• Journal of the Korean Geotechnical Society
• /
• v.29 no.7
• /
• pp.57-74
• /
• 2013

In this study, the virtual fixed point analysis and 3D full-modeling analysis for pile bent structures are conducted by considering various influencing factors and the applicability of the virtual fixed point theory is discussed. Also, a discrete analysis calculating separately both the superstructure and substructure of pile bent structures is performed on the basis of an equivalent base spring model by taking into account the major influencing parameters such as soil conditions, combined loading and pile diameter. The results show that the settlement and lateral deflection of the virtual fixed point theory are smaller than those of 3D full-modeling analysis. On the other hand, the virtual fixed point analysis overestimates the axial force and bending moment compared with 3D full-modeling analysis. It is shown that the virtual fixed point analysis cannot adequately predict the real behavior of pile bent structures. It is also found that discrete analysis gives similar results of lateral deflection and bending moment to those of unified analysis. Based on this study, it is found that discrete analysis considering column-pile interaction conditions is capable of predicting reasonably well the behavior of pile bent structures. It can be effectively used to perform a more economical design of pile bent structures.

• Journal of Aerospace System Engineering
• /
• v.17 no.2
• /
• pp.94-102
• /
• 2023

A nylon wire holding and release mechanism (HRM) has been widely used for deployable applications of CubeSat owing to its simplicity and low cost. In general, structural safety of solar panel with an HRM has been designed by performing structural analysis under a launch environment. However, previous studies have not performed thermal analysis for HRM in an on-orbit environment. In this study, Launch and Early Orbit Phase (LEOP) thermal analysis was performed to evaluate thermal stability of the mechanism in the orbital thermal environment of the pogo pin-based HRM applied to CubeSat. In addition, the effectiveness of the thermal design and performance of the pogo pin-based HRM were verified through a thermal vacuum test.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.1
• /
• pp.27-34
• /
• 2005

The present work has been developed the study of interpretation of separation behavior in gas expansion separation(GES) bolt which has the separation characteristics without fragmentation and minimum pyre-shock during the operation of the explosive bolt. In order to obtain the performance of minimum pyre-shock, the present work used non-compressive material instead of separation explosives. The use of the interpretation processor could be extensively helped to design the shape and the amount of explosives in the explosive bolt having complex geometry, and to analyse the separation behavior during the operation. It is also proved that the GES bolt is the most suitable the separation system necessary to minimum pyre-shock and non fragmentation compare with others.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2810-2812
• /
• 2001

본 논문에서는 독립성분해석을 이용한 영상분리에 있어서의 잡음에 대한 강인성에 대한 주성분해석과 비교 연구를 함으로써, 독립성분해석(Independent Component Analysis, ICA)기법의 효율성을 고찰하고 분석하고자 한다. 원래의 인식 시스템 모델에 잡음을 주었을 때, ICA를 이용한 영상 분리의 잡음에 대한 강인성은 주성분 해석(Principal Component Analysis, PCA)기법에서 보다 더 잡음에 강인한 성질을 내포하고 있는데, 이는 PCA 보다 ICA가 분리하려는 영상정보의 상호관계를 더 약화시키는 작용을 하기 때문이다. 이러한 특성은 모의실험을 통해 확인되었다.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.5
• /
• pp.33-43
• /
• 2011

In this study, simplified analysis (discrete analysis of column and pile) of pile bent structures was performed on the basis of the equivalent base spring model. And the minimum reinforcement ratio in pile bent structures was evaluated by taking into account various factors. To obtain the detailed information, simplified analysis was performed for column-pile interactions and the behavior of a column-pile was estimated and highlighted. Based on this study, it is shown that previous design method based on virtual fixed point theory cannot adequately predict the physical behavior of pile bent structures. It is found that the maximum bending moment is located within craking moment of the pile when material non-linearity is considered. It is also found that the minimum reinforcement ratio (=0.4%) is appropriately applicable for the optimal design of pile bent structure under ultimate lateral loading.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.4
• /
• pp.469-479
• /
• 2001

In the present study, free vibration analysis of multi-delaminated beams is performed. In order to investigate the effects of mu1ti-delaminations on the dynamic characteristics of multi-delaminated beams, the general kinematic continuity conditions are derived from the assumption of constant curvature at the multi-delamination tip. Frequency equations of multi-delaminated beams are obtained by dividing the global multi-delaminated beam into beam segments and by imposing recurrence relation from the continuity conditions un each sub-beam. The comparisons between the results of numerical analysis obtained by finite element analysis and those of present analysis give good agreement with each other. It is shown that the effects of multi-delaminations on free vibration characteristics of laminated beams could be used to detect their sizes, types and locations from the results.

• Journal of KIISE:Information Networking
• /
• v.30 no.1
• /
• pp.24-29
• /
• 2003

In this paper, a new method for the mixed image separation is presented using the independent component analysis, the innovation process, and the expectation-maximization. In general, the independent component analysis (ICA) is one of the widely used statistical signal processing schemes, which represents the information from observations as a set of random variables in the from of linear combinations of another statistically independent component variables. In various useful applications, ICA provides a more meaningful representation of the data than the principal component analysis through the transformation of the data to be quasi-orthogonal to each other. which can be utilized in linear projection.. However, it has been known that ICA does not establish good performance in source separation by itself. Thus, in order to overcome this limitation, there have been many techniques that are designed to reinforce the good properties of ICA, which improves the mixed image separation. Unfortunately, the innovation process still needs to be studied since it yields inconsistent innovation process that is attached to the ICA, the expectation and maximization process is added. The results presented in this paper show that the proposed improves the image separation as presented in experiments.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.24-29
• /
• 2004

In this paper, we summarize the results of free drop wind tunnel test, separation analysis and flight test in order to verify the safety during the separations of an external fuel tank and the LAU-131 rocket launcher from XKO-l. The wind tunnel test was conducted to show the safety in free drop of the stores and to gather the trajectory data for fine tune of MSAP(Multi-body Separation Analysis Program). The enhanced MSAP was then used to predict the trajectories of the stores with and without the ejector forces. A correlation of MSAP results for free drop case was also made to show the safety of jettison with the free drop type bomb rack. Moreover, the flight test was conducted. and its results were compared to analysis results. Finally, the safe jettison boundary was determined from the flight test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1252-1257
• /
• 2009

Off-line 6-DOF simulation program for store separation analysis has been developed. The developed program enables to predict a trajectory of a store from the database which was constructed by wind tunnel testing or CFD analysis. The flow angle method was applied to the program for predicting aerodynamic coefficients from the database and the ejector forces and constraints were enabled to incorporate the equations of motion for computing the trajectory. Using the program, the trajectories were calculated and the results are compared with the CTS results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1761-1764
• /
• 2008

본 연구에서는 상용 3차원 수치모형 코드인 FLOW-3D를 이용하여 난류모형에 따른 유류-유사 분리기 내에서 유체의 흐름거동을 해석하였다. 우수로 인해 발생한 유출수는 유류, 유사 및 쓰레기 등을 포함하고 있기 때문에 3차원적 거동을 하고 다양한 흐름특성을 갖는다. 유류-유사 분리기는 도심지의 지하구조물로서 이러한 유출수의 수질을 개선하여 하천이나 강으로 흘려보내는 기능을 갖는다. 분리기내에서의 복잡한 흐름 거동을 해석하기위해 정류판과 유류흡착기로 구성된 유류-유사분리기를 제작하여 수치모의를 실시하였다. 유류-유사분리기로 유입되는 유입수에 포함된 유사는 유체의 흐름이 분리기내에 설치되어있는 정류판을 지나면서 여과되도록 하였고 유사와 함께 유입수에 포함된 유류는 유류흡착기를 통해 여과되도록 하였다. 기존의 수리실험 결과와 수치모의를 통한 연구결과에서 유입수에 포함된 유사와 유류는 유류흡착기를 설치하였을 경우 유사와 유류의 분류활동이 더 활발하게 이루어지는 것을 알 수 있었다. 따라서, 본 연구에서는 유사와 유류의 포획률을 증가시키기 위한 단계로서 유류-유사분리기에 유류흡착기를 설치하고 분리기내의 복잡한 흐름을 각각의 난류모형을 이용하여 비교분석하였다. 수치모의는 $\kappa$ - 모형과 LES(Large Eddy Simulation) 모형의 두가지 난류모형을 사용하였고, FLOW-3D를 이용하여 3차원 수치모의를 실시하였다.