• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.623-628
• /
• 2007

The accurate peak response estimation of a seismically excited structure with frictional damping system(FDS) is very difficult since the structure with FDS shows nonlinear behavior dependent on the structural period, loading characteristics, and relative magnitude between the frictional force and the excitation load. Previous studies have estimated that by replacing a nonlinear system with an equivalent linear one or by employing the response spectrum obtained based on nonlinear time history and statistical analysis. In the case that an earthquake load is defined with probabilistic characteristics, the corresponding response of the structure with FDS has probabilistic distribution. In this study, nonlinear time history analyses were performed for the structure with FDS subjected to artificial earthquake loads generated using Kanai-Tajimi filter. An equation for the probability density function (PDF) of the displacement response is proposed by adapting the PDF of the normal distribution. Finally, coefficients of the proposed PDF are obtained by regression analysis of the statistical distribution of the time history responses. Finally the correlation between PDFs and statistical response distribution is presented.

• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.615-627
• /
• 2021

The Baekildo fault, a dextral strike-slip fault developed in Baekil Island, Goheung-gun, controls the distribution of tuffaceous sandstone and lapilli tuff and shows a complex fracture system around it. In this study, we examined the spatial variation in the geometry and connectivity of the fracture system by using circular sampling and topological analysis based on a detailed fracture trace map. As a result, both intensity and connectivity of the fracture system are higher in tuffaceous sandstone than in lapilli tuff. Furthermore, the degree of the orientation dispersion, intensity, and average length of fracture sets vary depending on the along-strike variation in structural position in the tuffaceous sandstone. Notably, curved fractures abutting the fault at a high angle occur at a fault bend. Based on the detailed observation and analyses of the fracture system, we conclude as follows: (1) the high intensity of the fracture system in the tuffaceous sandstone is caused by the higher content of brittle minerals such as quartz and feldspar. (2) the connectivity of the fracture system gets higher with the increase in the diversity and average length of the fracture sets. Finally, (3) the fault bend with geometric irregularity is interpreted to concentrate and disturb the local stress leading to the curved fractures abutting the fault at a high angle. This contribution will provide important insight into various geologic and structural factors that control the development of fracture systems around faults.

• Journal of Oral Medicine and Pain
• /
• v.30 no.1
• /
• pp.45-55
• /
• 2005

As people prefer to use right or left hand, some have preferred chewing side while others do not. Totally, 82 volunteers composed of students and staffs from Dental Hospital College of Dentistry Yonsei University participated in this study for the investigation of influence of preferred chewing habit, that has lasted for more than a year, on electromyographic(EMG) activity of masticatory muscles and bite force. Among the 82 volunteers, 46 had preferred chewing habit while the other 36 did not. Prior to the investigation, those with factors that could affect the study, such as, general disease, irregular dentition and malocclusion, were screened and excluded by questionnaire and clinical examination. The results were as follows: 1. There was no significant difference in EMG activities between chewing side and non-chewing side of preferred chewing subjects at rest as well as maximal voluntary contraction(MCV)(p>0.05). 2. Asymmetrical coefficient of temporal and masseter muscle EMG activities between preferred chewing subjects and non-preferred chewing subjects at rest was not significantly different(p>0.05). 3. Asymmetrical coefficient of masseter EMG activity was significantly higher(p<0.05) than that of non-preferred chewing subjects at MCV, whereas that of anterior temporal muscle showed no difference(p<0.05). 4. In preferred chewing subjects, there was no significant difference in average bite force and occlusal contact area between chewing side and non-chewing side(p>0.05). 5. There was no significant difference in Asymmetrical coefficients of average bite force and occlusal contact area between preferred chewing subjects and non-preferred chewing subjects (p>0.05). Consequently, preferred chewing habit can be considered as physiological asymmetry with normal function rather than to have influence on EMG muscle activity of masticatory muscles, average bite force and occlusal contact area. Objective standardization to differentiate preferred chewing subjects and non-preferred chewing subjects should be established in the further study.

• Geotechnical Engineering
• /
• v.10 no.2
• /
• pp.121-140
• /
• 1994

This paper presents the probabilistic model to evaluate the three-dimensional stability of layered deposits and c-0 soil slopes. Rotational slides are assumed with a cylindroid control part terminated with plane ends. And the potential failure surfaces in this study are assumed with the logarithmic spiral curve refracted at boundary of layers. This model takes into consideration the spatial variabilities of soil properties and the uncertainties stemming from insufficient number of samples and the discrepancies between laboratory measured and in -situ values of shear strength parameters. From the probabilistic approxi mate method (FOSM and SOSM method), the mean and variance of safety factor are calculated, respectively. And the programs based on above models is developed and a case study is analysed in detail to study the sensitivity of results to variations in different parameters by using the programs developed in this study. On the basis of thin study the following conclusions could be stated : (1) The sensitivity analysis shown that the probability of failure is more sensitive to the uncertainty of the angle of internal friction than that of the cohesion, (2) The total 3-D proability of failure and the critical width of failure are significantly affected by total width of slope. It is found that the total 3-D probability of failure and the critical width of failure increase with increasing the slope width when seismic forces do not exist and the total 3-D probability of failure increases with increasing the slope width and the critical width of failure decreases when seismic intensity is relatively large, (3) A decrease in the safety factor (due to effect such as a rise in the mean ground water level, lower shear strength parameters, lower values for the correction factors, etc.) would result in reduction in the critical width of failure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.460-468
• /
• 2021

This study investigated the enhanced combustion efficiency of an "air-cooled combustion system" with single F.D. fan, and performed a numerical analysis for the operation and design conditions to increase the combustion efficiency. The combustion efficiency in an actual combustor was compared before and after the structure modification. Numerical analysis for application of a single fan revealed the difficulty of forming a turbulence for circular combustion conditions. This is because the supply ratio of combustion air supplied into 2 flow paths becomes irregular in the combustion furnace due to a change in friction force and pressure in each flow path. Subsequently, two methods of supplying air into the combustion furnace were analyzed numerically to obtain the optimal combustion conditions of an air-cooled combustion system. The first method involved injecting the preheated combustion air after a 180~360 degree rotation from the outer wall, whereas in the second method, the combustion air was injected into the combustion furnace in a tangential direction after primary heat exchange outside the combustion furnace, by applying a rotatable vane structure in the combustion furnace. Results reveal that application of a single F.D. fan to the air injection into a rotatable combustion furnace is desirable for optimization of the combustion conditions for applying a duct structure having a dual cooling wall for the cooling of the outer wall of the combustion furnace, and for maintaining perfect mixing in the combustion furnace. We therefore confirmed enhanced combustion efficiency by comparing the actual combustion efficiency before and after structure modification.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.100-117
• /
• 2020

National Treasure no. 101, the stupa of State Preceptor Jigwang from the Beopcheonsa Temple Site in Wonju has been transferred from place to place and reassembled several times since it was built. In particular, overall dismantling and repair was carried out in 1957 to restore parts damaged by bombing during the Korean War. Documented information on the repair process and materials used at that time does not exist. However, various types of metal materials used for this stupa have been identified during conservation work. Besides clamps anchor bolts, 9mm-thick circular rebars were mainly used for joining the parts of this stupa, while circular rebars and wires of various thicknesses were used for joining the parts with mortar restoration materials. Although deformed bars are typically used for stone pagodas classified as architectural structures, smooth circular rebars were used in this case. In terms of restoration using mortar, material shapes were transformed, bound alternately, and twisted irregularly to improve bonding strength and coherence in order to insert restoration materials and to bolster structural weaknesses. In addition, metallographic analysis showed the material to be hypo-eutectoid steel with low carbon content. Many non-metallic inclusions in the shape of drops of different sizes were included, which do not affect the whole elemental composition due to the very small quantities involved. Qualitative and EPMA analysis of Mn and S, which were not identified by SEM-EDS area analysis, established an even distribution of MnS in crystal grains of the microstructure, regardless of the shape of the samples. It is presumed that secondary homogenization and softening might have been conducted after manufacturing to facilitate the working process. Furthermore, in consideration of properties indicating that the thinner the steel is, the less carbon content contained and the greater the elasticity and elongation, it is judged that restoration work was ordered.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.5
• /
• pp.618-627
• /
• 1999

Background : Rifampicin (RFP) is a key component of the antituberculous short-course chemotherapy. Usually the RFP resistant M.tuberculosis is also resistant to isoniazid (INH), so the RFP resistance is the marker of multi-drug resistant (MDR) tuberculosis. But unusual cases of mono-RFP-resistant tuberculosis have been recently reported with increasing frequency, especially associated with HIV infection in western countries. Therefore, we conducted a retrospective study to investigate the frequency, causes, and the clinical characteristics of mono-RFP-resistant tuberculosis in Korea. Methods : Of the bacteriologically confirmed and susceptibility-proven 699 pulmonary tuberculosis patients (921 isolates) who visited Asan Medical Center from January 1990 to August 1997, eighteen patients with INH-susceptible and RFP-resistant tuberculosis were evaluated. Previous history of tuberculosis, antituberculous drug compliances, associated systemic illness, drug susceptibility patterns, and clinical outcomes were analysed. And rpoB gene sequencing was done in 6 clinical isolates of M. tuberculosis. Results : The mean age of 18 patients was $43{\pm}14$ years, and the sex ratio is 12:6 (M : F). Sixteen (89%) patients had previous history of tuberculosis. None had diagnosed gastrointestinal disorders, and 2 HIV tests that were performed came out negative. Susceptibility tests were done repeatedly in eleven patients, and six (55%) were mono-RFP resistant repeatedly while five (45%) evolved to MDR tuberculosis. Eight (44%) patients were cured, six (33%) failed, three (17%) were lost to follow-up, and the other one is now on treatment. rpoB gene sequencing showed 5 mutations, codon 531 TCG to TIG mutation in 4 isolates and 526 CAC to TAC in 1 isolate. Conclusion : The clinical characteristics of mono-RFP resistant tuberculosis were similar to that of MDR tuberculosis in Korea where the HIV infection rate is lower than western countries. But some patients with mono-RFP-resistant tuberculous could be cured by primary drug regimens including RFP, suggesting that mono-RFP-resistant tuberculous is a different entity from MDR tuberculosis.

• Clinical and Experimental Pediatrics
• /
• v.51 no.6
• /
• pp.576-583
• /
• 2008

Purpose : The identification of specific behaviors conducive to overeating or inactivity is the cornerstone of obesity management. The Committee on Nutrition of the Korean Pediatric Society developed parent and self-reporting questionnaires about eating behavior and physical activity in 2006. The aim of this study was to evaluate the usefulness of the questionnaires in assessing modifiable lifestyle factors related to obesity. Methods : A retrospective chart review was performed for 177 children (6-11 years old) and 134 adolescents (12-16 years old) from 10 hospitals between May 2006 and January 2007 who had completed parent or self-reporting questionnaires. Cases were divided into normal and overweight groups at or above the age-gender-specific 85th percentile based on 2007 Korean national growth charts. Results : Compared to children, the adolescents tended to have a significantly more sedentary lifestvle and inappropriate dietary behaviors significantly (P<.05). Overweight mothers were significantly associated with overweight children and adolescents (P<.05). Being overweight was significantly associated with a family history of adult diseases for children and adolescents (P<.05). Inappropriate eating behaviors (strong appetite, eating fast, eating until they were full, binge eating, favoring greasy foods) were associated with being overweight in children and adolescents. Sedentary activity such as TV viewing and using a computer were significantly associated with overweight in children and adolescents (P<.05). Conclusion : Intervention to modify obesity-related lifestyle factors is needed before adolescence. These questionnaires are useful in identifying modifiable lifestyle factors and in individual counseling for overweight children and adolescents in pediatric clinics.