• Cement
• /
• s.130
• /
• pp.26-34
• /
• 1993

For the purpose of increasing the quality of products and reducing the grinding cost of cement clinker, some aids were studied. Some of common grinding aids, such as Ethylene Glycol, Diethylene Glycol, Triethanolamine and so on, lead to the environmental

• Journal of Energy Engineering
• /
• v.28 no.1
• /
• pp.1-9
• /
• 2019

In the flue gas desulfurization process of the coal-fired power plant, the grinding efficiencies of the limestone as the sorbent for desulfurization were compared after BWI and HGI measurements. As a result, the grinding index of the domestic desulfurization limestone were linear inversely proportional relationship with decreasing BWI was observed with increasing HGI. There was a difference in grinding efficiency depending on the chemical composition and crystal structure. Therefore, it is considered that when grinding ability of limestone is measured, the grinding property of the sample can be confirmed even by using HGI which can be measured more easily than BWI which is difficult to measure and takes a long time. The desulfurization efficiency can be improved by selective utilization of limestone depending on the crushing characteristics.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.685-691
• /
• 2013

Ibuprofen, non-steroidal anti-inflammatory drugs; NSAIDs, is a highly crystalline substance with the pharmaceutical properties of poor solubility and low bioavailability. The size reduction of ibuprofen is needed to improve the solubility. The objective of this study is to optimize the grinding condition of ibuprofen. Grinding of ibuprofen was carried out using a planetary mill. Grinding parameters were optimized using Box-Behnken experimental design method. The physical characteristics of ground ibuprofen were investigated for the particle size by particle size analyzer, for the crystal size by X-ray diffraction (XRD), and for the tensile strength by tensile/compression tester. The optimum conditions for the milling of ibuprofen were 290 rpm of the revolution number of mill, 24.6 g of the weight of sample, and 10 minutes of grinding time. The measured value of the particle size of ground ibuprofen at these optimum conditions was $13.5{\mu}m$. The results showed that the crystal size of ibuprofen was reduced by the planetary milling process. In case the relative density of the tablets formulated of ground ibuprofen was range of 0.85~0.90, the tensile strength of them was range of 1$2{\sim}14Kg_f/cm^2$.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.179-190
• /
• 2003

The grout based on solution type makes it difficult to get the improvement of ground strength and the effefct of water curtain because it has lower strength and durability than suspension type. Nowadays, the technology of particle acceleration, that enhance the material permeability, such as grout based on solution type, and inexpensive grout, is being required. For these reasons, in this study, using wet milling system, we evaluated physical properties of manufactured factors such as water-cement ratio of particles before being milled, optimum milling capacity by controlling milling time and rpm, viscosity of materials, permeation coefficient, and unconfined compressive strength. Also, using micro wet milling apparatus which could manufacture ordinary Portland cement and high speed shear mix which could forcefully separate conglomerate particles in situ, we performed electrical resistivity investigation and falling head permeability tests to analyze differences of grouting effects. From these results, we found that the permeability of the applied equipment was much superior, and in the case of using high speed shear mixer, particles of grout material were well separated.

• Journal of Biosystems Engineering
• /
• v.9 no.2
• /
• pp.81-88
• /
• 1984

현재 축산농가에서 쉽게 구할 수 있는 곡류, 조사료 및 부산물을 활용하여 사료의 자급율을 높이는 것은 농가의 소득증대를 위하여 바람직한 일이다. 이러한 사료의 자급자족 체계를 위하여 소형이며 조작이 간편한 사료분쇄기가 요구된다. 따라서 농가에 많이 보급되어 있는 5~10 마력 (3.7-7.5 kw)의 동력경운기에 의하여 작동될 수 있는 소형 햄머타입의 사료분쇄기 시작기를 설계 제작하였다. 그리고 시작기의 성능을 분석하기 위하여 보리, 옥수수, 볏짚, 건초를 사료로 하여 시료의 공급율과 스크린의 구멍크기를 변화시켜가며 실험을 수행하였다. 이상과 같은 햄머 밀 시작기의 설계 및 성능시험을 통하여 얻어진 결과를 요약하면 다음과 같다. 1. 시작기의 평균분쇄능력은 보리의 경우 평균입자직경이 543 마이크론일 때 $82.7kg/kw{\cdot}h$였으며, 옥수수의 경우에는 평균입자직경이 408 마이크론일 때 $132.7kg/kw{\cdot}h$였다. 2. 최대 공급율로 분쇄할 때 소요동력은 보리의 경우 1.9kw, 옥수수의 경우 5.3kw, 볏짚의 경우 1.5kw, 건초의 경우 1.6kw을 필요로 하였으며, 5-10 마력(3.7-7.5kw)의 동력경운기로 개발된 햄머 밀을 작동함에는 별 문제가 없는 것으로 분석되었다. 3. 시작기로 시료를 분쇄할 때 곡류 분쇄는 물론 조사료 분쇄도 가능한 것으로 분석되었다. 4. 시작기에 의해 시료를 분쇄했을 때 분쇄물의 평균온도 상승폭은 $7.2-10.0^{\circ}C$였다. 이러한 온도는 분쇄물의 영양소 파괴및 저장상의 안정성을 고려할 때 안전한 범위의 온도상승으로 판단되었다. 5. 원료공급율과 스크린 구멍크기가 분쇄량과 분쇄정도에 5% 수준에서 유의성 있는 영향을 미쳤다.

• Cement Symposium
• /
• no.19
• /
• pp.54-58
• /
• 1991

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.133-137
• /
• 2011

In this study, illite was size-reduced using a wet-ball-milling treatment to improve its dispersion. Changes in illite particle size, size distribution, and dispersion characteristics after varying the treatment period were investigated. And the dispersion and dispersion stability of illite solution after 2 h wet ball milling treatment with different pH conditions were also evaluated. The illite particle size significantly decreased as the treatment time increased and the size reduction effect of wet ball milling deteriorated above 2 h treatment time. In addition, illite particle size was more evenly distributed as the treatment time increased. X-ray diffraction (XRD) analysis showed that no crystal structural changes of illite were induced, but the characteristic peak of illite the weaker due to the size reduction and exfoliation, as the treatment time increased. Zeta potential analysis showed that the illite dispersion improved, as the treatment time increased. The illite wet-ball-mill treated at pH 2 had the lowest dispersion stability. Illite dispersion and dispersion stability increased as pH increased, due to the increase in surface ionization. Hence, the results showed that as the treatment time increased, the illite particle size decreased, and dispersion and dispersion stability improved due to the increase in surface energy and repulsion force between particles.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.3-10
• /
• 2002

The characteristics of dry and wet milled powder prepared by 1 cycle OREOX (oxidation and reduction of oxide fuels) treatment were investigated using the simulated spent fuel pellet. Sintered pellets simulating spent nuclear fuel burned in reactor were fabricated from $UO_2$ powder using as a starting material in fabrication of nuclear fuel. The 1 cycle OREOX-treated powder was prepared by only one path of oxidation md reduction of the simulated pellet. Powder having average particle size of less than 1 $\mu\textrm{m}$ could be easily obtained by dry milling, but not be achieved by wet milling. And, specific surface area of dry milled pow-der was higher than that of wet milled powder. Dry milled powder formed loose agglomerate, while wet milled powder showed the shape of irregular and angular particles. Dry milled powder provided higher green density, resulting in higher sintered density of higher than 95% TD and average grain size of larger than 8 $\mu\textrm{m}$ satisfying the standard specification of sintered pellets.

• Cement
• /
• s.28
• /
• pp.51-57
• /
• 1969

• Cement Symposium
• /
• s.36
• /
• pp.116-126
• /
• 2009