• Microbiology and Biotechnology Letters
• /
• v.14 no.3
• /
• pp.233-237
• /
• 1986

Possibility of large scale ethanol fermentation from sweet potato were compared with low temperature and high temperature rooking. Productivity of sweet potato mash cooked at 9$0^{\circ}C$ for 120 minutes was higher than that mash cooked at 124$^{\circ}C$ for 60 minutes and also fermentation yield ai low temperature cooking was better than high temperature cooking. Low temperature cooking was successfully carried out on a large scale. In conclusion, low temperature cooking on large scale should be reduce energy consumption by approximate 30% compared with high temperature cooking.

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.215-221
• /
• 1993

A required initial condition for a steam explosion to occur following core meltdown accidents of a nuclear power plant is the formation of a coarse mixture of molten fuel and water. The extent of a premixing is the measure of efficiency of steam explosion that may follow. A simple one-dimensional, transient model and the flooding criteria have been applied to evaluate the fuel/coolant mixing limit. Also, both instant breakup and dynamic breakup models for the mixing process have been separately used here and compared each other. The results indicate that fuel temperature, ambient pressure, mixing diameter, water depth, and pouring diameter are the important parameters affecting the mixing behavior.

• Investigative Magnetic Resonance Imaging
• /
• v.17 no.1
• /
• pp.59-62
• /
• 2013

There are various types of foreign body reactions, such as inflammation, edema, fluid collection, hematoma, infection, abscess and granulomas. There are various imaging findings according to types of foreign bodies and depending on the lapse of time. Therefore, correct diagnosis of a foreign body reaction is difficult and easily confused with soft tissue neoplasm. The MRI is ideal for the detection of foreign bodies regardless of radiolucency or acoustic impedance. It is especially very useful in the evaluation of the surrounding tissue reaction. The authors report a case of a 26-year-old female patient with both forearm swelling due to self-injection of a mixture of powdered tablets and saline. The lesion shows numerous internal T1 and T2 dark signal intensity micro-spots with surrounding fluid collection, which are diagnosed as foreign bodies with surrounding inflammatory changes during an operation.

• Journal of Energy Engineering
• /
• v.4 no.3
• /
• pp.379-386
• /
• 1995

0.5 T/D 용량의 슬러리를 이용한 분류층가스화기에서의 인도네시아 탄인 Roto탄을 이용한 가스화 실험을 통하여 개발된 가스화기의 성능과 석탄가스화 특성을 파악하였다. 200 mesh 이하로 분쇄된 미분탄을 62.5%(H2O/coal=0.6)로 물과 혼합된 슬러리를 0.5%의 유도화제와 화재의 20%의 CaO를 화재의 융점강하를 위하여 첨가시켰다. 화재의 융점이 1511$^{\circ}C$에서 130$0^{\circ}C$까지 떨어진 것이 관측되었다. 생성된 슬래그는 Quenching 부위에서 물에 의한 급랭으로 인한 열 충격으로 1~2 cm의 크기로 분쇄되었다. 실험결과 생성된 가스는 CO는 O2/coal의 비가 증가할수록 감소하였고, H2 및 CO2는 증가하는 것으로 관찰되었다. 생성된 가스의 발열량은 천연가스의(10,000 Kcal/Nm3)/약 1/8인 1700~1300 Kcal/Nm3로 측정되었다.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.6
• /
• pp.394-399
• /
• 2013

The recalcitrant hairs which are accumulated in the U-trap equipped to prevent the stench from the drainage produce the phenomenon of blocking the flow of water through the home drainage pathway. The chemical dissolution solutions commercially manufactured are excessively poured into U-trap to solve this blocking problem. In this study, the specially designed instrument was developed for the experiments to cut and crush the hairs of which main component are the recalcitrant keratin proteins. The performance of the instrument for cutting and crushing hairs was investigated using experimental methods. The cutting and weighing method was used in order to obtain the average length of a large amount of hairs cut by instrument. This method is relatively simple to measure the weight of cutting hairs to obtain the average length of the fibers, the values of average length showed not greater tolerances. Also the average cutting number was defined to evaluate the performance of the cutting and crushing instruments designed for this study. We were able to apply these evaluation methods to provide the criteria to obtain the optimal structure of instrument and proper operation time in the given experimental conditions. These experimental methods and results will provide the good example to design and to analyze the various device that can be used for cutting the fibers. The cutting and crushing instrument developed in this study showed the effective abilities to cutting the hairs. The general using the cuttting and crushing instrument at every home would be helpful to prevent water environmental pollution.

• Elastomers and Composites
• /
• v.40 no.2
• /
• pp.104-111
• /
• 2005

Virgin fluororubber(FKM) that is one of the highly-functionalized and expensive special rubber, and recycled FKM that is crushed by high temperature shear-crushing technique from recycled FKM were blended with the various mixing ratio to rubber blends. The cure characteristics and physical properties of these blended rubber compounds were investigated with various contents of recycled FKM and physical properties fur heat and fuels were also measured. Recycled FKM which is prepared by high temperature shear-crushing technique were blended to virgin FKM with the range of $0{\sim}50$ phr. The physical properties indicated that the rubber blend of recycled FKM with 30 phr turned out to be the best compound showing good dispersibility, heat resistance and fuel resistance and inexpensive in price.

• Resources Recycling
• /
• v.25 no.1
• /
• pp.3-9
• /
• 2016

The leaching behavior of gold from waste CPU chip using Iodide/Iodine solution was studied. The direct leaching of gold with Iodide/Iodine solution for CPU chip under the size of 150 mesh showed leaching ratio of 20%. It was assumed that the copper film was produced on the gold particle during grinding process and the copper film prevents lodine/Iodide solution from contacting with leachable gold. Meanwhile, the extraction of gold was improved to 90% by pretreatment process with $HNO_3$ solution. In order to explain the result, EDS and ICP analysis for the leaching residue were conducted. It was found that the copper coated on the surface of the gold particle was removed about 80% by $HNO_3$, resulting in the increment of gold leaching rate.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.121-129
• /
• 2023

In this study, we attempted to reduce CO₂ generated during manufacturing by replacing limestone (CaCO₃), a carbonate mineral used to produce cement clinker, with a decarbonated raw material to which CO₂ is not bound. The raw material for decarbonization was cement paste attached to waste concrete, among various industrial by-products. Waste concrete has cement paste adhered to the aggregate, which cannot be separated efficiently by general crushing and grinding methods. Peeling and grinding methods effectively remove only the cement paste without damaging the original aggregate. The abrasion time, steel ball type, and steel ball ratio were selected as effective factors for Abrasion. An optimal abrasion experiment was conducted to produce waste concrete fine powder containing decarbonated CaO as a cement clinker raw material through an experimental design method. The experiment revealed that the optimal conditions for producing waste concrete fine powder were an abrasion time of 7 minutes, a steel ball size for pulverization of 8 mm, and a steel ball ratio for pulverization of 0.6.

• Food Science and Preservation
• /
• v.23 no.1
• /
• pp.20-26
• /
• 2016

In this study, the anti-inflammatory effect of hyaluronidase (HAase) inhibition was determined from 92 species of oriental herbal medicine extracted with water and ethanol solvents because of their non-toxicity in the human body. The water extracts of Evodia officinalis (86.8%), Thuja orientalis (80.8%), Carthami semen (66.5%), Melia azedarach (74.7%), Siegesbeckia pubescens (61.3%), Saururus chinensis (49.15%) showed a relatively greater anti-inflammatory activity. The ethanol extracts of Ailanthus altissima and Saururus chinensis demonstrated the highest anti-inflammatory effect at above 90%. Saururus chinensis was selected for its high anti-inflammatory effect in both water and ethanol extract. Ethanol was more effective than water and optimal extraction conditions for phenolic compounds was determined to be extraction with 50% ethanol for 12 hours. The extracts from Saururus chinensis in optimal condition showed 70~80% anti-inflammatory effect when $100{\sim}250{\mu}g/mL$ phenolic concentration was treated. Concentration of above $500{\mu}g/mL$ decreased the inhibitory effect. The anti-inflammatory effect and extraction yield were increased by ultra-fine grind technology, indicating that this method can be used to increase the extraction yield of phenolic compounds from medicinal plants.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.385-386
• /
• 2010