• Journal of the Mineralogical Society of Korea
• /
• v.22 no.4
• /
• pp.371-383
• /
• 2009

Crystallinity and textural relations, which are crucial in terms of the quality concept of high-purity limestone, have not been effectively applicable to the limestone evaluation as crude ore due to the difficulties in precise measurements. To overcome the above, as a new method of ore characterization, a measurement of shape factor and grain boundary frequency utilizing the image analysing system was adopted in this study. Some domestic limestones used for lime manufacturing were investigated by such a quality evaluation method, and its results are discussed and correlated each other samples. As the result, even though calcite contents of crude ore, i.e., limestone grade and its crystal size are similar, quality of manufactured lime is remarkably different depending on the degree of shape factor and grain boundary frequency. In other words, as the more irregular in crystal shape and the higher the grain boundary frequency, the manufactured quick lime became more superior in all terms of lime quality such as rate of calcination, porosity, reactivity, sintering and decrepitation effect. However, because the quick lime become easily overheated in case of relatively higher degree in shape factor and grain boundary effect, a technology minimizing heating time is necessary for the manufacturing of high quality lime. In limestone industry, such a ore characterization method will be much more reasonable than the conventional method by measurement of mean size, because the method may collectively comprise crystal shape and other textural factors which can not be numerically evaluated in the past.

• The Journal of Engineering Geology
• /
• v.14 no.4 s.41
• /
• pp.461-468
• /
• 2004

In order to characterize hydraulic property dependant on join roughness in rock mass, this study computed permeability coefficients on each range of joint roughness coefficient (JRC) suggested by Barton(1976). For a quantitative analysis of roughness components spectral analysis using the fast fourier transform was performed to select effective frequencies on each PC range. The results of spectral analyses show that low ranges of the JRC are mainly composed of low frequency domain, while high ranges of the JRC have dominant components at high frequency domain. The inverse Fourier transform made it possible to generate joint models of each JRC range using the effective frequencies of roughness spectrum. The homogenization analysis was applied to calculate permeability coefficient at homogeneous microscale, and then, computes a homogenized permeability coefficient (C-permeability coefficient) at macro scale. Therefore, it is possible to analyze accurate characteristics of permeability reflected with local effect of facture geometry. According to the calculation results, permeability coefficients were distributed between $10^{-3}m/sec\;and\;10^{-4}/sec$. In cases of sheared joint models permeability coefficients were plotted between $10^{-4}m/sec\;and\;10^{-5}/sec$, showing irregular distribution of permeability coefficients on each IRC range. The differences of permeability coefficients for the same aperture models or for the sheared joint models indicate that changes of roughness pattern influence on permeability coefficients. Therefore, the effect of joint roughness should be considered to characterize hydraulic properties in rock joints.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.16-22
• /
• 2010

Electrocardiogram(ECG) analysis and arrhythmia recognition are critical for diagnosis and treatment of ill patients. Cardiac arrhythmia is a condition in which heart beat may be irregular and presents a serious threat to the patient recovering from ventricular tachycardia (VT) and ventricular fibrillation (VF). Other arrhythmias like atrial premature contraction (APC), Premature ventricular contraction (PVC) and superventricular tachycardia (SVT) are important in diagnosing the heart diseases. This paper presented new method to classify various arrhythmias contrary to other techniques which are limited to only two or three arrhythmias. ECG is decomposed into Intrinsic Mode Functions (IMFs) by Empirical Mode Decomposition (EMD). Burg algorithm was performed on IMFs to obtain AR coefficients which can reduce the dimension of feature vector and utilized as Multi-class SVM inputs which is basically extended from binary SVM. We chose optimal parameters for SVM classifier, applied to arrhythmias classification and achieved the accuracies of detecting NSR, APC, PVC, SVT, VT and VP were 96.8% to 99.5%. The results showed that EMD was useful for the preprocessing and feature extraction and multi-class SVM for classification of cardiac arrhythmias, with high usefulness.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.1
• /
• pp.20-29
• /
• 1991

A fundamental assumption in conventional linear predictive coding (LPC) analysis procedure is that the input to an all-pole vocal tract filter is white process. In the case of periodic inputs, however, a pitch bias error is introduced into the conventional LP coefficient. Multi-pulse (MP) LP analysis can reduce this bias, provided that an estimate of the excitation is available. Since the prediction error of conventional LP analysis can be modeled as the sum of an MP excitation sequence and a random noise sequence, we can view extracting MP sequences from the prediction error as a classical detection and estimation problem. In this paper, we propose an algorithm in which the locations and amplitudes of the MP sequences are first obtained by applying a likelihood ratio test (LRT) to the prediction error, and LP coefficients free of pitch bias are then obtained from the MP sequences. To verify the performance enhancement, we iterate the above procedure with adaptive threshold at each step.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.93-101
• /
• 2016

Reservoir area and reservoir capacity must be evaluated for reservoir management such a water supply, water-purity control and so on. In this paper, the reservoir area and reservoir capacity according to the level of storage range of water(149~156 El.m) could be calculated by using TIN data model of study area, Gyoyeon reservoir, TIN data model was made of DSM which was created by using UAV and GCP survey. From the results of applying the various functions to reservoir area and capacity, reservoir area and reservoir capacity according to the level of storage range of water showed the highest coefficient of determination of 0.97 in fourth-order polynomial, and 0.99 in second-order polynomial, respectively. Thus, it could be expected the efficient reservoir management by estimating reservoir area and capacity curve equation through UAV photogrammetry.

• Journal of Korea Water Resources Association
• /
• v.43 no.3
• /
• pp.283-294
• /
• 2010

The objective of this study is to develop an accurate and stable dynamic water quality model which is capable of reflecting various flows and irregular cross sections and handling numerical oscillations under the low flow conditions. In order to solve the oscillation problem under the low flow conditions, diffusive wave method was applied to the low flow condition in developing a hydraulic model, DyHYD. DyQUAL is also developed as a water quality model to calculate up to 12 water quality variables including autochthonous BOD, water temperature, DO, TN and TP. The developed model is applied to both hypothetical river channels and actual Nakdong river watershed. Additionally, the applicability and reliability of the models are verified by comparing simulation results with observed values. Nash-Sutcliffe coefficients are estimated by comparison between simulation results and observed values. In the calibration and verification process, the coefficients varies from 0.391 to 0.591 and 0.704 to 0.902 for discharge, BOD, TN and TP, respectively.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.4
• /
• pp.73-81
• /
• 1994

The source and source/dipole distribution methods using 3-dimensional panel method have been widely used for ship motion analysis. When these methods are used, large errors in the predicted hydrodynamic coefficients are introduced around the irregular frequencies caused by the resonance of imaginary internal flow. Therefore, the irregular frequencies need to be removed for an accurate prediction of ship motion. This paper adopts 3-dimensional translating and oscillating Green function derived by Wu. The adaptive integration method, stretching transform and stationary phase method are used for the calculation of the calculation of Green function and the integral equation is derived by distributing the Green function n ship surface and inner free-surface. The condition of zero normal velocity, that is, wall condition on inner free-surface has been successfully used for the removal of irregular frequencies in oscillating problems. The calculations are carried out for series 60($C_B=0.7$) vessel and the results are compared with those of other theoretical analyses and experiment.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.231-231
• /
• 2021

하천 및 하천시설물 관리 등을 위해서는 유역에서 하천으로 유출되는 유사량 파악이 필요하다. 현재 유사량측정은 하천에서 여러 개(3~7개)의 측선에서 부유사채취기를 이용하여 측정하여 농도를 분석하여 유사량을 산정하게 된다. 본 연구는 유량측정 기법 중 최근 자동유량측정기술에 활용하는 지표유속법(index velocity method)을 부유사량 측정에 적용하고 검토하였다. 지표법(index method) 적용 방법은 여러 개의 측선에서 측정된 부유사농도와 평균농도와의 관계를 분석하고, 평균농도와 가장 상관성이 높은 측선의 부유사농도를 지표 부유사농도로 설정하여 지표부유사 농도와 평균부유사농도와의 관계식을 개발하여 부유사량 산정에 활용하였다. 대상하천은 주천강에 위치한 영월군(주천교) 지점을 선정하였으며, 2020년 주요 홍수사상에서 27개의 부유사 측정성과를 확보하였다. 부유사 측정을 위하여 5개의 측선에서 부유사를 측정하였고, 부유사농도 규모는 2.20~373.20mg/ℓ이다. 평균부유사농도와 가장 상관성(상관계수 0.9988)이 높은 4번 측선의 부유사농도를 지표부유사농도로 설정하고 평균부유사농도와 지표부유사농도의 관계식을 개발하였다. 그 결과 지표관계식의 결정계수(R²)는 0.9977로 매우 높게 산정되었으며, 실측 평균부유사농도와 계산 평균부유사농도의 편차율은 평균 26.71%(0.60~103.26%)로 분석되었다. 편차율은 상대적으로 부유사농도가 낮은 성과에서 높았으며, 부유사농도가 10mg/ℓ 이상에서는 편차율이 14.81%로 1/2 가까이 줄어들었다. 즉 유량이 적은 경우 흐름 및 부유사가 하천의 일부구간으로 불규칙하게 편중되거나 흐름 전체적으로 확산되지 않아 편차율이 높게 산정되는 것으로 판단된다. 이러한 결과를 볼 때 홍수시 부유사농도의 지표법을 이용한 부유사량 산정이 가능 할 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1C
• /
• pp.27-35
• /
• 2010

Instrumented steel sheet piles being driven by vibratory pile driver were installed in granular soil deposit and behaviors of the sheet piles were investigated. One of the instrumented steel sheet pile was installed without clutch and the other was installed with clutch. Sheet pile with clutch means that of installed in connection with pre-installed sheet pile. Penetration rates of sheet piles measured from depth measuring drum has shown that interlock friction had great effect on penetration speed of sheet pile. Clutch friction shows irregular distribution along the depths of penetration and its magnitude was estimated as 19.1kN/m. According to the accelerations obtained from accelerometer, it was seen that steel sheet pile behaviored nearly as a rigid body. Efficiency factor of an isolated sheet pile was 0.42 and that of the connected sheet pile was 0.71. Shapes of dynamic load transfer curves obtained from analysis of measuring devices was similar to those suggested by Dierssen.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2A
• /
• pp.371-382
• /
• 2006

A buffeting analysis is utilized for the estimation of aerodynamic vulnerability of a cable-stayed bridge due to upcoming wind turbulences. The buffeting analysis requires several input parameters such as structural parameters, aerodynamic parameters, and aero-elastic parameters. This study is motivated to estimate the sensitivity of these parameters on buffeting responses. The Seohae bridge is selected as an example bridge. The investigated parameters consist of the inclination of lift and drag coefficient of stiffening girder section, exponential decay factors of span-wise distributed wind turbulences, roughness length, spectra of wind velocity fluctuation, and structural damping. The buffeting response showed high dependency on the input parameters. As conclusions, the importance of parameter selection is emphasized. A further study is also proposed for more general conclusions.