• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.216-222
• /
• 2006

We propose the use of the Gaussian-curve fitting algorithm for the improvement of measurement accuracy in wavelengthscanned Fabry-Perot filter based demodulation systems. The peak locations of FBG sensors were calculated from the fitted curves rather than from distorted PD profiles, resulting in much better measurement accuracy than that of the highest-peak search algorithm. Also, the algorithm was proved to minimize measurement uncertainty of spectrally-distorted grating sensors. From our experimental results, a temperature resolution as small as ${\sim}0.3^{\circ}C$ was readily achieved by use of the Gaussian-curve fitting algorithm whereas the highest-peak search algorithm gave a temperature resolution larger than ${\sim}4^{\circ}C$.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.118-121
• /
• 2014

격자 양자 색역학(Lattice Quantum ChromoDynamics; Lattice QCD)은 자연계에 존재하는 중력, 전자 기력, 약한 핵력, 그리고 강한 핵력 등의 기본적인 상호작용 중 강한 핵력의 상호작용을 이해하기 위한 핵물리 분야의 이론이다. 이 물리 역학은 몬테 카를로(Monte Carlo) 기법을 이용하여 대규모 수치 연산을 필요로 하고, 수행시간 단축을 위하여 병렬처리가 필요하다. 본 논문에서는 격자 양자 색역학에서 요구되는 대규모 수치 연산에 대하여 마이크로프로세서와 성능가속기에 최적의 작업부하 분배를 통한 이기종 병렬처리 방법을 제안하고 성능가속기반을 사용한 방법과 제안 방법의 성능을 비교한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.87-87
• /
• 1999

본 연구에서는 Pulsed Laser Deposition(이하 PDL)방법을 이용하여 Si기판에 (Ba,Sr)TiO3(이하 BST)박막을 MFS-FET(Metal-Ferroelectric-Semiconductor Field-effect Transistor)구조로 제조하였으며 BST박막의 강유전성이 BST 박막에 유도되는 응력에 어떤 영향을 받는지 살펴보았다. 본 연구에서는 완충막을 사용함으로써 BST박막과 완충막간의 격자부정합을 이용하여 BST박막에 강유전성을 유도하려고 하였다. 또한 MFS-FET구조의 BST박막에 유도되는 응력조절을 위하여 BST박막과 완충막의 두께를 변화하였으며 XRD를 통한 구조 분석 및 C-V test를 통한 전기적 특성을 관찰을 하였다. PLD법을 통해서 epitaxial 성장된 BST 박막에서는 Si에 epitaxial 성장된 완충막과의 격자부정합에 의한 BST박막내의 자발분극의 발생이 예상된다. 따라서, 본 연구는 강유전체의 자발분극에 의하여 발생되는 C-V 이력현상이 BST박막과 완충막과의 격자부정합에 의한 응력에 의해 발생될 것으로 예상하여, BST 박막에 유도되는 응력과 C-V 이력현상의 관계를 통하여 상온에서 상유전성을 갖는 BST가 응력에 의하여 어느 정도의 강유전성을 나타내는지를 밝히기 위해 진행되었다. 본 연구에서 사용된 완충막은 YSZ(Yttria Stabilized Zirconia)박막으로 0.4mTorrO2 분위기 하에서 600~80$0^{\circ}C$의 온도에서 증착하여 상형성을 살펴보았고 $700^{\circ}C$에서 epitaxial 성장을 확인하였으며 두께는 30~$\AA$으로 변화하였다. 또한 BST박막은 완충막과의 전압분배를 고려해 300~2000$\AA$으로 두께를 변화를 시키며 증착하였다. MFS 구조에서 Al 전극을 사용하여 완충막과 BST박막간의 두께 변화에 따른 Capacitance - Voltage(C-V) 측정을 하였으며 이를 통하여 강유전상의 특성인 C-V 이력현상을 관찰하였다. 그 결과 YSZ 박막에서는 C-V 이력현상이 나타나지 않았으며 BST 박막에서는 약 1.2V의 C-V이력현상이 보였다.

• Journal of Korea Water Resources Association
• /
• v.49 no.7
• /
• pp.579-588
• /
• 2016

Changes in precipitation due to climate change is made to induce the local and intensive rainfall, it is increasing damage caused by inland inundation. Therefore, it requires a technique for predicting damage caused by flooding. In this study, in order to determine whether this flood inundated by any route when the levee was destroyed, Which can simulate the path of the flood inundation model was developed for the SIMOD (Simplified Inundation MODel). Multi Direction Method (MDM) for differential distributing the adjacent cells by using the slope and Flat-Water Assumption (FWA)-If more than one level higher in the cell adjacent to the cell level is the lowest altitude that increases the water level is equal to the adjacent cells- were applied For the evaluation of the model by setting the flooding scenarios were estimated hourly range from the target area. SIMOD model can significantly reduce simulation time because they use a simple input data of topography (DEM) and inflow flood. Since it is possible to predict results within minutes, if you can only identify inflow flood through the runoff model or levee collapse model. Therefore, it could be used to establish an evacuation plan due to flooding, such as EAP (Emergency Action Plan).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.9
• /
• pp.896-905
• /
• 2004

In this paper, the design, fabrication and experiment on a planar array antenna with a flat-topped radiation pattern for a mobile base station antenna were described. The current distribution of an antenna aperture, which is easily realizable in a feeding network compared with the conventional one of sin(x)/x was optimized for shaping a desired flat-topped radiation pattern. The planar array antenna designed in this paper has a rectangular lattice and is composed of array elements of 16${\times}$8. Each radiating element, which is a microstrip element fed coaxially, has a linear vertical polarization and the feed network which use a Wilkinson power divider and a 180$^{\circ}$ ring hybrid coupler as a base element is designed. The flat-topped radiation pattern with 90$^{\circ}$ is shaped by 16 array elements with the element spacing of 0.55 λ$_{ο}$ in the azimuth plane, and the normal radiation pattern with 10$^{\circ}$ is shaped by 8 array elements with the element spacing of 0.65 λ$_{ο}$ in the elevation plane. Also, the planar array antenna is symmetrically divided into four parts. It consists of one hundred-twenty-eight radiating elements, thirty-two 1-4 column dividers, low 1-8 row dividers and one 1-4 input power divider. In order to verify electrical performances of the planar way antenna proposed in this paper, the experimental breadboard operated in tile band of 1.92～2.17 GHz(IMT2000 band) was fabricated, and its experimental results were a good agreement with simulation ones.

• Journal of KIISE
• /
• v.43 no.3
• /
• pp.304-313
• /
• 2016

We present a novel memory-efficient parallel ray casting algorithm for unstructured grid volume rendering on multi-core CPUs. Our method is based on the Bunyk ray casting algorithm. To solve the high memory overhead problem of the Bunyk algorithm, we allocate a fixed size local buffer for each thread and the local buffers contain information of recently visited faces. The stored information is used by other rays or replaced by other face's information. To improve the utilization of local buffers, we propose an image-plane based ray grouping algorithm that makes ray groups have high coherency. The ray groups are then distributed to computing threads and each thread processes the given groups independently. We also propose a novel hash function that uses the index of faces as keys for calculating the buffer index each face will use to store the information. To see the benefits of our method, we applied it to three unstructured grid datasets with different sizes and measured the performance. We found that our method requires just 6% of the memory space compared with the Bunyk algorithm for storing face information. Also it shows compatible performance with the Bunyk algorithm even though it uses less memory. In addition, our method achieves up to 22% higher performance for a large-scale unstructured grid dataset with less memory than Bunyk algorithm. These results show the robustness and efficiency of our method and it demonstrates that our method is suitable to volume rendering for a large-scale unstructured grid dataset.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.259-269
• /
• 2012

With the lower supply voltage and the higher operating frequency in integrated circuits, the analysis of the power distribution network (PDN) including on-chip inductances becomes more important. In this paper, an effective inductance extraction method for a regular on-chip power grid structure is proposed. The loop inductance model applicable to chip layout is proposed and the inductance extraction tool using the proposed inductance model based on post layout RC circuits is developed. The accuracy of the proposed loop model and the developed tool is verified by comparing the test circuit simulation results with those from the partial element equivalent circuit (PEEC) model. The voltage fluctuation from the RLC circuits extracted by the developed tool was examined for the analysis of on-chip inductance effects. The significance of on-chip power grid inductance was investigated by the co-simulation of chip-package-PCB.

• Journal of the Korean Ceramic Society
• /
• v.25 no.2
• /
• pp.143-153
• /
• 1988

In order to synthesize the partially stabilized $\alpha$-Sialon, A1N and Y2O3 were added to synthesized $\alpha$-Si3N4. The phase composition, mechanical properties, micro structure, etc, of the synthesized $\alpha$-Sialon were investigated. Partially stabilized $\alpha$-Sialon ceramics could be synthesized from the composition which was a little deviated from x=0.4, x=0.6 composition along the Si3N4.0.1Y2O3:0.9AlN tie line at 1750-180$0^{\circ}C$ for 2 hrs in N2 atmosphere. It is assumed that A1N is more closely related than Y2O3 to the formation of $\alpha$-Sialon, and that A1N is more easily dissolved into $\alpha$-structure than into $\beta$-structure. In Ya2O3-rich phase mechanical properties were observed to be poor because of formation of mellilite, grain growth, and thermal decomposition of $\alpha$-Sialon. The maximum values of M.O.R, KIC and hardness are 723 MPa, 4.5MN/㎥/2 and 19.3 GPa, respectively, and they were observed for the $\alpha$-Sialon ceramics sintered at 178$0^{\circ}C$.

• Journal of Elementary Mathematics Education in Korea
• /
• v.14 no.2
• /
• pp.287-314
• /
• 2010

The algorithm is a chain of mechanical procedures, capable of solving a problem. In modern mathematics educations, the teaching algorithm is performing an important role, even though contracted than in the past. The conspicuous characteristic of current elementary mathematics textbook's manner of manipulating multiplication algorithm is exceeding converge to 'standard algorithm.' But there are many algorithm other than standard algorithm in calculating multiplication, and this diversity is important with respect to didactical dimension. In this thesis, we have reconstructed the experimental learning and teaching plan of multiplication algorithm unit by making the best use of diversity of multiplication algorithm. It's core contents are as follows. Firstly, It handled various modified algorithms in addition to standard algorithm. Secondly, It did not order children to use standard algorithm exclusively, but encouraged children to select algorithm according to his interest. As stated above, we have performed teaching experiment which is ruled by new lesson design and analysed the effects of teaching experiment. Through this study, we obtained the following results and suggestions. Firstly, the experimental learning and teaching plan was effective on understanding of the place-value principle and the distributive law. The experimental group which was learned through various modified algorithm in addition to standard algorithm displayed higher degree of understanding than the control group. Secondly, as for computational ability, the experimental group did not show better achievement than the control group. It's cause is, in my guess, that we taught the children the various modified algorithm and allowed the children to select a algorithm by preference. The experimental group was more interested in diversity of algorithm and it's application itself than correct computation. Thirdly, the lattice method was not adopted in the majority of present mathematics school textbooks, but ranked high in the children's preference. I suggest that the mathematics school textbooks which will be developed henceforth should accept the lattice method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1248-1256
• /
• 1993

The propagation and delay properties in opical fiber are particularly attractive because digital signal processing and conventional analog signal processing techniques such as those using surface acoustic wave devices are limited In their usefulness for signal bandwidth exceeding one or two GHz, although they are very effective at lower frequencies. Since an accurate, low loss and short time delay elements can be obtained by using such an optical fiber, optical signal precessing has attracted much attention for high speed and broad-band signal precessing in particular channel separation filtering for optical FDM signals. In this paper, we consider a coherent optical lattice filter, which uses coherent light sources and consists of directional couplers and optical fiber delay elemnts. The optical fiber fitters are more restricted than the usual digital filters. The reasons are as follows. 1) the coupling coefficients of directional couplers are restricted to the number between 0 and 1. 2) optical signal E(complex amplitude) is divided into J If-$\boxUl$ and J L/7$\div$$\boxUl$ at the directional coupler. Considering these restrictions and in this case all the coupling coefficients of summing and branching elements are set to be equal, we have given design formulae for optical lattice filter, which make the best use of optical signal energy.