• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.30-34
• /
• 2005

고속 선박을 추진하는 한 방법으로 널리 사용되는 물분사 추진은 물을 내부 덕트로 빨아들여 임펠러로 물을 가속시켜 노즐을 통해 분사시킴으로써 입출구의 운동량차이에 의해 추력을 얻는 추진장치이다. 선박의 목적에 따라 사용되는 다양한 형태의 물분사 추진기의 개발을 위하여 모형실험을 통하여 그 성능을 검증하는 부분에서 로터의 피치각 변화에 따른 추진기의 성능 실험을 하는 것은 많은 비용과 시간이 따른다. 따라서 이러한 문제를 해결하기 위하여 본 연구에서는 추진기 내부의 유동장을 4가지 피치각에 따라 추진력을 3차원 비압축성 Navier-Stokes 방정식을 이용하여 해석하였다. 로터의 회전을 고려하여 슬라이딩 다중 격자기법을 적용하였고 추력계수, 토크계수, 그리고 모멘텀을 해석 결과와 비교 분석을 통하여 추진기의 성능과 효율을 추정하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.11-18
• /
• 2001

To clarify the influence of SAC shape of hole-type diesel nozzle on injection characteristics and spray patterns, the injection rate of three nozzle types(standard SAC nozzle, Needle-cut VCO nozzle and VCO nozzle) were measured by Zeuch's method and pictures of the sprays were taken by CCD camera. As the pump speed became higher, the injection characteristics of the three nozzles were different. Injection rate and perssure curves at the high pressure pipe in Needle-cut VCO nozzle were much more similar to the VCO nozzle than those of the SAC nozzle. When the needle was at pre-lift period for all speeds, the spray of the Needle-cut VCO nozzle showed almost the same shape as the SAC type nozzle. There was no differense in spray pattern at the needle full-lift periods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.52-57
• /
• 2003

Common rail injection system is flexible in injection timing, injection duration and pressure in engine. Many researches have reported on the merits in the application of common rail systems. This research investigated on characteristics and performance for single cylinder diesel engine with a common .ail injection system by varying major parameters such as injection timing, injection duration and common rail pressure. The injection timing and injection duration were controlled by electronic pulse generated. and common rail pressure were controlled by PCV driver. The 498cc single cylinder diesel engine was used in this experiment. All data for combustion pressure, injection timing and injection duration were recorded by Labview. Furthermore, this test was focused on how to optimize injection conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.363-367
• /
• 2016

A test section of a supersonic wind tunnel was designed for the analysis of flow characteristics over a backward-facing step with Mach 1.0 slot injection in a supersonic flow of Mach 2.5. The cavity flow of a high-speed vehicle is very complex at supersonic speed, so it is necessary to do experiments using supersonic wind tunnels to verify numerical analysis methods. The previous 2D symmetrical nozzle was replaced with an asymmetrical nozzle. The inviscid nozzle contour was designed using Method of Characteristics (MOC), and the boundary layer thickness correction was reflected by experimental data from the wind tunnel. The results were compared with a CFD analysis. The PID control system was changed to be based on the change of tank pressure. This improved the control efficiency, and the run times of supersonic flow increased by about 1 second. The flow characteristics over a backward facing step with slot injection were visualized by a Schlieren device. This equipment will be used for an experimental study of the film cooling effectiveness over a cavity with various velocities, mass flows, and temperatures.

• Journal of Energy Engineering
• /
• v.15 no.4 s.48
• /
• pp.277-283
• /
• 2006

In this study, butane 100% was used as fuel to verify the real fuel effect such as vapor pressure variation due to temperature change. A MPI fuel injection system for V-6 engine, which has reverse 'L' type cross section to minimize the possibility of liquid phase injection, was composed and one bank was operated under sequential injection scheme. Flow rate were measured according to injection duration, interval, and pressure. Also occurring of liquid phase injection was monitored with varying vaporizer and fuel rail temperature. The result shows that basic characteristics of injection is a relatively difference between air and LPG injection. Under cold start condition, however, the occurrence of liquid injection becomes more severe as the pressure increases, and sufficiently high temperature both in vaporizer and fuel rail is very important to insure gaseous injection. In addition, the temperature of vaporizer plays more important role in keeping LPG vapor state and the reverse 'L' type cross section of the rail is available to prevent liquid injection.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.11a
• /
• pp.49-54
• /
• 2008

나노결정입자와 일반 입자를 이용하여 $60cm{\times}60cm{\times}180cm$의 밀폐 공간에서 연기제거 성능을 평가해보았다. MgO, $CeO_2$, $Al_2O_3$, ZnO, $TiO_2$등의 나노결정입자와 $NaHCO_3$ 등의 일반입자를 사용하였다. 실험은 입자를 30초, 1분, 2분 간격으로 연기에 분사하여 시간에 따른 연기 제거 성능을 관찰해 보았고, 아울러 3, $6\;kgf/cm^2$등의 입자 분사 압력 변화에 따른 연기 제거 성능도 평가해 보았다. 평가 결과, $TiO_2{\fallingdotseq}MgO$ > ZnO > $CeO_2$ > $NaHCO_3$ > $Al_2O_3$의 순으로 연기 제거 성능이 우수하였다. MgO와 $TiO_2$를 분사한 경우 자연스럽게 연기가 제거 되는 속도보다 약 10배 정도로 빠르게 연기가 제거되었다. 분사압력이 $6\;kgf/cm^2$에서 $3\;kgf/cm^2$로 감소하면, 입자가 연기와 부딪히는 힘이 약하고 분출양이 작아서 연기 제거 성능도 아울러 감소한 것으로 판단된다. 연기 제거 성능은 입자의 특성, 분출 압력, 분출 양, 분사 노즐의 크기 등에 영향을 받는다. 따라서 효과적인 연기제거를 위해서는 이러한 조건을 최적화하는 것이 중요하다. 본 연구는 이러한 연기 제거 입자가 실제 화재에 적용하는 것을 최종적 목표로 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.179-182
• /
• 2005

Test of liquid oxygen sub-cooling by helium injection, which is one of the method of temperature conditioning of cryogenic propellant in liquid propulsion rocket, is performed. The sub-cooling effect at different He injection flow rate with the same initial liquid oxygen mass is compared. Test results showed liquid oxygen temperature decrease of $5\sim6^{\circ}C$ under test condition. And the required time for cooling is inversely proportional to He injection flow rate.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.111-111
• /
• 2017

쇼트피닝 기술은 크게 피로강도 향상을 위한 쇼트피닝(shot peening), 재료의 청정 및 도장 품질 향상을 위한 쇼트블라스트(shot blast) 그리고 쇼트피닝 시 판재의 변형되는 성질을 이용한 핀포밍(peen forming) 등으로 구분할 수 있다. 그 중 본 연구에서는 해양산업 분야에서 널리 사용되는 회주철의 효과적인 내구성 향상을 위해 쇼트피닝 기술을 적용하였다. 그러나 쇼트피닝 기술 적용에 있어서 가장 중요한 것은 제품의 균일성, 정확성, 신뢰성을 확보하기 위해 쇼트피닝 강도를 제어하는 여러 가지 변수들에 대하여 최적 상태를 유지하는 것이다. 따라서 회주철에 대한 최적 쇼트피닝 분사조건 규명작업은 반드시 쇼트피닝 가공 전에 수반되어야만 한다. 그 일환으로 실험은 쇼트피닝 분사시간과 분사압력을 변수로 하여 회주철 표면에 적용하였으며, 기계적 특성 평가를 통해 최적의 쇼트피닝 조건을 규명하고자 하였다. 쇼트피닝 분사조건에 따른 회주철의 내구성을 평가하기 위해 캐비테이션 실험을 실시하였으며, 경도 측정, 횡단면 관찰 및 표면의 3D 현미경 관찰 등을 통해 기계적 특성을 분석하였다. 캐비테이션 실험은 ASTM G32 규정에 의거하여 천연해수 내 $30^{\circ}C$에서 $50{\mu}m$의 진폭으로 실시하였다. 실험 후에는 주사전자현미경으로 손상표면을 관찰하였으며, 손상 정도를 비교하기 위해 무게 감소량을 계측하여 상호 비교/분석하였다.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2011

The objective of the present study is to identify the applicability of a low pressure fogging system for cooling commercial tomato greenhouse. In particular, the cooling system in this experiment utilizes low pressure spray nozzles which were developed in Korea recently. The experimental result that the temperature in fog-cooled greenhouse was lower than the non-cooled greenhouse showed the cooling effect by the low pressure fogging system. But because the relative humidity in fog-cooled greenhouse was comparatively low, the satisfactory cooling effect could be acquired by narrowing the space of fog nozzles and extending fogging time to supply more fog spray quantity. The variation of temperature distribution in fog-cooled greenhouse along timelag was insignificant during short time, but that was great during long period of day. This result showed the variation of temperature along timelag was slight by fog cooling but great by other factors like radiation, ventilation, air flow, etc. The advanced operation technology of fog system was required to reduce the variation of temperature along time lag. We plan to suggest the advanced installation and operation technology of low pressure fogging system for cooling commercial tomato greenhouse by further experiments in near future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.12
• /
• pp.1108-1114
• /
• 2007

The effect of oxidizer injection angle on the combustion characteristics of end-burning hybrid combustor is numerically investigated. Besides the previously studied parameter(injector arrangement, port diameter and O/F ratio), three different injection angle are considered: parallel angle to fuel surface(Case 1), +30 degree inclined angle toward the fuel(Case 2) and 30 degree inclined angle toward the nozzle(Case 3). It is found that Case 2 has the best mixing pattern in the upstream area but has the worst combustion efficiency since non negligible amount of unburned fuel is expelled from the nozzle. In contrast, though Case 1 and Case 3 showed relatively low mixing effect than the Case 2, they had high combustion efficiency. The comparison of numerical results between Case 1 and Case 3 demonstrate that no major difference is encountered, however, Case 1 is expected to have the best combustion efficiency due to the low residence time of the Case 3 injector which heads toward the nozzle.