• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.1
• /
• pp.55-59
• /
• 1999

The Rapid Expansion of Supercritical fluid Solutions (RESS) process was applied to particles coating. Microcapsules prepared by spray drying were used as the core particles, and two kinds of paraffin were used as the coating materials. Supercritical $CO_{2}$ solutions of paraffin were expanded through the short nozzle into the bed that was fluidized by air. Extraction temperature and pressure were varied at $50~120^{\circ}C$, $150~200\;kg/\textrm{cm}^2$, respectively. The thickness of theoritical coating layer ws measured, and precipitate coating layer on surface was analyzed by using SEM, FT-IR. The release behaviors of $Mg^{2+}$ ions were inspected by atomic absorbance spectrophtometer.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.1
• /
• pp.61-67
• /
• 2011

Influence of hexamethyldisilazane(HMDS) in post processing technique by using n-butanol azeotropic distillation on the luminescence properties of YAG:Ce nanophosphor were studied. The organic solvent(n-butanol) azeotropic distillation which prevent powders from conglobation since lager molecules decrease the surface tension and more complete replace the residual water in the precipitate. HMDS that had larger molecules than that of n-butanol was added in azeotropic distillation. The phosphor synthesized from n-butanol azeotropic distillation exhibited lower agglomerate and better photoluminescence properties than that from HMDS added heterogeneous azeotropic distillation.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.548-553
• /
• 2011

The device for studying combustion characteristic of aluminum powder and water was developed. The device has ability to adjust temperature, pressure, and equivalent ratio to some specified value which effect on combustion characteristic of aluminum and water mixture. Methane combustor, water supply device, aluminum powder feeder, and linear combustor are assembled to aluminum combustion test device. Each device has the ability to supply matter to combustor on steady and quantitatively controlled manner and test sequence specified by user can be automatically controlled. The combustion of aluminum powder was observed when integrated device was operated normally.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.19 no.1
• /
• pp.85-107
• /
• 1993

The cosmetic fine powders were mixed with variation of mixing time(5) in the mixers (ribbon mixer, powder mixer, micropulverizer and fine impact mill). The powders were nixed with small amount of ferric oxide. as tracer. The mixed powders ere measured the particle size distribution, specific surface area and surface color with mixing time (s). The color variation, particle size distribution and specific surface area of the mixed powder exist a relationship with mining time(s) that can be expressed as mathematical equations to show the degree of the mixing of the powder mixture. The linear velocity of the impellar tip is the main factor contributing to he mixing efficiency of the mixers un this study. According to the linear velocity, he mixers used are devieded as convection mixing (ribbon mixer), sclera mixing powder mixer) and diffusion mixing (micropulverizer/fine impact mill).

• Korean Journal of Microbiology
• /
• v.42 no.2
• /
• pp.149-152
• /
• 2006

The sp%pl null mutant was constructed to study the function of fission yeast Schizosaccharomyces pombe spThp1, which is homologous to budding yeast Saccharomyces cerevisiae THP1. Tetrad analysis showed that the spThp1 is not essential for vegetative growth. The spThp1 null mutant also showed no massive poly(A)+ RNA export defect. However, spThp1 null is genetically associated with spMex67 null. These results suggest that spThp1 is involved in mRNA export out of the nucleus.

• Korean Journal of Microbiology
• /
• v.42 no.2
• /
• pp.153-155
• /
• 2006

We constructed the null mutants of fission yeast Schizosaccharomyces pombe spSac3 gene that is homologous to budding yeast Saccharomyces cerevisiae SAC3 involved in mRNA export out of nucleus. Tetrad analysis showed that the spSac3 is essential for vegetative growth. The spSac3 mutants harboring pREP81X-spSac3 plasmid showed poly(A)+ RNA export defect in the presence of thiamine. These results suggest that spSac3 is also involved in mRNA export from the nucleus.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.7
• /
• pp.25-31
• /
• 2010

In this study, it was intended to suggest new cooling method that enables to improve the applicability and added value higher than existing slag by applying new cooling method(powder cooling slag) at the time discharging slag, which is produced from the ash melting system that the plasma torch is used for the first time in Korea. It is suggested the applicative direction in the development of future recycling process by discovering its nature of material and applicative possibility as earthwork material. The ashes produced after the sewage sludge discharged from Y city was incinerated by the fluidized bed method and was used as test materials. As result of XRF(X-Ray Flourescence Spectrometry) analysis, main ingredient of sewage sludge ashes was $SiO_2$(32%) besides CaO, $Al_2O_3$, $Fe_2O_3$, and so on. In addition, as result of XRD analysis, traditional diffuse pattern of glass could be found from granulated air-cooled slags, while a minor crystal phase could be observed from powder cooling slag, because the powder on the surface exists in the state not melted. From EDX(Energy Dispersive X-ray Spectroscopy) analysis, it is deemed that powder ingredient has no change before and after it is used as cooling medium, and accordingly it is thought that the powder can be produced as the material where the function is added if used in different shape.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.6
• /
• pp.505-512
• /
• 2016

Even though high performance concrete was developed according to the trend of bigger and higher of reinforced concrete building, the rheological evaluations such as viscosity, yield stress are not enough to use as input data to accomplish the numerical analysis for the construction design. So there are many problems in the harden concrete such as poor compaction, rock pocket and crack, etc. in the field. In this study, consistency curves were measured by the viscometer as hydration reaction time passed. At the same time the slump flow test and Vicat setting test were carried out for comparing with the results of rheological properties. The fluidity of the W/B 30% decreased as the increase of replacement ratio of blast furnace slag. But in case of W/B 40%, the replacement ration did not significantly influenced to the slump flow value with the passage of hydration time. By the replacement of blast furnace slag to cement, initial setting was delayed and the time gap between initial and final setting became shorten. Through the regression analysis using Bingham model, there are a sudden changes of viscosity and yield stress around initial setting in case of low W/B 30%. The increase of workability by the change of free water in cement paste was offset by the coating effect of impermeable layer in case of W/B 40%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.500-507
• /
• 2008

By Using various grinding mill in powder cosmetics manufacturing process; screen milt and pin mill, jet mill, properties of the powder and grinding mills were studied; talc, mica, nylon powder, silica, titanium dioxide. Besides, the experiments fur evaluation of grinding were performed by using iron oxides those are tracers. In powders of plate shape, they were grinded more vertically than horizontally at the screen mill and pin mill, although were all grinded vertically and horizontally at the jet mill. The spheric powders became the primary particles or aggregation by electrostatic interaction at the screen mill and pin mill. But, at the jet mill, they resulted the agglomeration or transformation or damage up to 2bar. Titanium dioxides became the primary particles by all grinding mill. Pin mill has an excellent result in experiments which is a change of the tone of color by grinding. From these results, suggest that the jet mill is used to pre-treat of powders of plate shape in practical cosmetic manufacturing process, and the screen mill and pin mill are used to match the color of powder cosmetics. If industrial process condition is taken into consideration, suggest that 4times of grinding is excellent on grinding effect by the screen mill, and twice grinding by the pin mill and grind air pressure of 1bar by the jet mill.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.178-185
• /
• 1999

For the process control of silicon nitride gelcasting, the composition effect of acryamide system on the viscosity of slip and mechanical property of gelcast green body were investigated. The slip was prepared by ball milling of silicon nitride suspension prepared with acrylamide monomer and polyelectrolyte dispersant after premixing them by attritor. The slip mixed with initiator was vacuum deaired and cast into molds, and then polymerized. The consolidated green body was obtained by drying the gelated slip. The viscosity measument and the diametral compression test was done to evaluate the rheological behaviro of slip and mechanical property of gelcast body, respectively. Experimental results showed that the high solid loading of silicon nitride slip was obtained up to 46 vol% with a low viscosity. The mechanical property of gelcast body mainly increased with increasing the concentration of monomer. The gelcast body was machinable above the ∼3 MPa of tensile strength. The relative density of pressured-sintered body was 98.5% at 1760$^{\circ}C$, 3 h.