• Journal of ILASS-Korea
• /
• v.7 no.4
• /
• pp.32-41
• /
• 2002

The breakup characteristics of liquid sheets formed by like-doublet injector were investigated in the cold-flow and atmospheric ambient pressure condition. The sheet breakup wavelength, which induces the sheet to be broken into ligaments, as well as the sheet breakup length, which is important for the flame location, was measured using a stroboscopic light. The liquid ligaments are formed intermittently after the breakup of sheet, and the wavelength of ligaments has been believed to have a relation to the combustion instability of liquid rocket engine. Therefore, the wavelength of ligaments and the breakup length of ligaments into fine drops were also measured. Since these spray characteristics are affected by the flow characteristics of two liquid jets before they impinge on each other, we focused on the effects of orifice internal flow such as the cavitation phenomenon that occurs inside the sharp-edged orifice. From the experimental results, we found that the liquid jet turbulence delays the sheet breakup and makes shorter wavelengths for both sheets and ligaments. Since the turbulent strength of sharp-edged orifice is stronger than that of round-edged orifice, the shape of orifice entrance results in large differences in the spray characteristics. Using these results, we proposed empirical models on the spray characteristics of the like-doublet injector, and these models are believed to provide some useful and actual data for designing liquid rocket combustors.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.5
• /
• pp.9-17
• /
• 2008

Pseudo-3D spatial distribution of spray droplets is investigated by using Dual-mode Phase Doppler Anemometry (DPDA) in order to examine the disintegration and spreading behavior of spray exiting from liquid-propellant thruster injector. Spray injected from nozzle orifice with length-to-diameter ratio ($L/d_o$) of 1.67 and under the injection pressure of 27.6 bar is aligned to the vertical. Vertical and horizontal mean velocities of droplets, Sauter Mean Diameter (SMD), and volumetric flux decrease as droplets travel from center/upstream toward outer region/downstream of spray. Although the distribution of spray characteristic parameters is symmetric against the geometric axis of nozzle orifice, their absolute values are asymmetric.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.6
• /
• pp.104-109
• /
• 2004

On this paper study is concentrated on the breakup and atomization characteristics of spray formed by impinging jet injectors(like-doublet) used in liquid rocket engine(LRE). On the process of breakup and atomization, injection velocity and ambient gas pressure are the main parameters, so that these are used as variables that specify the experimental condition. Injection velocity varied from 3m/s to 30m/s and ambient gas pressure changed from 0.1MPa to 4.0MPa with nitrogen gas. As results, measured physical quantities decreased with increasing injection velocity and ambient gas pressure. But the decreasing ratios are different from those of the theory.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.186-190
• /
• 2006

This study was performed to investigate the characteristics of a co-axial swirl injector. Especially to predict the initial liquid sheet thickness and spray cone angle of an outer orifice a concept of effective area was introduced from hydraulic analysis. In addition, the parameters determining the characteristics of a co-axial swirl injector were re-defined around outer orifice. The calculated results-SMD, spray cone angle, and spray thickness agreed well with the test results qualitatively.

• Korean Journal of Microbiology
• /
• v.42 no.2
• /
• pp.149-152
• /
• 2006

The sp%pl null mutant was constructed to study the function of fission yeast Schizosaccharomyces pombe spThp1, which is homologous to budding yeast Saccharomyces cerevisiae THP1. Tetrad analysis showed that the spThp1 is not essential for vegetative growth. The spThp1 null mutant also showed no massive poly(A)+ RNA export defect. However, spThp1 null is genetically associated with spMex67 null. These results suggest that spThp1 is involved in mRNA export out of the nucleus.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.16 no.2
• /
• pp.219-230
• /
• 2005

Objectives : This study was designed to compare the demographic data, clinical characteristics, developmental delay, and psychological tests between childhood-onset and adolescent-onset schizophrenic in-patients. Methods Medical records of the 17 childhood-onset (very early onset) Schizophrenia and 16 adolescent-onset (early onset) Schizophrenia in-patients were reviewed. Sex, age, psychiatric past history, prodromal symptoms and period, subtype, co-morbid disease, developmental delay, prescribed drug and dosage, treatment response, intelligence quotient (IQ), and Rorschach test were evaluated. Results : The mean admission age of childhood-onset (very early onset) group and adolescent-onset (early onset) group were 12.69$({\pm}2.34)$ and 15.13$({\pm}1.04)$ years. The mean onset age of childhood-onset(very early onset) group and adolescent-onset (early onset) group were 10.79$({\pm}1.95)$ and 14.46$({\pm}0.82)$ years. The mean prodromal period of childhood-onset (very early onset) group and adolescent-onset (early onset) group were 15.94$({\pm}12.33)$ and 8.06$({\pm}6.10)$ month. The time to remission period of childhood-onset (very early onset) group and adolescent-onset (early onset) group were 50.58$({\pm}24.67)$ and 30.06$({\pm}18.04)$ days. Longer time to remission period in childhood-osnet (very early onset) group was associated with earlier age of onset. The mean of total IQ, performance IQ, verbal IQ were at an average level. Discussion : Childhood-onset (very early onset) group and adolescent-onset (early onset) group Schizophrenia had different clinical and psychological features including prodromal period, and IQ subtests.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.83-88
• /
• 2007

The spray characteristics and liquid column penetration of steady and pulsed injection measurements have been experimentally studied using high speed camera in liquid jets injected into subsonic crossflow. The objectives of this research are to comparison the spray characteristics of steady injection with pulsed injection. Moreover. the effects of frequency are also studied. As the result, This research has been showed that pulsed injection has different penetration compared with steady injection.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.267-274
• /
• 2009

Breakup and spray formation of pressure-swirl liquid jets injected into a low-speed convective-flow are experimentally investigated. Effects of the cross-flows on the macroscopic and microscopic spray parameters are optically measured in terms of jet Weber number and liquid-to-gas momentum ratio. The liquid stream undergoes Rayleigh jet breakup at lower jet Weber numbers and a liquid sheet isn't formed because of the weak radial velocity in the swirl jet. At higher jet Weber numbers, the macroscopic spray parameter is a very weak function of the momentum ratio but the effect of the convection on the microscopic spray parameter is significant through the secondary breakup with increasing in the liquid-to-gas momentum ratio. The convective-flow promotes bag/plume breakup and the spray formation, and its effect is more distinct at higher momentum ratio.

• Journal of agricultural medicine and community health
• /
• v.24 no.2
• /
• pp.351-368
• /
• 1999

The objective and subjective burden was evaluated toward 115 main caregivers in the family with schizophrenic patient by interview with structured questionnaire and self-report using Family Burden Scale (FBS) of family with schizophrenic patient in Korea. The results were as follows : 1) The mean age of onset by schizophrenic patient were 23 years old in male and 26 in female. 2) The mean scales of objective and subjective burden were 1.5 and 1.6. 3) By Logistic regression objective burden was significantly affected by family support (P<0.001), religion (P<0.05), occupation (P<0.05). 4) Subjective burden was significantly affected by family support (P<0.01) and family total income (P<0.05). 5) Total objective and subjective burden was significantly affected by family support (P<0.001), religion (P<0.05). In conclusion, this study suggests that main caregivers need family support from other family members. For them religion and social support are also helpful to cope with the burden to take care of the schizophrenic patients.

• Journal of fish pathology
• /
• v.11 no.1
• /
• pp.13-22
• /
• 1998

To know the features of Amyloodinium sp. parasitized in Black seabream, Acanthopagrus schlegeli, morphology and reproduction type of the parasite were investigated. Infection mode and histopathology of the parasites were also studied. In the developmental and morphological observation, the parasite passed through parasitic and non-parasitic phases with three developmental stages termed trophont, tomont, and dinospore. The trophont, 30-$80{\mu}m$ ovoidal or pyriform, for the vegetative stage had a spherical nucleus with $1.5{\mu}m$ in diameter, many food vacuoles and starch grains in cytoplasm. The tomont, 80-$90{\mu}m$ spherical, for the reproductive stage resorbed a stalk, secreted a cyst wall and reproduced within it. A dinospore, small 10-$15{\mu}m$ biflagellated, for the infestation stage had a stigma. The parasite was propagated for 15 days by serial passage in Korean rockfish (Sebastes schlegeli) at $25{\pm}1^{\circ}C$. Trophonts began to detach from the fish about 3 days after infection and was completed within 5 days at $25{\pm}1^{\circ}C$. It took from 3 to 5 days to reproduce at the same temperature. Reinfected fish showed that parasites penetrated under the epithelia of gill filament and gill lamellae causing hyperplasia and degeneration at infected area.