traction device. 2) For the power tiller which was more than six years old, breaks down accured 37.7 hours of use and every 38.6 hours for the power tiller which was purchased in less than 2 years. 3) For the kerosene engine power tiller, breaks down occured every 36.8 hours of use, which is a higher value compared with diesel engine power tiller which break down every 42.8 hours of use. The 8HP kerosene engine power tiller showed higher frequency of break down compared with any other horse power tiller. 4) In October, the lowest frequency of break down was found with the value of once for every 51.5 hours of use, and it was followed by the frequency of break down in June. The more hours of use, the less breaks down was found. E. Repair place 1) 45.3% among total breaks down of power tiller was repaired by the owner, and 54.7% was repaired at repair shop. More power tiller were repaired at repair shop than by owner of power tiller. 2) The older the power tiller is, the higher percentage of repairing at the repair shop was found compared with the repairing by the owner. 3) Higher percentage of repairing by the owner was found for the diesel engine power tiller compared with the kerosene engine power tiller. It was 10 HP power tiller for the kerosene power tiller and 8 HP for the diesel engine power tiller. 4) 66.7% among total breaks down of steering device was repaired by the owner. It was the highest value compared with the percentage of repairing of any other parts of power tiller. The lowest percentage of repairing by owner was found for the attachments to the power tiller with the value of 26.5%. C. Cause of break down 1) Among the total breaks down of power tiller, 57.2% is caused by the old parts of power tiller with the value of 5.18 times break down a year and 34.7% was caused by the poor maintenance and over loading. 2) For the power tiller which was purchased in less than two years, more breaks down were caused by poor maintenance in comparison to the old parts of power tiller. 3) For the both 8-10 HP kerosene and diesel engine power tiller, the aspects of breaks down was almost the same. But for the 5 HP power tiller, more breaks down was caused by over loading in comparison to the old parts of power tiller. 4) For the cylinder system and traction device, most of the breaks down was caused by the old parts and for the fuel and ignition system, breaks down was caused mainly by the poor maintenance. D. Repair Cost 1) For each power tiller, repair cost was 34,509 won a year and it was 97 won for one hoar operation. 2) Repair cost of kerosene engine power tiller was 40,697 won a year, and it use 28,320 won for a diesel engine power tiller. 3) Average repair cost for one hour operation of kerosene engine power tiller was 103 won, and 86 won for a diesel engine power tiller. No differences were found between the horse power of engines. 4) Annual repair cost of cylinder system was 13,036 won which is the highest one compared with the repair cost of any other parts 362 won a year was required to repair the steering device, and it was the least among repair cost of parts. 5) Average cost for repairing the power tiller one time was 3,183 won. It was 10,598 won for a cylinder system and 1,006 won for a steering device of power tiller. E. Time requirement for repairing by owner. 1) Average time requirements for repairing the break down of a power tiller by owner himself was 8.36 hours, power tiller could not be used for operation for 93.58 hours a year due to the break down. 2) 21.3 hours were required for repairing by owner himself the break down of a power tiller which was more than 6 years old. This value is the highest one compared with the repairing time of power tiller which were purchased in different years. Due to the break down of the power tiller, it could not be used for operation annually 127.13 hours. 3) 10.66 hours were required for repairing by the owner himself a break down of a diesel engine power tiller and 6.48 hours for kerosene engine power tiller could not be used annually 99.14 hours for operation due to the break down and it was 88.67 hour for the diesel engine power tiller. 4) For both diesel and kerosene engine power tiller 8 HP power tiller required the least time for repairing by owner himself a break down compared with any other horse power tiller. It was 2.78 hours for kerosene engine power tiller and 8.25 hours fur diesel engine power tiller. 5) For the cylinder system of power tiller 32.02 hours were required for repairing a break down by the owner himself. Power tiller could not be used 39.30 hours a year due to the break down of the cylinder system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.17
• /
• pp.1-44
• /
• 1974

These studies were made at Suwon in 1972 and at Suwon, Iri, and Kwangju in 1973 to investigate grain filling process and variation of grain quality of NB 68513 and Caprock as hard red winter wheat, Suke ＃169 as soft red winter wheat variety and Yungkwang as semi-hard winter variety, grown under-three different fertilizer levels and seeding dates. Other experiments were conducted to find the effects of temperature, humidity and light intensity on the grain filling process and grain quality of Yungkwang and NB 68513 wheat varieties. These, experiments were conducted at Suwon in 1973 and 1974. 1. Grain filling process of wheat cultivars: 1) The frequency distribution of a grain weight shows that wider distribution of grain weight was associated with large grain groups rather than small grain group. In the large grain groups, the frequency was mostly concentrated near mean value, while the frequency was dispersed over the values in the small grain group. 2) The grain weight was more affected by the grain thickness and width than by grain length. 3) The grain weight during the ripening period was rapidly increased from 14 days after flowering to 35 days in Yungkwang and from 14 days after flowering to 28 days in NB 68513. The large grain group, Yungkwang was rather slowly increased and took a longer period in increase of endosperm ratio of grain than the small grain group, NB 68513. 4) In general, the 1, 000 grain weight was reduced under high temperature, low humidity, while it was increased under low temperature and high humidity condition, and under high temperature and humidity condition. The effect of shading on grain weight was greater in high temperature than in low temperature condition and no definite tendency was found in high humidity condition. 5) The effects of temperature, humidity and shading on 1, 000 grain weight were greater in large-grain group, Yungkwang than in small grain group, NB 68513. Highly significant positive correlation was found between 1, 000 grain weight and days to ripening. 6) The 1, 000 grain weight and test weight were increased more or less as the fertilizer levels applied were increased. However, the rate of increasing 1, 000 grain weight was low when fertilizer levels were increased from standard to double. The 1, 000 grain weight was high when planted early. Such tendency was greater in Suwon than in Kwangju or Iri area. 2. Milling quality: 7) The milling rate in a same group of varieties was higher under the condition of low temperature, high humidity and early maturing culture which were responsible for increasing 1, 000 grain weight. No definite relations were found along with locations. 8) In the varieties tested, the higher milling rate was found in large grain variety, Yungkwang, and the lowest milling rate was obtained from Suke ＃ 169, the small grain variety. But the small grained hard wheat variety such as Caprock and NB 68513 showed higher milling rate compared with the soft wheat variety, Suke ＃ 169. 9) There were no great differences of ash content due to location, fertilizer level and seeding date while remarkable differences due to variety were found. The ash content was high in the hard wheat varieties such as NB 68513, Caprock and low in soft wheat varieties such as Yungkwang and Suke ＃ 169. 3. Protein content: 10) The protein content was increased under the condition of high temperature, low humidity and shading, which were responsible for reduction of 1, 000 grain weight. The varietal differences of protein content due to high temperature, low humidity and shading conditions were greater in Yungkwang than in NB 68513. 11) The high content of protein in grain within one to two weeks after flowering might be due to the high ratio of pericarp and embryo to endosperm. As grains ripen, the effects of embryo and pericarp on protein content were decreased, reducing protein content. However, the protein content was getting increased from three or four weeks after flowering, and maximized at seven weeks after flowering. The protein content of grain at three to four weeks after flowering increased as the increase of 1, 000 grain weight. But the protein content of matured grain appeared to be affected by daily temperature on calender rather than by duration of ripening period. 12) Highly significant positive correlation value was found between the grain protein content and flour protein content. 13) The protein content was increased under the high level of fertilizers and late seeding. The local differences of protein content were greater in Suwon than in Kwangju and Iri. 14) Protein content in the varieties tested were high in Yungkwang, NB 68513 and Caprock, and low in Suke ＃ 169. However, variation in protein content due to the cultural methods was low in Suke ＃ 169. 15) Protein yield per unit area was increased in accordance with increase of fertilizer levels and early maturing culture. However, nitrogen fertilizer was utilized rather effectively in early maturing culture and Yungkwang was the highest in protein yield per unit area. 4. Physio-chemical properties of wheat flour: 16) Sedimentation value was higher under the conditions of high temperature, low humidity and high levels of fertilizers than under the conditions of low temperature, high moisture and low levels of fertilizers. Such differences of sedimentation values were more apparent in NB 68513 and Caprock than Yungkwang and Suke ＃ 169. The local difference of sedimentation value was greater in Suwon than in Kwangju and Iri. Even though the sedimentation value was highly correlated with protein content of grain, the high humidity was considered one of the factors affecting sedimentation value. 17) Changes of Pelshenke values due to the differences of cultural practices and locations were generally coincident with sedimentation values. 18) The mixing time required for mixogram was four to six minutes in NB 68513, five to seven minutes in Cap rock. The great variation of mixing time for Yungkwang and Suke ＃ 169 due to location and planting conditions was found. The mixing height and area were high in hard wheat than in soft wheat. Variation of protein content due to cultural methods were inconsistent. However, the pattern of mixogram were very much same regardless the treatments applied. With this regard, it could be concluded that the mixogram is a kind of method expressing the specific character of the variety. 19) Even though the milling property of NB 68513 and Caprock was deteriorated under either high temperature and low humidity of high fertilizer levels and late seeding conditions, baking quality was better due to improved physio-chemical properties of flour. In contrast, early maturing culture deteriorated physio-chemical properties, milling property of grain and grain protein yield per unit area was increased. However, it might be concluded that the hard wheat production of NB 68513 and Caprock for baking purpose could be done better in Suwon than in Iri or Kwangju area. 5. Interrelationships between the physio-chemical characters of wheat flour: 20) Physio-chemical properties of flour didn't have direct relationship with milling rate and ash content. Low grain weight produced high protein content and better physio-chemical flour properties. 21) In hard wheat varieties like NB 68513 and Caprock, protein content was significantly correlated with sedimentation value, Pelshenke value and mixing height. However, gluten strength and baking quality were improved by the increased protein content. In Yungkwang and Suk ＃ 169, protein content was correlated with sedimentation value, but no correlations were found with Pelshenke value and mixing height. Consequently, increase of protein content didn't improve the gluten strength in soft wheat. 22) The highly significant relationships between protein content and gluten strength and sedimentation . value, and between Pelshenke value, mixogram and gluten strength indicated that the determination of mixogram and Pelshenke value are useful for de terming soft and hard type of varieties. Determination of sedimentation value is considered useful method for quality evaluation of wheat grain under different cultural practices.

• Korean journal of food and cookery science
• /
• v.17 no.1
• /
• pp.43-54
• /
• 2001

This study was to investigate the behavior related to health, food habits, food consumption pattern and nutrient intakes of female students who residing in dormitory(self cooking) according to BMI(Body Mass Index). This study was carried out by questionnaired on June, 2000. Three hundred nine students were answered. The results were as follows: 1. The means of height, weight and BMI were 162.37$\pm$4.36cm, 52.48$\pm$5.54kg and 19.89$\pm$1.89. Under 20 of BMI among students were 53.1% and 20-25 of BMI were 46.9% of students. 2. In the self recognition of body shape, 63.4% of under weight subjects answered that their weight were normal. 73.1% of normal weight regard themselves more obese than their actual body shape normally shows. 51.2% of under weight subjects had attempted to control their weight. This results suggest that their weight control attempts were unnecessary. 3. 81.4% of subjects were answered irregular meals regardless BMI. 89.6% of subjects skipped breakfast. The main reasons were due to lack of time or not to eat proper food. Under weight subjects had less snack than normal weight subjects did(p '||'&'||'lt; 0.05). Normal weight subjects had more bun and cake than under weight subjects(p '||'&'||'gt; 0.05). 4. The consumption of vegetables and fruits were low regardless BMI. Mean energy, protein, Fe, Vit A, B$_1$, B$_2$, niacin, Vit C were above 75% of RDA, except calcium, in subjects. This study suggest that a comprehensive nutrition education program is need for college student in dormitory to improve their eating habits about skipping meal and breakfast and to increase the consumption of vegetables and fruits.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.3
• /
• pp.385-392
• /
• 2012

This study was conducted to find out the optimum cropping system for the stable production of forage crops in the newly reclaimed land located at Gwanghwal and Gyehwa region of Saemangum reclaimed tide land from October, 2009 to October, 2011. Whole crop barley (WCB), Rye, Italyan-ryegrass (IRG) as winter crops and Corn, Sorghum${\times}$sudangrass hybrid (SSH) as summer crops were cultivated. Soil chemical properties, nutrient uptake, feed value, growth and yield were examinated. The testing soil was showed saline alkali soil where the contents of organic matter, available phosphate and exchangeable calcium were very low, while exchangeable sodium and magnesium were higher. Changes of soil salinity during the growing season of forage crops were less than 0.2%, and the growth of forage crops was not affected by salt injury. Standing rates of winter crops were higher in the order of Rye, WCB, and IRG, while the dry matter yield of winter crops was higher in the order of IRG, Rye and WCB. The highest crude protein (CP) content was recorded in IRG, and total digestive nutrients (TDN) contents were increased in the order of WCB, IRG, and Rye. The TDN content was higher in corn, whereas other feed value was higher in SSH. The content of mineral nutrients on stem, leaf and grain in IRG, Corn were high. After experiment pH was lowed, contents of exchangeable magnesium, sodium and organic matter were decreased while contents of total nitrogen, available phosphate and exchangeable potassium, calcium were increased. Winer crops and summer crops after continually cultivating in cropping system, fresh matter yield increased, compared to WCB-Corn (74,740 kg $ha^{-1}$), IRG-SSH 10%, IRG-Corn 7%, Rye-SSH 6%, Rye-Corn and WCB-SSH 3%. Dry matter yield increased, compared to WCB-Corn (20,280 kg $ha^{-1}$), IRG-SSH 7%, Rye-SSH 6%, IRG-Corn/Rye-Corn/WCB-SSH 3%. The TDN yield increased, compared to WCB-Corn (13,830 kg $ha^{-1}$), IRG-SSH 2%, WCB-SSH and IRG-Corn 1%. Therefore, we suggest that the crop combination of IRG-SSH and WCB-SSH would be preferred for silage stable production.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.189-196
• /
• 2003

In this study, the vertical opening of the non-float midwater pair trawl net was maintained by controlling the length of upper warp. This was because the head rope was able to be kept linearly and the working depth was not nearly as changed with the variation of flow speed as former experiments in this series of studies have demonstrated. We confirmed that the opening efficiency of the non-float midwater pair trawl net was able to be developed according to the increase in front weight and wing-end weight. In this study, we described the opening efficiency of the non-float midwater pair trawl net according to the variation of front weight and wing-end weight obtained by model experiment in circulation water channel. We compared the opening efficiency of the proto type with that of the non-float type. The results obtained can be summarized as follows：1. The hydrodynamic resistance was almost increased linearly in proportion to the flow speed and was increased in accordance with the increase in front weight and wing-end weight. The increasing rate of hydrodynamic resistance was displayed as an increasing tendency in accordance with the increase in flow speed. 2. The net height of the non-float type was almost decreased linearly in accordance with the increase in flow speed. As the reduced rate of the net height of the non-float type was smaller than that of the net height of the proto type against increase of flow speed, the net height of the non-float type was bigger than that of the proto type over 4.0 knot. The net width of the non-float type was about 10 m bigger than that of the proto type and the change rate of net width varied by no more than 2 m according to the variation of the front weight and wing-end weight. 3. The mouth area of the non-float type was maximized at 1.75 ton of the front weight and 1.11 ton of the wing-end weight, and was smaller than that of the proto type at 2.0∼3.0 knot, but was bigger than that of the proto type at 4.0∼5.0 knot. 4. The filtering volume was maximized at 3.0 knot in the proto type and at 4.0 knot in the non-float type. The optimal front weight was 1.40 ton.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.147-157
• /
• 1973

I. The effect of excessive soil moisture(at the time of germination) on germination of barley and crop damage of herbicides was investigated. Machete(Butachlor) and TOK(Nitrofen) were treated, respectively, at the rate of 150g ai/10a on each pot whose different soil moisture content was controlled by suppling 30, 40, 50 and 60ml of water per 100gr of air-dried soil, respectively. The results are summarized as follows: 1. Excessive soil moisture beyond field moisture capacity caused great inhibition, from 20 to 100%, of the germination of barley even at untreated pots(check pots). Also, further development of root and growth of barley were greatly inhibited even though the seeds germinated. 2. The same tendency in inhibition of germination and growth as at untreated pots was observed at treated pots, too. As a whole, however, the damage were heavier at treated pots. II. Wanju naked spring barley was seeded on four different soils and covered with soil to a depth of 1 em, and then Machete, TOK, Saturn and HE-314 were treated at the rate of 180, 150 and 200, 150, and 250g ai/10a, respectively, and the effect of soil texture on crop damage of the herbicides was investigated. The results are summarized as follows: 1. Machete(emulsion and granule, at 180g ai/10a) The degree of crop damage was quite different from one soil texture to another: while almost no crop damage was observed on a clay loam soil regardless of the type of formulation, the damage became heavier as the soil texture became sandier as sandy clay loam, volcanic ash loam and sandy loam, and great inhibition of growth was observed on sandy loam soil. In general heavier damage was caused by the application of emulsion than by granular formulation. 2. TOK(Wettable powder, at 150, 250g ai/l0a) Almost the same tendency as in the application of Machete was observed, and the damage became heavier as the application rate increased. 3. Saturn(at l50g ai/l0a) No great difference in crop damage among soil textures was observed. 4. HE-3l4(at 250g ai/l0a) Almost no difference in crop damage among soil textures was observed at this rate of 250g ai/l0a. III. To study a difference of crop damage on soil covering depth(4 levels), 9 herbicides(TOK, MO, HE-3l4, Machete, Saturn, Simetryne, Simazine, Gesaran, Lorox) were treated on the pots with two different soils, and the effect of soil covering depth on crop damage of the herbicides was investigated. The results obtained in this experiment are summarized as follows: Light Clay Soil 1. The growth of barley in relation to depth of soil covering at check pots followed the order vigorous to weak; lcm>1.5cm>0.5cm>0cm. And in case of 0 and 0.5cm covering the growth of barley was very poor. 2. The damage at 0 and 0.5cm covering at treated pots was very severe, but Saturn, Machete, MO and TOK at 100 to l50g ai/l0a, respectively and He-3l4 at 250 to 375g ai/l0a were relatively safe to barley at the depths of lcm and above. 3. Simazine, Lorox and Simetryne caused slight damage even at 1.5cm covering. Sandy Loam Soil The growth of barley in relation to depth of soil covering at untreated pots followed the order, from vigorous to weak; 1.5cm 0.5cm 3cm 5cm. While MO was safe to barley at 1.5cm covering, for other chemicals more than 3cm covering was require for safe use. Machete and Saturn at 100g ai/l0a, and HE-3l4 at 250g ai/l0a was relatively safe at more than 3cm covering. Simazine, Lorox, Simetryne and Gesaran were unsafe on sandy soil regardless of covering depth.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.s02
• /
• pp.45-65
• /
• 1989

The Korean peninsular having the complexity of the photography and variability of climate is located within passing area of a lots of typhoon occurring from the southern islands of Philippines. So, there are various patterns of wind and flooding damages in paddy field occuring by the strong wind and the heavy rain concentrated during the summer season of rice growing period in Korea. The wind damages to rice plants in Korea were mainly caused by saline wind, dry wind and strong wind when typhoon occurred. The saline wind damage having symptom of white head or dried leaves occurred by 1.1 to 17.2 mg of salt per dry weight stuck on the plant which was located at 2. 5km away from seashore of southern coastal area during the period(from 27th to 29th, August, 1986) of typhoon &Vera& accompanying 62-96％ of relative humidity, more than 6 m per second of wind velocity and 22.5 to 26.4$^{\circ}C$ of air temperature without rain. Most of the typhoons accompanying 4.0 to 8. 5m per second of wind and low humidity (lesp an 60％) with high temperature in the east coastal area and southen area of Korea. were changed to dry and hot wind by the foehn phenomenon. The dry wind damages with the symptom of the white head or the discolored brownish grain occurred at the rice heading stage. The strong wind caused the severe damages such as the broken leaves, cut-leaves and dried leaves before heading stage, lodging and shattering of grain at ripening stage mechanically during typhoon. To reduce the wind damages to rice plant, cultivation of resistant varieties to wind damages such as Sangpoongbyeo and Cheongcheongbyeo and the escape of heading stage during period of typhoon by accelerating of heading within 15th, August are effective. Though the flood disasters to rice plant such as earring away of field, burying of field, submerging and lodging damage are getting low by the construction of dam for multiple purpose and river bank, they are occasionally occurred by the regional heavy rain and water filled out in bank around the river. Paddy field were submerged for 2 to 4 days when typhoon and heavy rain occurred about the end of August. At this time, the rice plants that was in younger growing stage in the late transplanting field of southern area of Korea had the severe damages. Although panicles of rice plant which was in the meiotic growing stage and heading stage were died when flooded, they had 66％ of yield compensating ability by the upper tilling panicle produced from tiller with dead panicle in ordinary transplanting paddy field. It is effective for reduction of flooding damages to cultivate the resistant variety to flooding having the resistance to bacterial leaf blight, lodging and small brown planthopper simultaneously. Especially, Tongil type rice varieties are relatively resistant to flooding, compared to Japonica rice varieties. Tongil type rice varieties had high survivals, low elongation ability of leaf sheath and blade, high recovering ability by the high root activity and photosynthesis and high yield compensating ability by the upper tillering panicle when flooded. To minimize the flooding and wind damage to rice plants in future, following research have to be carried out; 1. Data analysis by telemetering and computerization of climate, actual conditions and growing diagnosis of crops damaged by disasters. 2. Development of tolerant varieties to poor natural conditions related to flooding and wind damages. 3. Improvement of the reasonable cropping system by introduction of other crops compensating the loss of the damaged rice. 4. Increament of utilization of rice plant which was damaged.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.1
• /
• pp.57-70
• /
• 2003

Background : Small cell lung cancer represents approximately 20% of all carcinomas of the lung, and is recognized as having a poor long term outcome compared to non-small cell lung cancer. Therefore, this study investigated the prognostic factors in small cell lung cancer patients in order to improved the survival rate by using the proper therapeutic methods. Material and method : The clinical data from 394 patients who diagnosed with small cell lung cancer and treated from 1993 to 2001 at the Kosin University Gospel Hospital, were analyzed. Result : There were 314 male patients (79.7%), and 80 female patients (20.3%). The number of those with limited disease was 177 (44.9%), and the number of those with extensive disease was 217 (55.1%). Overall, 366 out of 394 enrolled patients had died. The median survival time was 215 days (95% CI : 192-237days). The disease stage, Karnofsky performance state, 5% body weight loss for the recent 3 months, chemotherapy regimens, and the additive chest radiotherapy were identified as being statistically significant factors for the survival time. The median survival times of the supportive care group, one anticancer therapy, and two or more treatment groups were 17 days, 211 days, and 419 day, respectively (p<0.001). These data emphasize the importance of anticancer treatment to improve survival time for patients. The group of concurrent chemoradiotherapy (30 patients) showed significantly longer survival time than the group given sequential chemoradiotherapy (55 patients) (528 days versus 373 days, p=0.0237). The favorable prognostic factors of laboratory study were groups of leukocyte =8,000/mm3, ALP=200 U/L, LDH=450 IU/L, NSE=15 ng/mL, s-GOT=40 IU/L. In extensive disease, there was no difference according to the number of metastatic site. However, the median survival time of patients with ipsilateral pleural effusion had longer than patients having other metastatic sites. According to the survey periods, three groups were divided into 1993-1995, 1996-1998, and 1999-2001. The median survival time was significantly prolonged after 1999 in comparison to previous groups (177 days, 194 days, 289 days, p=0.001, 0.002, respectively). Conclusion: Disease stage and 5% body weight loss for recent 3 months at diagnostic state were significant prognostic factors. In addition, the performance status, serum ALP, LDH, NSE, CEA levels also appear to be prognostic factors. The survival time of those patients with small cell lung cancer has been prologned in recent years. It was suggested that the used of the EP (etoposied and cisplatin) chemotherapy method and concurrent chemoradiotherapy for patients with a limited stage contributed to the improved survival time.

• Tuberculosis and Respiratory Diseases
• /
• v.49 no.6
• /
• pp.740-751
• /
• 2000

Background : Moxifloxacin is a newly developed drug which is more potent and safe compared to previous fluoroquinolones. This drug effectively eradicates organisms such as beta-lactamase-producing or other resistant bacteria. Moxifloxacin is known to be effective in treating respiratory infections such as Streptococcus pneumoniae, Haemophilus influenzae, Moraxella catarrhalis, Chlamydia pneumoniaeme, Legionella spp. and Mycoplasma pneumoniae. Methods : In a multicenter, randomized, open, comparative study, the efficacy and safety of oral moxifloxacin taken 400 mg once a day and clarithromycin taken 500 mg twice daily for 7 days were compared for the treatment of Korean patients with acute exacerbations of chronic bronchitis. Results : A total of 170 patients were enrolled, and they were divided into two groups: 87 in the moxifloxacin group and 83 in the clarithromycin group. Of those enrolled, 76 (35 for bacteriologic efficacy) in the moxifloxacin group and 77 (31 for bacteriologic efficacy) in the clarithromycin group were included in the efficacy analysis. All were included in the safety analysis. Clinical success was noted in 70 (92.1%) of 76 moxifloxacin-treated patients and 71 (92.2%) of 77 clarithromycin-treated patients. Bacteriologic success rate seemed to be higher in moxifloxacin group (73.5%) than in clarithromycin group (54.8%), but statistically insignificant (p=0.098). Drug susceptibility among organisms initially isolated was higher in moxifloxacin group on Streptococcus pneumoniae, Pseudomonas aeruginosa, Klebsiella pneumoniae (p<0.001). Adverse events were reported by 12.8% of 86 patients receiving moxifloxacin and 21.7% of 83 patients receiving clarithromycin. Headache (4.7% vs 4.8%, moxifloxacin group vs clarithromycin group, respectively) and indigestion (2.3% vs 6.0%, moxifloxacin group vs clarithromycin group, respectively) were the most frequent side effects in the two groups. Conclusion : This study demonstrated that for the treatment of acute exacerbations of chronic bronchitis a 7-day course of moxifloxacin 400 mg od was clinically equivalent and microbiologically superior to clarithromycin 500 mg bid.

• Proceedings of the KSEEG Conference
• /
• 2001.05b
• /
• pp.42-63
• /
• 2001

The detail survey on the Songsanri tomb site including the Muryong royal tomb was carried out during the period from May 1 , 1996 to April 30, 1997. A quantitative analysis was tried to find changes of tomb itself since the excavation. Main subjects of the survey are to find out the cause of infiltration of rain water and groundwater into the tomb and the tomb site, monitoring of the movement of tomb structure and safety, removal method of the algae inside the tomb, and air controlling system to solve high humidity condition and dew inside the tomb. For these purposes, detail survery inside and outside the tombs using a electronic distance meter and small airplane, monitoring of temperature and humidity, geophysical exploration including electrical resistivity, geomagnetic, gravity and georadar methods, drilling, measurement of physical and chemical properties of drill core and measurement of groundwater permeability were conducted. We found that the center of the subsurface tomb and the center of soil mound on ground are different 4.5 meter and 5 meter for the 5th tomb and 7th tomb, respectively. The fact has caused unequal stress on the tomb structure. In the 7th tomb (the Muryong royal tomb), 435 bricks were broken out of 6025 bricks in 1972, but 1072 bricks are broken in 1996. The break rate has been increased about 250% for just 24 years. The break rate increased about 290% in the 6th tomb. The situation in 1996 is the result for just 24 years while the situation in 1972 was the result for about 1450 years. Status of breaking of bircks represents that a severe problem is undergoing. The eastern wall of the Muryong royal tomb is moving toward inside the tomb with the rate of 2.95 mm/myr in rainy season and 1.52 mm/myr in dry season. The frontal wall shows biggest movement in the 7th tomb having a rate of 2.05 mm/myr toward the passage way. The 6th tomb shows biggest movement among the three tombs having the rate of 7.44mm/myr and 3.61mm/myr toward east for the high break rate of bricks in the 6th tomb. Georadar section of the shallow soil layer represents several faults in the top soil layer of the 5th tomb and 7th tomb. Raninwater flew through faults tnto the tomb and nearby ground and high water content in nearby ground resulted in low resistance and high humidity inside tombs. High humidity inside tomb made a good condition for algae living with high temperature and moderate light source. The 6th tomb is most severe situation and the 7th tomb is the second in terms of algae living. Artificial change of the tomb environment since the excavation, infiltration of rain water and groundwater into the tombsite and bad drainage system had resulted in dangerous status for the tomb structure. Main cause for many problems including breaking of bricks, movement of tomb walls and algae living is infiltration of rainwater and groundwater into the tomb site. Therefore, protection of the tomb site from high water content should be carried out at first. Waterproofing method includes a cover system over the tomvsith using geotextile, clay layer and geomembrane and a deep trench which is 2 meter down to the base of the 5th tomb at the north of the tomv site. Decrease and balancing of soil weight above the tomb are also needed for the sfety of tomb structures. For the algae living inside tombs, we recommend to spray K101 which developed in this study on the surface of wall and then, exposure to ultraviolet light sources for 24 hours. Air controlling system should be changed to a constant temperature and humidity system for the 6th tomb and the 7th tomb. It seems to much better to place the system at frontal room and to ciculate cold air inside tombs to solve dew problem. Above mentioned preservation methods are suggested to give least changes to tomb site and to solve the most fundmental problems. Repairing should be planned in order and some special cares are needed for the safety of tombs in reparing work. Finally, a monitoring system measuring tilting of tomb walls, water content, groundwater level, temperature and humidity is required to monitor and to evaluate the repairing work.