• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.299-306
• /
• 2016

In this study, new hydroxyapatite powder surface composites were investigated for protective effects against ultraviolet rays. Hydroxyapatite (HAp) is biocompatible and does not cause nebula phenomenon on skin. We investigated the surface modification of hydroxyapatite to improve UV block and skin usage. Dimethicone, lauroyl lysine, triethoxycaprylylsilane and silica were used as coating agents for the surface modification of HAp. To prepare the composite complex of the modified surface, the dimethicone, lauroyl lysine and triethoxycaprylylsilane were prepared by a dry process, and silica by a hydrothermal synthesis method. The HAp-silica was chosen as the best composite powder when measuring its sun protection levels. We investigated the characteristics of the surface of HAp-silica by SEM, particle size analyzer and energy dispersive spectrometry (EDS). Additionally, the stability in the formulation, UV block effect, and safety in BB creams were investigated. In conclusion, HAp-silica prepared by the modification of HAp complex surface improved the skin usage and UV block effect by enhancing the white cloudy phenomenon. These results indicate that HAp-silica may be used for UV block cosmetics.

• Journal of Adhesion and Interface
• /
• v.9 no.2
• /
• pp.32-37
• /
• 2008

A series of UV-curable powder coatings with different contents of photoinitiator (0.5 wt%, 1 wt%, 2 wt%) were formulated and measured gel content, tensile strength of cured film. Heat-sensitive substrates such as MDF, plywood and PVC were coated UV-curable powder and cured coatings were measured physical properties by pendulum hardness tester, glossmeter, pull-off adhesion tester. With increasing photoinitiator content, adhesion force between coating and substrate decreased because of crosslinking density increasing. The results of pendulum hardness was not significantly changed but gloss was changed according to different substrates. Adhesion of UV-curable coatings was enough to apply for heat-sensitive substrates. From these results, we concluded that contents of photoinitiator was a effective factor in UV-curable powder coatings. UV-curable coatings was a portential candidate for heat-sensitive substrates.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.58-65
• /
• 1998

Substituted dicyandiamide(Sub-DICY), Accelerated dicyandiamide(Acc-DICY), Trimellitic anhydride(TMA), Pyromellitic dianhydride(PMDA) and Phenolic curing agent(Ph.C.A.) are mainly used for epoxy powder coating curing agent. Various characteristics of epoxy films fully cured by optimum condition such as mechanical properties like $T_g$, tensile strength, elongation at break hardness, abrasion resistance and chemical properties like water absorption, acid resistance, alkali resistance and electrical properties, corrosion resistance are determined by various measuring devices and analyses devices. In conclusion, phenolic curing agent was shown excellent thoughness but severe color change as temperature increased. Acid anhydride has excellent insulation properties and color stability at elevated temperature but lower thoughness and adhesion to substrate. DICY curing agent was shown high water absorption and severe color chance as temperature increased.

• YAKHAK HOEJI
• /
• v.42 no.3
• /
• pp.284-289
• /
• 1998

The effect of reaction condition, solvent addition and thermal treatment on the bulk density, crystallinity and chemical properties of the freeze-dried cefazohn sodium was inves tigated to prepare the cefazolin sodium powder for injection with good flowability. Crystalline cefazolin sodium powder with high untapped-bulk density (about 45%) and low compressibility (about 40%) was obtained by solvent addition to the very highly concentrated cefazohn sodium solution followed by subsequent thermal treatment before freeze-drying. The desirable solvent was low substituted alcohol such as isopropyl alcohol and anhydrous ethanol with the final concentration of about 9%. The pH adjustment and nitrogen gas purging during the reaction did not give significant effect on the chemical properties such as content, color, transmittance and pH of the reconstituted cefazolin sodium aqueous solution.

• Journal of the Korean Ceramic Society
• /
• v.27 no.3
• /
• pp.361-368
• /
• 1990

The properties of the powder of ZrO2＋3m/o Y2O3 system prepared by co-precipitation method at the pH values of 7, 9, 10 and 11 were investigated. ZrOCl2.8H2O and YCl3.6H2O were used as starting materials and NH4OH as a precipitation agent. Zirconium hydroxide near by Zr(OH)4 structure showed more excellent crystallinity and lower formation temperature of tetragonal ZrO2. In the range of this study, cubic ZrO2 was not formed and stability of tetragonal ZrO2 prepared in the conditiion of pH 7 was most excellent. Average particle sizes and specific surface areas of tetragonal ZrO2 powders, prepared as calcining amorphous zirconium hydroxides at $600^{\circ}C$ for 1h, were 0.6-0.8${\mu}{\textrm}{m}$ and 45-70$m^2$/g, respectively.

• Journal of Korean Society for Atmospheric Environment
• /
• v.4 no.1
• /
• pp.71-75
• /
• 1988

대기오염이 인체에 미치는 영향을 연구하기 위하여 오염의 농도가 지극히 심할 것으로 예측되는 고속도로 서울톨게이트에 근무하는 근로자 37명과 사무직 15명을 대상으로 혈액 및 요중 납함량과 요중 코프로포르피린을 정량하고 임파구 중 자매염색분체 교환빈도를 계산하여 인적특성에 따라 비교 검토하였다. 한편 대기오염의 정도를 파악하고자 1986년 4월부터 약 3개월에 걸쳐 아황산가스, 이산화질소, 일산화탄소, 부유분진, 납, 벤조파이렌 등 인체에 유해한 오염물질들을 톨게이트 근무자가 근무하는 위치의 공기 중에서 정량하였다. 이들 성적을 비교 검토한 바 다음과 같은 결론을 얻었다. 1. 톨게이트 내의 공기 중 이산화질소, 일산화탄소, 부유분진, 벤조파이렌, 납량 등이 서울시내 일반 대기보다 월등히 높았다. 2. 톨게이트 근로자의 혈중 납량, 요중 납 및 포프로포르린량, 그리고 임파구 내의 자매염색분체 교환빈도의 평균치가 사무직근로자보다 유의하고 높았다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.329-330
• /
• 2009

Food waste contains almost no heavy metals and high fuel ratio 0.14-0.17 that makes it a good candidate for solid fuel. Thermogravimetric analysis showed that volatile matter volatilizes at $200-400^{\circ}C$, and ignition temperature is $460^{\circ}C$. Combustion efficiency measured from energy balance before and after combustion was over 99%. Pulverized fuel made from food waste is a new and renewable energy which contribute to low carbon green economic growth.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.96-97
• /
• 2020

In this study, the compressive strength and porosity characteristics of cement mortar mixed with liquid and powder composite water repellent were evaluated. When the liquid water repellent was mixed, the compressive strength at 28 days of age was 42% compared to OPC, and the compressive strength was greatly reduced. However, the 28-day compressive strength of the powder water repellent mixture and P5L1, P6L1 liquid and powder composite water repellent was about 97% compared to OPC, and there was little decrease in compressive strength.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.20.2-20.2
• /
• 2000

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.170.1-170
• /
• 2002