• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.674-677
• /
• 2005

As a passive soundscape facility, fountain is a useful way to give place such as public square, park identity and vitality. In this study, to know the optimistic distance and sound level range from fountain, sound levels due to distance were measured and subject responses were checked by questionnaire. Levels from 56dB to 68dB are recommended by subjects and moving forward to fountain decreases less comfort ratio than backward Moving forward 5m and backward 5m(total range 10m), there is little difference in comfort ratio. The results of this study could used for street furniture location design and P.A system output level.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.12
• /
• pp.75-82
• /
• 2010

This paper presents a wideband ${\Delta}{\Sigma}$ fractional-N frequency synthesizer for a multi-band single chip CMOS RFIC transceivers. A wideband VCO utilizes a 6-bit switched capacitor array bank for 2340~3940 MHz frequency range. VCO frequency calibration circuit is designed for optimal capacitor bank code selection before phase locking process. It finishes the calibration process in $2{\mu}s$ over the whole frequency band. The LO generation block has selectable multiple division ratios of ${\div}2$, ${\div}16$, and ${\div}32$ to generate LO I/Q signals for T-DMB/DAB/FM Radio systems in L-Band (1173~1973 MHz), VHF-III (147~246 MHz), VFH-II (74~123 MHz), respectively. The measured integrated phase noise is quite low as it is lower than 0.8 degree RMS over the whole frequency band. Total locking time of the ${\Delta}{\Sigma}$ frequency synthesizer including VCO frequency calibration time is less than $50{\mu}s$. The wideband ${\Delta}{\Sigma}$ fractional-N frequency synthesizer is fabricated in $0.13{\mu}m$ CMOS technology, and it consumes 15.8 mA from 1.2 V DC supply.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.113-119
• /
• 2001

In this paper, we propose an improved watershed algorithm that resolves the oversegmentation problem shown in the previous watershed algorithm and its modifications when the spatial video segmentation is performed. The principal idea of the proposed algorithm is merging the shallow catchment basin whose depth is less than a given threshold into the deeper one during flooding step. In the flooding process, the growth of the existing catchment basins and the extraction of newly flooded ones are accomplished. We present the experimental results using several MPEG test sequences in the last part of the paper. As a consequence, the proposed algorithm shows good segmentation results according to the thresholds applied by adding very small amount of calculations.

• Journal of KSNVE
• /
• v.9 no.4
• /
• pp.835-840
• /
• 1999

Cause of excessive vibration signals with twice the rotational speed of a 2-pole generator rotor in balancing for fossil power plants was investigated. The 2-pole generator rotor is treated as a typically asymmetric rotor in vibration analysis, and produces asynchronous vibration with twice the rotational speed for its own inertia and stiffness asymmetry. This paper introduces practical balancing procedure and experimental vibration data of the asymmetric 2-pole rotor in balancing, and presents the results of investigation into sources of the excessive vibration signals.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1314-1321
• /
• 2004

The non-linear responses of a slender rectangular cantilever beam subjected to lateral harmonic base-excitation are investigated by the 2-channel FFT analyzer. Both linear and nonlinear behaviors of the cantilever beam are compared with each other. Bending mode, torsional mode, and transverse mode are coupled in such a way that the energy transfer between them are observed. Especially, superharmonic, subharmonic, and chaotic motions which result from the unstable inertia terms in the transverse mode are analyzed by the FFT analyzer The aim is to give the explanations of the route to chaos, i.e., harmonic motion \longrightarrow superharmonic motion \longrightarrow subharmonic motion \longrightarrow chaos.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.6 s.99
• /
• pp.712-717
• /
• 2005

This paper presents a system identification method for multi-input, multi-output (MIMO) systems, by which a rational polynomial transfer function model is identified from experimentally determined frequency response function data. Analytically determined information is incorporated in this method to obtain a more reliable model, even in the frequency range where the excitation energy is limited. To verify the suggested method, shaking table test for an actively controlled two-story, bench-scale building employing an active mass damper is conducted. The results show that the proposed method is quite effective and robust for system identification of MIMO systems.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.25-28
• /
• 2007

본 논문은 KOMPSAT-2호 및 3호의 화상활용 일환으로 임반 단위의 임상정보 추출에 관한 시범연구이다. QuickBird 화상을 통해 획득한 결과를 요약하면, 첫째로 회색단계공발생 행렬(GLCM)에 기초한 질감(texture)매개변수 화상은 소나무림과 잣나무림의 임상판별을 가능하게 만든다. 단, 동령림 조건과 사면 방위에 무관한 상태의 추가연구가 요구된다. 둘째로 Matlab의 분수계(watershed)산법에 기초한 분할화상에서 소나물김과 잣나무림의 수관투명 면적 대소를 파악할 수 있다. 역시 동령림 조건하의 보충 연구가 필요하다. 셋째로 형태배율과 진원도(roundness)에 기초한 소나무림과 잣나무림의 구별에서 진원도에서는 차이의 유의성이 없고, 형태배율에서는 수관둘레의 불규칙에 의해 유의성있게 구분된다. 본 연구의 임상정보 추출기법은 정밀임업의 정량정보 제공에 기여할 것이다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.1
• /
• pp.51-62
• /
• 2003

A new video segmentation algorithm for segmentation-based video coding is proposed. The method uses a new criterion based on similarities in both motion and brightness. Brightness and motion information are incorporated in a single segmentation procedure. The actual segmentation is accomplished using a region-growing technique based on the watershed algorithm. In addition, a tracking technique is used in subsequent frames to achieve a coherent segmentation through time. Simulation results show that the proposed method is effective in determining object boundaries not easily found using the statistic criterion alone.

• Journal of Power System Engineering
• /
• v.5 no.4
• /
• pp.44-52
• /
• 2001

This paper considers a modeling and identification for the MIMO magnetic bearing system. To obtain the nominal plant transfer functions, we have experimented on the frequency response by a closed-loop identification method because the system is unstable essentially. We suggest a method of curve-fitting for obtaining the transfer function from the frequency responses by using the system's modeling structure and two controllers which are different from each other. From the frequency response results, we found the effects of coupling by opposing controllers. And using this effects and the system's modeling structure, we could obtain the transfer functions of which have the same modularized denominators.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.8
• /
• pp.60-67
• /
• 1998

We studied the effects of fractional fourier transform in face recognition, in which only the amplitude spectra of transformed facial images were used.We used two recently developed face recognition methods, the most effective feature (MEF) method (i.e., eigenface method) and most discriminating feature (MDF) method, and the effects of th etransform for th etwo methods were consistent. We confirmed that the recognition rate by the use of MDF method is better than that consistent. We confirmed that the recognition rate by the use of MDF method is better than that by MEF regardless of the order to transform, these methods provided slightly better results when the order was 1 than for any other order values. Only when the order was close to 1, the recognition rates were robust to the shift of the input images, and the trend that the recognition rates decreased as the input size varied was independent of the order. From these results, we fond that it is most advantageous to use the amplitude spectra of the conventional fourier transform whose order is 1.