• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.115-115
• /
• 2017

티타늄에 있어서 주요 침입형 원소인 산소는 결함을 일으키는 원인으로 산소함량을 줄이는 연구가 활발히 진행되고 있다. 최근 가장 많이 이용되는 탈산 방법은 칼슘 및 칼슘염화물의 높은 산소 친화력을 이용하는 것이다. 칼슘염화물 플럭스를 사용하여 칼슘을 용해하고, 티타늄과 반응한 탈산생성물인 칼슘산화물을 플럭스 내에 용해시키는 방법이다. 이러한 방법으로 티타늄 와이어 및 시트 내 산소를 저감한 연구가 보고되었다. 티타늄 탈산의 제일 큰 구동력은 티타늄 내 산소원자의 확산이다. 티타늄의 탈산온도가 1,155K 이상으로 증가하면 hcp에서 bcc 구조로 변태되는데 이러한 구조에서 산소의 확산은 더 활발해진다. 실제로 티타늄의 변태온도 이전에서는 확산속도가 낮아서 큰 변화가 없지만, 1,273K 고온의 bcc 구조에서는 확산속도가 빨라서 그 이전에 비해 100배 이상 빠르게 원자 이동이 일어나는 것으로 알려져 있다. 하지만 이러한 탈산 방법은 티타늄 원재료가 벌크 형태에서 주로 연구되었으며 티타늄 분말에 대한 탈산 연구는 보고된 바가 많지 않다. 이는 높은 탈산온도에서 칼슘의 용해로 인한 분말의 건전한 회수가 어렵기 때문이다. 이러한 문제를 해결하기 위해 본 연구진은 칼슘 증기를 이용한 비접촉식 탈산 용기를 제작하여 티타늄 분말을 변태온도 이상에서 탈산하여 1,000ppm 이하 저산소 티타늄 분말을 회수하였다. 칼슘을 이용한 티타늄 내 산소의 제거 메커니즘을 깁스자유에너지와 각각의 분압에 의해 설명하고 있다. 가장 일반적인 설명은 티타늄 내 산소가 탈산온도에 따라 확산하게 되며 이러한 산소는 티타늄의 표면에서 티타늄 산화층을 형성한다. 이때 탈산제인 칼슘의 높은 산소 친화력으로 티타늄 산화층은 분해되어 칼슘산화물을 형성한다. 이러한 과정으로 티타늄 내 산소가 제거되는 것으로 알려져 있다. 하지만 많은 탈산 연구에도 불구하고 대부분의 연구 보고에서는 탈산 전후의 산소 농도 변화만 측정하였으며, 실제적으로 티타늄 탈산 전후의 표면산화층의 변화, 티타늄 내부의 산소농도 변화 및 격자 변형에 대한 연구는 보고된 바 없다. 따라서 본 연구는 1,000 ppm 이하 저산소 티타늄 분말 제조에 있어서 탈산 전후 표면 산화층 및 내부 산소 농도 등을 분석하여 탈산 거동에 대해 관찰하였다. 본 연구에서 비접촉식 탈산용기를 이용하여 칼슘 증기에 의한 탈산에 의하여 1,000 ppm 이하 저산소 티타늄 분말 제조하였고, 탈산된 분말을 티타늄 원재료와 비교하여 표면 산화층, 격자 변형, 내부 산소 농도 등을 분석하여 탈산에 따른 산소 거동을 살펴보았다. 탈산된 티타늄 분말의 표면 산화층은 원재료 대비 73% 제거되어 약 3nm로 줄었음을 확인하였고, 또한 표면 산화층 감소뿐만 아니라 티타늄 분말 내부에서도 원재료보다 산소 농도가 감소하였음을 확인하였다.

• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.12-17
• /
• 2010

The purpose of this study is to determine how effectively waste tire recycled material mixed with flame retardant work in combating fire. As discovered in the previous study, waste tire mixed with cement mortar has more insulation capacity. However, this mortar is weak against fire. Therefore flame retardant, with a specific proportional mix, will be added to increase its fire prevention capacity. Tests will be made in accordance with ISO 5657 procedures for measuring fire ignition time, flame and shape variation of test pieces at the Building Material Test Institute. The test piece will be set up with horizontal levels having a constant radiation heat of $1{\sim}5W/cm^2$. Temperature transfers and increases from the surface into the interior. Combustible gases result due to pyrolysis, and regular contact is maintained between the fire source and the center of the test piece for assessment purposes. Ignition has not been occurred without adding retardant meaning that there is almost no possibility of ignition of waste tire particle. This fact can be considered as fire load to appreciate a volume of combustion materials. Flame is not occurred due to heat-absorbing effect by adding non-organic series retardant into waste tire particle. Conclusions have been summarized as follows; 1) Combustion of building material can be decreased by adding retardant to waste tire-mixing mortar. But compressive strength and insulation capacity of the material should be measured later. 2) Firing prevention and ignition are main points of building fire. Reasonable fire engineering assessment of interior material should be made for establishing effective disaster prevention system.

• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.311-320
• /
• 2000

In this paper a newly designed oxygenator module was used to perform the experiments for pressure drop and oxygen transport in order to evaluate the efficiency of the artificial lung. Also, distilled water. sodium sulfite solutions used in this experiment were evaluated for the performance of other artificial lungs. Substituted bloods have many advantages over whole blood in studying pressure drop and oxygen uptake. They are relatively inexpensive, and require fewer variables to be controlled. Furthermore, deoxygenation is not necessary when those solutions are used. In addition to these advantages. assays and interpretation of the experimental results are relatively easy. In the case of using the sodium sulfite solution having the same oxygen partial pressure as whole blood. the oxygen transfer rate of the sodium sulfite solution was basically same as that of whole blood. It was concluded in evaluating the function of artificial lungs that the sodium sulfite solution was suited for measuring oxygen transfer rate. In our module, artificial blood was flowed into the outside of hollow fiber membrane. The artificial lung created in this experiment showed that pressure drop was reduced to $1/3\~1/6$ of that compared to the inside-flow case.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.2
• /
• pp.231-238
• /
• 1999

Background: Nocturnal hypoxemia occurs in patients with chronic obstructive pulmonary disease(COPD) and the detection and treatment of nocturnal hypoxemia should be part of the management of COPD patients. We performed this study to evaluate the factors influencing to sleep related arterial oxygen desaturation($SaO_2$) in patients with COPD. Methods: Resting and exercise cardiopulmonary function test, polysomnography, and $SaO_2$ during resting, exercise and sleep were measured in 12 patients with COPD. Results: The $SaO_2$ fell twice as much during sleep as during maximal exercise($13.1{\pm}9.3%$ fall in nocturnal $SaO_2$ vs. $6.4{\pm}3.3%$, p<0.05). Fall in nocturnal $SaO_2$ was well correlated with mean exercise $SaO_2$(r=-0.78, p<0.05), minimum exercise $SaO_2$(r=-0.90, p<0.01), and resting $SaO_2$(Cr=-0.82, p<0.05). Lowest sleep $SaO_2$ was well correlated with mean exercise $SaO_2$(r=0.80, p<0.05), lowest exercise $SaO_2$(r=0.90, p<0.01), and resting $SaO_2$(r=0.84, p<0.05). Conclusion: Resting and exercise $SaO_2$ was well correlated with nocturnal $SaO_2$, but exercise study add no additional information to predicting the nocturnal oxygen desaturation in patients with COPD.

• Journal of the Korean Geographical Society
• /
• v.38 no.2
• /
• pp.184-205
• /
• 2003

Sustainable Development(SD) is an important concept for the future of the coastal area, and for development of fishing villages. Since 1992 UN Conference on Environment and Development in Rio de Janeiro many governments and local authorities throughout the world have been engaged in preparing and implementing $\ulcorner$Agenda 21$\lrcorner$. Many projects which previously would have been identified as environmental protection are now presented under the banner of sustainable development. Integrated Coastal Management (ICM) is an extension of sustainable development. ICM was presented as a framework for resolution of coastal use conflicts. The aim of the present paper is to assess sustainable development potential of fishing villages in Cheonsu Bay Region according to implementation of ICM. Cheonsu Bay Region was known as one of the productive fishing grounds and Cheonsu Bay Region preserved unique characteristics of traditional fishing villages. But this region is now experiencing many changes through the massive reclamation projects like Seosan A B Project. After a brief overview of concepts and history of SD and ICM, the reclamation process and its impacts on both fishery and fishing communities in Cheonsu Bay Region are discussed. According to their changing environmental and socio-economic characteristics after the reclamation, ca 35 representative coastal villages in this region can be classified into 5 types. Many coastal villages shows diversity in their economic activities, as tourism and recreation function becomes more and more important in this region. In present-day Cheonsu Bay Region, it is possible to differentiate fishing village cooperatives(FVO) with high potential of sustainable fishery development, FVOs with medium potential, FVOs with low potential on the basis of 14 selected indicators.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.4
• /
• pp.327-342
• /
• 2021

The global coastal region is considered as a sink for atmospheric CO₂. Since most of the studies in the East Sea focused on the Ulleung Basin, the importance of coastal region for carbon cycle has been overlooked. In this study, we compared the biological pump and CO₂ absorption between the Ulleung Basin and coastal region by surface measurements of biological O₂ supersaturation (𝚫O₂/Ar) and partial pressure of CO₂ (fCO₂). Cold and less saline waters in the coastal regions were in contrast with a warm and saline water in the Ulleung Basin. The coastal waters near Samcheok and Pohang showed higher fluorescence, 𝚫O₂/Ar, and lower fCO₂ than those in the Ulleung Basin, indicating higher primary production and CO₂ absorption in the areas. The average net community production estimated by 𝚫O₂/Ar were 19 ± 6 and 60 ± 9 mmol O₂ m^-2d^-1 in the Samcheok and Pohang, respectively, 2-7 times higher than that of 8 ± 4 mmol O₂ m^-2d^-1 in the Ulleung Basin. Similarly, the average CO₂ flux between the seawater and atmosphere were -17.1 ± 8.9 and -25.8 ± 13.2 mmol C m^-2d^-1 in the Samcheok and Pohang, respectively, 4-5 times higher than that of -4.7 ± 2.5 mmol C m^-2d^-1 in the Ulleung Basin. In the Samcheok and Pohang, degrees of N₂ saturation were lower by 3% than that the ambient waters, suggesting the possibility of nitrogen fixation by primary producers.