• Applied Biological Chemistry
• /
• v.37 no.2
• /
• pp.65-71
• /
• 1994

Chungkook-Jang was produced by fermenting Bacillus licheniformis CN-115. The changes of chemical composition, enzyme activity, and amino acids during the fermentation were investigated. The proximate composition was shown irregular fluctuation phenomenon during the fermentation, but only the moisture tended some reducing during the fermentation just after steaming. The content of amino nitrogen was increased radically after the 36 hours of fermentation and became the highest level at 18.072 mg/g at the 60 hours of it. In accordance with the fermentation of Chungkook-Jang, pH got to the 8.39 at 60 hours with increasing, protease activity was increased according to the fermentation and acid and neutral protease activity was reduced after being reached at the highest activity at 48 hours. The most suitable pH was 6.5 and temperature was $35^{\circ}C$ for dissolution-activated of protein in the process of fermentation of Chungkook-Jang. The content of water soluble protein and the content of salt soluble protein were increased at continuously according to the fermentation time of Chungkook-Jang the largest quantity. The molecular weight of water soluble protein of Chungkook-Jang fermented for 48 hours was about 19,000. The amino acids of water soluble protein just after steaming were totally 16 kinds and proline was amino acid and them was in series by glutamic acid and serine in that ordered. The amino acids salt soluble protein, just after steaming were totally 16 kinds and was the largest quantity phenylalanine, glutamic acid and aspartic acid and aspartic acid in that order.

• Korea journal of population studies
• /
• v.29 no.1
• /
• pp.185-207
• /
• 2006

Predominant explanations of the persistence of sex segregation ill occupations link job choices to profoundly gendered responses to childbearing and other family demands, arguing that women are more likely to seek jobs which are in some sense compatible with motherhood, either because they are family friendly (flexible, low intensity work) or because they are easy to exit and re-enter. In this paper, I examine the effect of occupational sex segregation on job exits into the labor market among women, with a special attention to the role of childbearing and child rearing. I use data from detailed employment histories gathered from the National Longitudinal Survey of Youth (NLSY) in continuous time event history models. My results indicate that women in female dominated jobs are less likely to exit their jobs than women in other types of occupations. Further this relationship is not shaped by motherhood. While mothers or pregnant women are more likely to leave work, mothers in female-dominated occupations are slightly less likely to leave employment than mothers in other occupations. These results are not consistent with the ideas that women's choice of female-dominated occupations expresses a gendered identity and women strategically seek jobs which accommodate maternal roles. Taken together, my findings do not provide support to the idea that women choose female-dominated occupations because they are easier to integrate with motherhood (except for the pregnancy period).

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.131-137
• /
• 2012

Polyaniline (PANI) and polypyrrole (Ppy) hollow sphere structures with controlled shell thicknesses can be easily synthesized than those of using a layer-by-layer method for cathode active material of lithium-ion batteries. Polystyrene (PS) core was synthesized by emulsion polymerization using an anion surfactant. The shell thicknesses of PANI and Ppy were controlled by amounts of aniline and pyrrole monomers. PS was removed by an organic solution. This structure increased in contact with an electrolyte and a specific capacity in lithium-ion batteries. But polymers have disadvantages such as the difficult control of molecular weights and low densities. These disadvantages were completed by controlled shell thicknesses. The amount of aniline monomer increased from 1.2, 2.4, 3.6, 4.8 to 6.0 mL, and the shell thicknesses were 30.2, 38.0, 42.2, 48.2, and 52.4 nm, respectively. And the amount of pyrrole monomer was 0.6, 1.2, 2.4 and 3.6 mL, the shell thicknesses were 16.0, 22.0, 27.0 and 34.0 nm, respectively. In the cathode materials with controlled shell thicknesses, shell thicknesses of the PANI hollow spheres were 30.2, 42.2, and 52.4 nm, and discharge specific capacities of after 10 cycle were ~18, ~29, and ~62 mAh/g, respectively. The shell thicknesses of the Ppy hollow spheres were 16.0, 22.0, 27.0 and 34.0 nm, and discharge specific capacities of after 15 cycle were ~15, ~36, ~56, and ~77 mAh/g, respectively. Thus, shell thicknesses of PANI and Ppy increased, the specific capacities increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.6
• /
• pp.840-846
• /
• 2015

We investigated blueberry wine made using traditional yeast (Saccharomyces cerevisiae M-5) and Saccharomyces cerevisiae Fermivin which is widely used in wine manufacturing, and measured its fermentative characteristics and antioxidant activity. S. cerevisiae M-5 is a traditional yeast isolated from domestically grown Black raspberry (Rubus occidentalis). Both S. cerevisiae M-5 and Fermivin were inoculated into blueberry juice (BBJ) up to $1{\times}10^9CFU/kg$, followed by incubation at $25^{\circ}C$ for 39 days. Final fermentation products of blueberry fermented with S. cerevisiae M-5 (BBM) presented 13.10% alcohol, $8.42^{\circ}Bx$ of sugar, and 1.183% acidity, and final fermentation products of blueberry fermented with Fermivin (BBF) presented 14.20% alcohol, $8.2^{\circ}Bx$ of sugar, and 1.153% acidity. The contents of total polyphenol and flavonoid compounds of BBM were higher than those of BBF and BBJ. DPPH and ABTS radical scavenging activities and reducing power of BBM were higher than those of BBF. The sensory evaluation revealed that BBM showed excellent flavor, taste, and overall acceptability compared with BBF. Based on these results, the possibility of industrial utilization of S. cerevisiae M-5 as traditional yeast was confirmed by sensory evaluation and antioxidant activity. Fermentation rate of S. cerevisiae M-5 was similar to Fermivin, which is used in the food industry.

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.147-155
• /
• 2016

This study presented a measure for turning by-products, released from land farming sites, into resources. The measure involved adding food by-products such as rice bran and nonfat soybean to the sludge, released from the eel farming sites, inoculating the lactic acid bacteria, Aspergillus oryzae, and Bacillus subtilis by step, fermenting them, and measuring the changed ingredients of the fermented fodder. The water content of the fermented fodder by the step of preparation was the first-step fermented product (14.6%) using the lactic acid bacteria, and the second and third-stage fermented product (33.0% and 34.0% respectively) using Aspergillus oryzae and Bacillus subtilis. The pH level was found to be 5.38 in the first-step fermented product due to the secretion of lactic acid caused by the lactic acid bacteria, and the pH level of the second and third-stage fermented products was 5.66 and 7.26, respectively, showing that the pH level increased. The phytic acid content was 0.126g/100g in the first-step fermented product, 0.004g/100g in the second-stage fermented product, and 0.093g/100g in the third-stage fermented product. The measurement of nitrogen content revealed that the amino nitrogen content was high with 1226.37mg% in the second-stage fermented product, and a little lower with 710.18mg% in the third-stage fermented product. The ammonium nitrogen content increased from 0.988mg/kg in the first-stage fermented product to 1.502mg/kg in the third-stage fermented product. Total nitrogen content increased to 2.78% in the first-stage fermented product, 4.08% in the second-stage fermented product, and 4.85% in the third-stage fermented product. As fermentation continued with the three microbes, the phytic acid decreased, and the protein decomposition rate increased. Also, due to the 3 step fermentation, the low-molecule nitrogen ingredient content increased, suggesting that the fodder was developed to offer high digestion and absorption.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.147-157
• /
• 2023

Centella asiatica extract is widely used as a raw material for cosmetics due to its various effects, but it is difficult to expect penetration into the skin due to its high molecular weight and low solubility. In order to solve these problems, lipid-based liposomes of various types were developed to increase skin absorption. Therefore, in this study, we tried to increase the skin absorption rate by preparing transfersomes using surfactants as edge activators in existing liposomes. Liposome and transfersomes containing Span 80 and Tween 20, 60, 80, and 85, respectively, were prepared using a high-pressure homogenizer, and we evaluated the particle size, polydispersity index, zeta potential, and skin absorption rate. As a result, there was almost no change in the physical properties of particle size, polydispersity index and zeta potential from 25 ℃ to 60 d, and the particle size of transfersomes containing Tween 20, 60, and 80 increased after 60 d at 45 ℃. Madecassoside, main substances of the Centella asiatica extract was used as an standard and madecassoside was measured and calculated when measuring the skin absorption rate using Franz diffusion cells. As a result, formulations containing Tween 20 were the most, whereas formulations containing Span 80 were the least. According to the skin absorption coefficient (Kp) value, all formulations showed 'very fast', and the absorption rate was similar or greater than that of liposomes, except for formulations containing Span 80. Through this, it was confirmed that the larger the HLB value of the nonionic surfactant, the smaller the particle size of the transfersome, and the increased skin absorption rate due to the increased flexibility of the vesicle membrane. Through this study, transfersome using surfactant as an edge activator can be expected to solve local skin problems not only as a cosmetic raw material or product, but also by increasing skin absorption.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.1
• /
• pp.96-101
• /
• 2003

This study was done to analyze the contents of minerals, to compare the measured values of calcium and the labeled values in food labeling and to analyze the ratio of calcium to other minerals in 43 calcium-fortified Food products sold in markets in Seoul, Korea. Content of minerals such as Ca, P, Mg, Na, K, Fe, Cu, Zn was measured by atomic absorption or colorimetric method after dry-ashing or wet-ashing. The measured values of calcium were ranged 65.5~343.9% of the labeled values in 43 calcium-fortified products. In 21 calcium-fortified food products, the measured calcium values were ranged 120～160% of the labeled values, and in three drinks those were less than 80% of the labeled, which is not acceptable to the food regulation. The ratios of Ca:P were 2.63$\pm$1.99 (mean$\pm$SD) in grain Products, 1.79$\pm$0.39 in Ramyuns, 2.80$\pm$0.53 in retort pouch food products and 8.35$\pm$12.87 in drinks. The Ca:Fe ratios were 126.33$\pm$44.36 in grain products, 130.65$\pm$34.67 in Ramyuns, 120.31$\pm$71.15 in retort pouch food products and 700.25$\pm$553.70 in drinks. The ratios of Ca:Mg were 11.86$\pm$5.40 in grain products, 9.29$\pm$1.34 in Ramyuns, 9.09$\pm$2.09 in retort pouch food products and 32.50$\pm$41.35 in drinks. The P:Mg ratios were 4.11$\pm$1.54 in grain products, 4.17$\pm$0.67 in Ramyuns, 2.58$\pm$0.45 in retort pouch food Products and 2.59$\pm$2.50 in drinks. These results suggest calcium contents and the ratio of calcium contents to other minerals in calcium-fortified food products should be strictly controlled.

• Journal of Preventive Medicine and Public Health
• /
• v.15 no.1
• /
• pp.187-196
• /
• 1982

The followings are the results of the study on industrial accidents occurred at 12 factories manufacturing metal products during the period of 2 years from January 1980 to December 1981 in the area of Yong-Dung-Po in Seoul. The results of the study are as follows: 1. The incidence rate of industrial injuries was 45.7 per 1,000 workers of the sample group and the rate of male (54.0) was three times higher than that of female (17.5). 2. In age groups, the highest rate was observed in the group of under 19 years old with 83.5, while the lowest in the group of 40s. 3. It was found that those who had short term of work experience produced a higher rate of injuries, particularly, the group of workers with less than 1 year of experience showed the highest rate of it as 48.1%. 4. In working time, the highest incidence rate occurred 3 and 7 hours after the beginning of their working showing the rate of 6.0 and 6.1 per 1,000 workers, respectively. 5. The highest incidence rate was observed on Monday as 8.4 per 1,000 workers, and it was 18.3% in aspect of the days of a week. 6. In aspect of the months of a year, the highest incidence was observed on July 1,000 workers and the next was on March as 4.8. These figures account for 11.8% of total occurrence in respective month. as 5. 4 per and 10.5% 7. In causes of injuries, the accident caused by power driven machinery showed the highest rate with 37.5%, the second was due to handling without machinery with 17.2%, and the third was due to falling objects with 14.2%, and striking against objects with 10.2%, and so on. 8. By parts of the body affected, the most injuries 84.3% of them occurred on both upper and lower extremities with the rate of 58.8% for the former and 25.5% for the latter. Fingers were most frequently injured with a rate of 40.3%. Comparing the sites of extremities affected, rate of injuries on the right side was 55.0% and 45.0% on the left side. 9. In the nature of injury, laceration and open wound were the highest with 34. 0%, the next was fracture and dislocation with 31. 9%, and sprain was the third with 8.1%. 10. On the duration of treatment, it lasted less than one month in 68.9% of the injured cases, of which 14.5% of the cases were recovered within 2 weeks, and 54.4% of them were treated more than 2 weeks. And the duration of the treatment tended to be prolonged in larger industries. 11. The ratio of insured accidents to uninsured accidents was 1 to 4.7.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.409-419
• /
• 2015

This study was conducted to establish an efficient screening method for watermelon plants resistant to Fusarium wilt (FW), which is caused by Fusarium oxysporum f. sp. niveum (Fon). An HA isolate was prepared from a wilted watermelon plant in Haman-gun and identified as F. oxysporum f. sp. niveum based on morphological characteristics, molecular analyses of ITS (internal transcribed spacer) and TEF (translation elongation factor $1{\alpha}$) sequences, and host specificity on cucurbits including watermelon, melon, oriental melon, and cucumber. The assay for disease response of watermelon differentials indicated that the HA isolate was race 0. Among seven liquid media tested, the highest amount of Fon spores was produced from V8-juice broth, which was selected as a medium for mass production of Fon. The disease assay for 21 watermelon and 11 watermelon-rootstock cultivars demonstrated that 20 watermelon cultivars except for 'Soknoranggul' were susceptible; 'Soknoranggul' was moderately resistant. All the tested rootstock cultivars were highly resistant to the HA isolate. The evaluation of disease development depending on various conditions suggested that an efficient screening method for FW resistance in watermelon plants is to dip the roots of 10-day-old seedlings in spore suspension of $1.0{\times}10^5-1.0{\times}10^6conidia{\cdot}mL^{-1}$ for 30 min., to transplant the seedlings to plastic pots with a fertilized soil, and then to cultivate the plants at $25^{\circ}C$ for 3 weeks.

• Food Science and Preservation
• /
• v.20 no.6
• /
• pp.877-885
• /
• 2013

Wine extracts of four different berry fruits, such as mulberry, blueberry, strawberry, and raspberry, were investigated for antioxidant, anti-tyrosinase, and ${\alpha}$-glucosidase activities by using in vitro assays. Additionally, quantitative changes of ${\alpha}$-glucosidase inhibitor in mulberry wine were determined by HPLC according to mulberry cultivars and fermentation process. Among four berry wines examined, mulberry wine showed the most potent ${\alpha}$-glucosidase inhibitory activity with 69.37% at 0.23 mg/mL, while blueberry and strawberry wines exhibited the strongest inhibition against DPPH radical and tyrosinase activity, respectively. Four compounds were isolated and purified from mulberry wine by a series of isolation procedures, such as solvent fractionation, and Diaion HP-20, ODS-A, and Sephadex LH-20 column chromatographies. Among them, Comp. 4 exerted the strongest ${\alpha}$-glucosidase inhibitory activity ($I_C_{50}=31.57{\mu}M$), and its chemical structure was identified as quercetin by UV and NMR spectral analysis. Finally, the "Daeseongppong" (16.83 ppm) muberry wine had larger amount of quercetin than the "Iksuppong" (14.85 ppm) and "Cheongilppong" (8.92 ppm) mulberry wines, but their contents of three mulberry wines decreased considerably with aging process. These results suggest that mulberry wine containing quercetin acted as ${\alpha}$-glucosidase inhibitor may be useful as a potential functional wine for improving diabetic disorder.