• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.868-874
• /
• 2011

In this paper, a new structure to improve the resolution of an inductive torque sensor is proposed. The new coupling structure and the change of number of turns for the receiving coil increase the resolution of the torque sensor. Because this torque sensor has non-contact points, it has no abrasion at the contact point, and is very durable. Also, the torque sensor has less variation due to vibration or strain, and it has a good EMC(Electromagnetic Compatibility) and thermal characteristics.

• Journal of the Korean Geophysical Society
• /
• v.8 no.2
• /
• pp.53-61
• /
• 2005

2-D and 3-D resistivity surveys were carried out at the Deok-In2 levee during the period of arid and rainy seasons to assess the waterproof effectiveness of sheet pile and routing sections and detect the location of pipings. Inverted resistivity sections clearly indicated the boundaries of sheet pile and grouting sections and the locations of pipings observed at the ground surface. It is necessary that proper survey parameters are determined considering inverted depth and resolution and contacting resistance is decreased to obtain favorable result.

• Geophysics and Geophysical Exploration
• /
• v.5 no.2
• /
• pp.78-83
• /
• 2002

The finite element method combined with the sensitivity method is adopted for 2-dimensionl Fourier transform inversion. To improve the efficiency of inversion calculation, multi-resolution wavelet method is proposed., Theoretical data which is obtained from above method is shown to examine the proposed method. Theoretical model assumes that underground cavity is located in limestone area. In theoretical model, 16 current and potential electrodes are located to get theoretical data. It is shown that the about inversion method is very exact and useful calculation method, in case the larger model is very small such as under ground cavity.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.293-304
• /
• 2002

This paper describes the re-design and the calibration results of the MAG digital circuit onboard the KSR-3. We enhanced the sampling rate of magnetometer data. Also, we reduced noise and increased authoritativeness of data. We could confirm that AIM resolution was decreased less than InT of analog calibration by a digital calibration of magnetometer. Therefore, we used numerical-program to correct this problem. As a result, we could calculate correction and error of data. These corrections will be applied to magnetometer data after the launch of KSR-3.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.269-272
• /
• 1999

물체내부의 단층구조를 나타내는 B-모드 영상은, 물체의 내부 경계로부터의 반사신호를 직접 비디오 신호로 변환하여 그 진폭에 비례하는 휘도 또는 색상으로 나타내고 있다. 그러한 시간영역 파형에 의한 처리에 있어서는 각 신호가 시간적으로 근접해 있을 경우 영상화가 곤란하다. 본 연구에서는 B-모드 영상에 있어서 거리분해능을 향상시키기 위한 방법으로 캡스트럼법을 이용하는 것을 제안하고, 그 방법에 의해 음속이 알려진 얇은 물체의 두께를 보다 정확하게 측정, 표시함으로써 B-모드 영상화에 있어서의 분해능 향상 가능성을 보였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.222-225
• /
• 2002

The watermarking on medical images with wavelet packet is presented. The wavelet packet produces the enhancing the resolution from low to high band that minimize the loss on the band. The result on experiment is that PSNR is 0.1dB on image quality and PSNR is 28dB on the durability in compressed ratio 60% over. This proposal allows an enhancing and robust image to stand and oppose the distortion and modification by intention.

• Proceedings of the KIPE Conference
• /
• 2010.11a
• /
• pp.327-328
• /
• 2010

1980년초 미국 실리콘 밸리 소재 시게이트사에 의해 5메가 바이트 용량의 개인 컴퓨터용 하드 디스크 드라이브(HDD)가 처음 소개된 이후, HDD 개발 기술은 꾸준한 성장을 거듭하였다. 최근 인터넷의 보급으로 엄청나게 많은 정보저장용량을 요구하게 되었으며, 정보저장기기에 대한 폭발적인 수요에 부합하고 있는 기기중의 하나가 HDD이다. 드라이브에서 스핀들 모터의 제어는 주된 읽기 쓰기 동작을 위한 가장 기본적인 제반 여건이며, 단위 면적당 데이터(BPI)가 증가함에 따라서 스핀들 모터의 제어 성능은 드라이브 성능과 직결되는 더욱 중요한 인자중의 하나가 되었다. 본 논문에서는 스핀들 모터의 제어 성능 향상을 위해 스핀들 모터의 출력 이득을 조정하여 제어 분해능을 향상시키는 방법을 제시하고 있다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.85.1-85.1
• /
• 2016

현대 과학기술에는 표면/계면 및 나노물질의 구조와 물성을 분석하는 다양한 방법들이 존재한다. 이들 분석장비들의 분해능과 감도의 향상으로 이전에는 보지 못한 물성들이 속속 발견되고 있다. 이러한 흐름 속에서 분석장비들의 다기능 시대가 열리고 있다. 예전에는 성분, 형태, 구조, 전자구조 등을 분석하기 위해 각각에 해당하는 분석장비들이 동원되었다. 하지만 21세기에 접어들어 분석장비들이 두 종류 이상의 분석이 가능하도록 개발되었다. 예를 들면, TEM으로 형태를 보는 것 외에도 TED와 EELS로 구조와 성분을 동시에 확인할 수 있게 되었다. 전통적인 성분 및 전자구조 분석법의 하나인 광전자분광법도 microscopy 기능을 탑재하는 변신이 있었다. 본 발표에서는 빛과 전자를 시료에 조사하여 물질의 성분, 형태, 구조, 전자구조 등을 동시에 분석이 가능한 분석법들에 대해 소개하고자 한다. 그 중, SPEM(Scanning Photoelectron Emission Microscopy)은 포항가속기연구소에 설치되어 있으며, PEEM(Photoelectron Microscopy)과 LEEM(Low Energy Electron Microscopy)은 수차보정장치를 갖춘 사양으로 최근 한국기초과학지원연구원에 설치되었다. 위에 언급한 장비를 활용하여 얻은 데이터를 바탕으로 나노물질의 표면 및 계면의 특성을 분석하는 방법 및 최근 연구 결과를 소개하고자 한다.

• Journal of Radiation Protection and Research
• /
• v.37 no.1
• /
• pp.16-24
• /
• 2012

In the present study, a gamma-ray detector and associated signal processing circuit was developed for a side-absorber of a dual-mode Compton camera. The gamma-ray detector was made by optically coupling a CsI(Tl) scintillation crystal to a silicon photodiode. The developed signal processing circuit consists of two parts, i.e., the slow part for energy measurement and the fast part for timing measurement. In the fast part, there are three components: (1) fast shaper, (2) leading-edge discriminator, and (3) TTL-to-NIM logic converter. AC coupling configuration between the detector and front-end electronics (FEE) was used. Because the noise properties of FEE can significantly affect the overall performance of the detection system, some design criteria were presented. The performance of the developed system was evaluated in terms of energy and timing resolutions. The evaluated energy resolution was 12.0% and 15.6% FWHM for 662 and 511 keV peaks, respectively. The evaluated timing resolution was 59.0 ns. In the conclusion, the methods to improve the performance were discussed because the developed gamma-ray detection system showed the performance that could be applicable but not satisfactory in Compton camera application.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.816-821
• /
• 2019

A counter-type time-to-digital converter was designed using a dual edge T flip-flop. The time-to-digital converter was designed with a $0.18{\mu}m$ CMOS process at a supply voltage of 1.5 volts. In a typical time-to-digital converter, when the period of the clock is T, a conversion error corresponding to the period of the clock occurs due to the asynchronism between the input signal and the clock. However, the clock of the time-to-digital converter proposed in this paper is generated in synchronization with the start signal which is the input signal. As a result, conversion errors that may occur due to asynchronization of the start signal and the clock do not occur. The flip-flops constituting the counters are composed of dual-edge flip-flops operating at the positive and negative edges of the clock to improve the resolution.