• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.169-179
• /
• 2010

In these days, space design is evolving to the mixed reality space where fused on-line and off-line. But, standard and measure of mixed reality space has not been suggested and there has been little research about media environment and expression method as a mixed system either. That's why here I suggest four media environments and their characteristics that act not only as a critical point in the mixed reality space based on ubiquitous technology but also as a standard for spatial discerning. 1) Real space that is a media environment only seen by human visual and tactical sense is evolving using expression methods like new materials based on digital technology and LED. 2) Augmented reality space is a media environment using information instruments is expressed with diverse 2D and 3D contents. 3) Cyber Space is a environment depends totally on media instruments is produced by perfect graphic information without any spatial and physical limitations. 4) Augmented cyber space is realized only through the displays in cyber studio and is a space where real objects and graphic information are mixed. Depending on the purpose of the experience, media environment and expressional characteristics of mixed reality space can be fused, blended, and mixed, and that can be realized to the intelligent information space where one can experience without spatial, visual, informational limitations. In the future, studies on physical characteristics of contents according to the media environment characteristics are necessary.

• Korean Journal of Food Science and Technology
• /
• v.25 no.4
• /
• pp.373-378
• /
• 1993

A rapid gas chromatographic profiling method for the simultaneous analysis of free fatty and other acids was applied to vegetable oils. Oil samples were dissolved in dichloromethane and the free acids were extracted with saturated $NaHCO_3$ solution. The aqueous extract was acidified and then loaded onto the Chromosorb P column for the extraction. The acids were eluted with diethyl ether selectively from Chromosorb P column and were treated with triethylamine to prevent the losses of volatile acids. Several long chain fatty acids were detected from soybean oil, rice-bran oil, sesame oil and perilla oil. Various organic acids including odd number fatty acids were detected in crude oil, especially sesame oil. Arachidic acid from perilla oil and vanillic acid from sesame oil, which were not reported before were detected. The content ratio of free linoleic acid to oleic acid was $1.02{\sim}1.18$, which was similar to the reported data. When the GC profile of organic acids were simplified to their corresponding retention index spectra of bar graphical forms, they presented characteristic pattern of each vegetable oil that can be quickly recognized.

• Korean Journal of Food Science and Technology
• /
• v.25 no.6
• /
• pp.794-800
• /
• 1993

A lipid producing yeast was screened from leaves of Albabiscus and was identified as a Rhodotorula graminis SW 214. During the shakining incubation of 8 days at $25^{\circ}C$, the yeast produced extracellular lipids of 7.3g/l of the media. The relative concentration of carbon and nitrogen sources in the media influenced the extracellular lipid production greatly. When with nitrogen sources in the media were almost exhausted for growth of the yeast the sufficient carbon sources, the lipid production proceeded vigorously. Eight days of batch cultivation with 8% glucose, 2.5g/l of yeast extract, $KH_{2}PO_{4}(1g/l)\;MgSO_{4}\;(0.2g/l)$ and pH 6 gave maximum biomass and extracellular lipid production of 8.05g/l and 8.89g/l, respectively. The acid value, saponificatio value, the iodine value, ad the unsaponifiable matter of the extracellular lipids of Rhodotorula graminis SW 214 were 2.6, 534, 5.1 and 2.4, respectively. Lipid was constituted 75.2% triglyceride, 5.9% free fatty acid, 10.8% phospholipid, 4.9% esterified sterol and 3.3% free sterol. Major fatty acids found were 3-hydroxypentadecanoate, 3-hydroxyhexadecanate, trans-9-octadecanate, cis-9-hexadecanate (hydroxy palmitic), 15-methylhexadecanate (oleic), 18-methylno-nadecanate, octadecanate (stearic) and 3-hydroxytridecante.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.187-195
• /
• 2013

Most of former studies for car license plate detection restrict the image acquisition environment. The aim of this research is to diminish the restrictions by proposing a new method of using SIFT and neural network. SIFT can be used in diverse situations with less restriction because it provides size- and rotation-invariance and large discriminating power. SIFT extracted from the license plate image is divided into the internal(inside class) and the external(outside class) ones and the classifier is trained using them. In the proposed method, by just putting the various types of license plates, the trained neural network classifier can process all of the types. Although the classification performance is not high, the inside class appears densely over the plate region and sparsely over the non-plate regions. These characteristics create a local feature map, from which we can identify the location with the global maximum value as a candidate of license plate region. We collected image database with much less restriction than the conventional researches. The experiment and evaluation were done using this database. In terms of classification accuracy of SIFT keypoints, the correct recognition rate was 97.1%. The precision rate was 62.0% and recall rate was 50.2%. In terms of license plate detection rate, the correct recognition rate was 98.6%.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.365-370
• /
• 1983

Cellooligosaccharides were prepared from microcrystalline cellulose by acetolysis, deacetylation, and chromatographic fractionation, to determine the optimum time of treatment with acetolysis mixture. The fractionation was accomplished by ethanol-water gradient elution on chromatographic column composed of stearic acid-treated mixture of charcoal and Celite. The amount of initial acetolysis product was increased with the reaction period, however, the acetylated mixture of longer reaction period appeared to contain the greater bulk of methanol-insoluble material. Better yields of most of oligosaccharides were obtained with 3-hr acetolysis. When the reaction time was extended to 4-hr, yields of shorter chain oligosaccharides increased at the expense of the The yields obtained with 3-hr acetclys is from 68.2g of Sigmacell Type 19 were : cellotriose, 1.36g(2.0%) ; -tetraose, 1.64g(2.4%) ; -pentaose, 1.16g(1.7%) ; -hexaose, 0.82g(1.2%) ; and -heptaose, 0.21g(0.3%).

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.63-70
• /
• 2017

In this paper, a magnetic flux leakage(MFL) based steel bar damage detection was first researched to quantify the signals from damages on the wire rope. Though many researches inspecting damages using a MFL method was proceeded until the present, the researches are at the level that diagnose whether damages are or not. This has limitation to take measures in accordance with the damage level. Thus, a MFL inspection system was modeled using a finite element analysis(FEM) program dealing with electromagnetism problems, and a steel bar specimen was adopted as a ferromagnetic object. Then, an experimental study was also carried out to verify the simulation results with a steel bar which has same damage conditions as the simulation. The MFL signals was nearly not affected by the increase of the inspection velocity, and the magnitudes of the signals are not identical according to the change of the defect width even the defects have same depth. On the basis of the analysis, the signal properties from the damages were extracted to classify the type of damages, and it could be confirmed that classification of damages using extracted signal properties is feasible.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.3 s.41
• /
• pp.157-168
• /
• 2005

Trachytic rocks among the bimodal metavolcanic rocks of the Gyemyeongsan Formation and adjacent areas are investigated. Some rocks reveal very high content of iron and most rocks show very high abundances of rare earth elements and high field strength elements. Most rocks show significant Eu negative anomaly, which can be interpreted as the result of plagioclase fractionation. Lack of noticeable Nb negative anomaly indicates not-involvement of crustal material in their generation, which excludes the arc environment or remelting of continental crust from their genetic process. Metatrachytes of the Gymyeongsan Formation are plotted within the within-plate environment of the tectonic discrimination diagram utilizing immobile high field strength element Nb and Y. They also show typical characteristics of A-type magma, such as high Ga content. Considering their affinity to Al-type of Eby (1992) and their age of 750 Ma (Lee et al., 1998), they seem to have been produced by the differentiation of mantle-derived within-plate magmatism at the rift, related with the separation of Neoproterozoic supercontinent Rodinia. Possible connection of Gyemyeongsan and Munjuri Formations of the Okcheon metamorphic belt, at least part of them, to the Cathaysia block of South China during the Neoproterozoic is strongly suggested.

• The Journal of the Petrological Society of Korea
• /
• v.5 no.1
• /
• pp.108-120
• /
• 1996

This study reports petrography and geochemical characteristics of the Cretaceous volcanic rocks that are distributed in the vicinity of the Cheonsungsan area, Yangsan-Gun, Gyeongsangnam-Do. The Cretaceous volcanic rocks composed of andesitic rocks, Wonhyosan tuff, Cheonsungsan tuff in ascending order. Sedimentary rock is the basement in the study area cofered with volcanic rocks. These volcanic rocks are Wonhyosan tuff and Cheonsungsan tuff that represented the early phase of the Bulgugsa igneous activity. Wonhyosan tuff are classified into dacite tuff and dacite welded tuff based on the rock texture and their mineral composition. They are covered with Cheonsungsan tuff. Dacite tuff composed of lithic lapilli ash-flow tuff and vitric ash-flow tuff. Most dacite welded tuff are lapilli ash-flow tuff. Cheonsungsan tuff overlying the Wonhyosan tuff consists of rhyolite tuff and rhyolite welded tuff. Rhyolite tuff are lithic crystal ash-flow tuff and crystal vitric ash-flow tuff with somewhat accidental fragments of andesitic and sedimentary rocks. Rhyolite welded tuff is distinguishe from rhyolite tuff by is typical eelded fabrics and its rock color. According to petrochemical data, the volcanic rocks in study area belong to high-K orogenic suties. On the discriminant diagrams such as La/Yb versus Th/Yb, these rocks falls into the discriminant fields for the normal continental margin arc.

• Journal of Internet Computing and Services
• /
• v.14 no.6
• /
• pp.85-94
• /
• 2013

With the emergence of world wide web, in particular web 2.0 the rapidly growing amount of news articles has created a problem for users in selection of news articles according to their requirements. To overcome this problem different clustering mechanism has been proposed to broadly categorize news articles. However these techniques are totally machine oriented techniques and lack users' participation in the process of decision making for membership of clustering. In order to overcome the issue of zero-participation in the process of clustering news articles in this paper we have proposed a framework for clustering news articles by combining users' judgments that they post on twitter with the news articles to cluster the objects. We have employed twitter hash-tags for this purpose. Furthermore we have computed the credibility of users' based on frequency of retweets for their tweets in order to enhance the accuracy of the clustering membership function. In order to test performance of proposed methodology, we performed experiments on tweets messages tweeted during general election 2013 in Pakistan. Our results proved over claim that using users' output better outcome can be achieved then ordinary clustering algorithms.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.111-120
• /
• 2014

BACKGROUND: This study was conducted to investigate the levels of pesticide residues in fruits and to assess their risk to human health. METHODS AND RESULTS: Monitoring of 215 samples of fruits collected from local markets in incheon during 2013 was performed. 259 pesticides were analyzed by multi-residue method and Quick, Easy, Cheap, Effective, Rugged, and safe/Mass/Mass(QuEChERS/MS/MS) method using Gas Chromatography-Electron Capture Detector/Nitrogen Phosphorus Detector(GC-ECD/NPD), GC-MS, LC(Liquid Chromatography-Mass/Mass(LC-MS/MS) and High Performance Liquid Chromatography-Photodiode Array/Fluorescence Detector(HPLC-PDA/FLD). In 56.3% of the samples detected pesticide residues and were not found to exceed Maximum Residue Limits(MRL). The highest detected samples were found in citrus fruits(83.9%). Among the detected compounds, carbendazim(13.1%), imazalil (11.7%), thiabendazole(10.7%) and fludioxonil(9.8%) were frequently found in fruits. A risk assessment of pesticide residues in fruits was performed by calculating Estimated Daily Intake(EDI) and Acceptable Daily Intake(ADI). Also, we were evaluated removal efficiency of pesticide residues by washing and peeling. The removal efficiency of pesticide residues in citrus and tropical fruits by peeling processes were 91.6%. After the washing process, the removal rates were 43.1%(Cherry, Grape, Blueberry). CONCLUSION: The level of pesticide residues in fruits was within the MRL. The range of %ADI values was from 0.00011 to 0.98795%. The process of washing or peeling reduces the level of pesticide residues. The results of this research concluded that the detected pesticides are not harmful to human being.