• Composites Research
• /
• v.31 no.5
• /
• pp.177-185
• /
• 2018

Fiber metal laminate (FML) is a type of hybrid composites which consist of metallic and fiber-reinforced plastic sheets. As the FML has a drawback of the delamination that is a failure of the interfacial adhesive layer, the nominal stresses and the energy release rates should be determined to identify the delamination behavior. However, it is difficult to derive the nominal stresses and the energy release rates since the operating temperature of the equipment is restricted. For this reason, the objective of this paper is to predict the mode-I nominal stress and the mode-I energy release rate of the adhesive layer using the inverse analysis based on the Levenberg-Marquardt method. First, the mode-I nominal stress was assumed as the tensile strength of the adhesive layer, and the mode-I energy release rate was obtained from the double cantilever beam test. Next, the finite element method was applied to predict the mode-I delamination behavior. Finally, the mode-I nominal stress and the mode-I energy release rate were predicted by the inverse analysis. In addition, the convergence of the parameters was validated by trying to input two cases of the initial parameters. Consequently, it is noted that the inverse analysis can predict the mode-I delamination behavior, and the two input parameters were converged to similar values.

• Journal of Life Science
• /
• v.25 no.2
• /
• pp.214-222
• /
• 2015

Aeromonas hydrophila is the most common water fish pathogen and cause diseases such as hemorrhagic septicemia, dropsy, ulceration and asymptomatic septicemia. A. hydrophila secretes many extracellular products (ECPs) which contribute to effective infection, wide distribution and great adaptability to environmental changes. Crude ECPs of A. hydrophila CK257, a strain used in this study, exhibits a toxic activity to the animals including mouse, rabbit and fish. Toxic symptoms were indicated by tissue damage and skin injuries in animal. When ECPs were subcutaneously injected to animals, skin damages were observed, appearing like necrosis. Preliminary research demonstrated that the active factors are protein component. The crude ECPs were collected after ammonium sulfate precipitation of cell-free culture supernatant. ECPs were fractionated with the use gel filtration chromatography. Five ECP fractions were obtained, of which one fraction was found to be toxic to goldfish. MALDI-TOF analyses provided two interesting proteases called M35 and M28. Both M35 and M28 are known as metalloprotease. Accordingly, proteins in an active fraction exhibited caseinolytic activity. These proteins were difference of caseinolytic activity under different metallic ions. Also active fraction has elastolytic activity. These results suggested that peptidase M28 and M35 may be a candidate factor for tissue necrosis activity about infection with A. hydrophila.

• Journal of Information Technology and Architecture
• /
• v.9 no.3
• /
• pp.233-241
• /
• 2012

Architecture framework (AF) is a guideline to define components needed to develop and operate enterprise architecture (EA), and to define relationships among the components. There are many architecture frameworks to operate EA of governments and businesses such as Zachman framework, DoDAF, TOGAF, FEAF, and TEAF. DoDAF is the most representative AF to support the development of the EA in the military domain. DoDAF is composed of eight viewpoints and 40 views that are affiliated with the viewpoints. To develop an AF for a specific goal, system architects decide a set of views. Furthermore, they determine data that are needed for a view modeling. However, views and data in DoDAF are structurally inter-related explicitly and/or implicitly. So, developing an AF for a specific goal is going to be a project to be carried out over a long haul. To reduce the burden of its development, in this paper, we develop ONT-SAF (Ontology for DoDAF) that can infer inter-relationships like referential and transitive relationships and the sequences among the views. Furthermore, to promote reusability and consistency of the views and the data within an AF, we adopt the view-data separation strategy. ONT-DAT contains classes like 'viewpoint', 'view', 'data', 'expression method', and 'reference model', and 11 properties including 'hasView.' To prove the effectiveness of ONT-SAF, we perform a case study.

• Korean Journal of Food Science and Technology
• /
• v.48 no.3
• /
• pp.275-283
• /
• 2016

An anti-amnesic effect of water extract from Dendropanax morbifera Lev. leaves (DMW) on memory dysfunction in streptozotocin-induced diabetic rats was investigated to assess its potential industrial value. Daily administration of DMW (11 weeks) significantly reduced serum glucose, insulin, and blood urea nitrogen (BUN) levels increased by an intraperitoneal injection of streptozotocin (STZ, 55 mg/kg). In addition, the administration of DMW decreased escape latency and increased the time spent in the platform quadrant in the Morris water maze test. Step-through latency in a passive avoidance test was also improved. Finally, DMW produced ameliorating effects on STZ-induced cholinergic deficit through an inhibitory effect on acetylcholinesterase and the increment of acetylcholine level in the hippocampus. These results suggest that DMW might be used as a natural substance for improving diabetic induced cognitive impairment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.59-68
• /
• 1999

Recently, research and developmental direction of communication system is concurrent adopting voice data and face image in speaking to provide more higher recognition rate then in the case of only voice data. Therefore, we present a method of lipreading in speech image sequence by using the 3-D facial shape model. The method use a feature information of the face image such as the opening-level of lip, the movement of jaw, and the projection height of lip. At first, we adjust the 3-D face model to speeching face image sequence. Then, to get a feature information we compute variance quantity from adjusted 3-D shape model of image sequence and use the variance quality of the adjusted 3-D model as recognition parameters. We use the intensity inclination values which obtaining from the variance in 3-D feature points as the separation of recognition units from the sequential image. After then, we use discrete HMM algorithm at recognition process, depending on multiple observation sequence which considers the variance of 3-D feature point fully. As a result of recognition experiment with the 8 Korean vowels and 2 Korean consonants, we have about 80% of recognition rate for the plosives and vowels. We propose that usability with visual distinguishing factor that using feature vector because as a result of recognition experiment for recognition parameter with the 10 korean vowels, obtaining high recognition rate.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.4
• /
• pp.201-212
• /
• 2002

This paper proposes a reconfigurable scheduler model that can support various real-time scheduling algorithms. The proposed model consists of two hierarchical upper and lower components, task scheduler and scheduling framework, respectively. The scheduling framework provides a job dispatcher and software timers. The task scheduler implements an appropriate scheduling algorithm, which supports a specific real-time application, based on the scheduling framework. If system developers observe internal kernel interfaces to communicate between two hierarchical components, they can implement a new scheduling algorithm independent of complex low kernel mechanism. Once a task scheduler is developed, it can be reused in a new real-time system in future. In Real-Time Linux (5), we implemented the proposed scheduling framework and several representative real-time scheduling algorithms. Throughout these implementations, we confirmed that a new scheduling algorithm could be developed independently without updates of complex low kernel modules. In order to confirm efficiency of the proposed model, we measured the performance of representative task schedulers. The results showed that the scheduling overhead of proposed model, which has two separated components, is similar to that of a classic monolithic kernel scheduler.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.5
• /
• pp.85-92
• /
• 2011

The dynamic behavior of piles becomes very complex due to soil-pile dynamic interaction, soil non-linearity, resonance phenomena of soil-pile system and so on. Therefore, the proper numerical simulation of the pile behavior needs much effort and calculation time. In this research, a new modeling method, which can be applied to the conventional finite difference analysis program FLAC 3D, was developed to reduce the calculation time. The soil domain in this method is divided into a near-field region and a far-field region, which is not influenced by the soil-pile dynamic interaction. Then, the ground motion of the far-field is applied to the boundaries of the near-field instead of modeling the far-field region as finite meshes. In addition, the soil non-linearity behavior is modeled by using the hysteretic damping model, which determines the soil tangent modulus as a function of shear strain and the interface element was applied to simulate the separation and slip between the soil and pile. The proposed method reduced the calculation time by as much as one third compared with a usual modeling method and maintained the accuracy of the calculated results. The calculated results by the proposed method showed a good agreement with the prototype pile behavior, which was obtained by applying a similitude law to the 1-g shaking table test results.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.6
• /
• pp.602-613
• /
• 2001

Recently, the computing has developing in distributed object computing environment for supporting a programming paradigm of distributed application requiring interoperability between heterogeneous clients and servers. It involves the complex networking and the object-oriented technologies for various multimedia application service. In this paper, we construct the real-time object group platform for solving the difficulties of managements of distributed objects and the real-time constraints by requiring for real-time service supporting of applications in distributed computing environment. The existing researches are being tried to only improving the performance of systems by using real-time CORBA itself, or modifying the part of CORBA compliance. Hence, we design a new model of real-time object group platform that can support the real-time requirement without modifying the ORB. The structure of our real-time object group analyzed and defined the requirement about object management and real-time application service sides. And the role of the components of real-time object group is divided into 2 classes for reducing the side effect of interoperability between management and service. Also, we considered how to transparently express the parameters of real-time properties for clients and developers of server's service objects. If the expression of real-time parameters is transparent, then the developer can easily extend the real-time parameters simply and flexibly. Therefore, in this paper we defined the role of components of platform and described functions of each component and designed and then implemented the real-time object group platform. Finally, we showed the execution procedures of implemented our platform for verifying the functionality.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10a
• /
• pp.297-300
• /
• 2001

최근의 컴퓨팅 환경은 이질적인 클라이언트와 서버들간의 상호 운용성을 요구하는 분산 어플리케이션을 위한 프로그래밍 파라다임을 지원하기 위한 분산 객체 컴퓨팅 환경으로 발전되고 있다. 여기에는 복잡한 네트워킹과 다양한 멀티미디어 응용 서비스를 위한 객체지향 기술들이 접목되고 있다. 이러한 분산 컴퓨팅 환경에서 처리되는 어플리케이션들의 실시간 서비스 지원을 위해 요구되는 실시간 특성과 분산 객체들의 관리의 어려움을 해결하기 위하여 본 논문에서는 실시간 객체그룹 플랫폼을 구축한다. 기존의 연구들은 실시간 CORBA를 사용하거나 또는 ORB를 수정하거나 실시간 운영체제상에 특정 CORBA 제품군을 사용하여 분산 환경의 특정 영역의 성능향상만을 도모하고 있다. 그러므로, 본 논문은 ORB의 수정 없이 표준 CORBA상에서 실시간 특성을 지원한 수 있는 실시간 객체그룹 플랫폼을 설계한다. 본 논문의 실시간 객체그룹 구조는 객체들의 관리적인 측면과 실시간 어플리케이션 서비스 지원 측면에 대한 요구사항들을 분석하여 정립한 모델이며, 구성요소들의 기능을 관리와 서비스로 분리하여 각각의 기능수행시에 발생하는 객체간의 상호작용이 다른 기능에 영향을 미치지 않도록 한다. 또한, 구축된 플랫폼은 실시간 어플리케이션 개발자에게 실시간 특성 파라미터의 표현과 처리에 대한 투명성을 부여하여 어플리케이션에 유연성과 확장성을 제공하기가 용이하도록 한다. 따라서, 본 논문은 실시간 객체그룹 플랫폼의 구성요소들에 대한 역할을 정의하고 기능을 정립하며, 각 구성요소들을 설계하고 구현하였으며, 구현되어진 실시간 객체그룹 플랫폼의 기능과 수행 성능을 검증한다.가지 유기화합물 중에서는 35.6%를 차지하였다. BTEX 각각 개별물질은 미국 환경보호청이 제시하는 일일 노출 기준량(Reference Concentration; RfC) 보다는 현저히 낮았다. 총 휘발성 유기화합물읜 농도는 실내가 실외 보다 높았다(I/O ratio 2.5). BTEX의 상대적 함량도 실내가 실외보다 높아 실내에도 발생원이 있음을 암시하고 있다. 자료 분석결과 유치원 실내의 벤젠은 실외로부터 유입되고 있었고, 톨루엔, 에틸벤젠, 크실렌은 실외뿐 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.2
• /
• pp.86-97
• /
• 2005

Accurate estimation of the wave-induced pore water pressure in the seabed is key factor in studying the stability of the seabed in the vicinity of coastal structure. Most of the existing numerical models for wave structure seabed interaction have been linked through applying hybrid numerical technique which is analysis method separating the wave field and seabed regime. Therefore, it is necessary to develope a numerical model f3r simulating accurately wave$\cdot$structure$\cdot$ seabed interaction under wave loadings by the single domain approach for wave field and seabed regime together. In this study, direct numerical simulation is newly proposed. In this model, modeled fluid drag has been used to detect the hydraulic properties according to the varied geometrical shape inside the porous media by considering the turbulence resistance as well as laminar resistance. Contrary to hybrid numerical technique, direct numerical simulation avoids the explicit formulation of the boundary conditions at the fluid/porous media interface. A good agreement has been obtained by the comparison between existed experimental results by hydraulic model test and direct numerical simulation results far wave $\cdot$structure$\cdot$seabed interaction. Therefore, the newly proposed numerical model is a powerful tool for estimating the nonlinear dynamic responses among a structure, its seabed foundation and water waves.