• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.645-653
• /
• 2011

The aim of this study was to develop a Pulsed Magnetic Fields(PMFs) system which can produce effects locally and simulate muscular tissues equally. To evaluate the PMFs system we caused DOMS(Delayed Onset Muscle Soreness) to subjects in biceps of the arm. Then, we stimulated acupoint HT2 using PMFs(20 minutes) and TEAS(20 minutes) for 2 days. The other subjects did not stimulate. Then we checked body surface temperature in biceps of the arm. All subjects had an asymmetrical body surface temperature in biceps after exercise(Non-stimulation group=$2.00{\pm}1.16^{\circ}C$, TEAS group=$1.73{\pm}0.52^{\circ}C$, PMFs group=$1.48{\pm}0.51^{\circ}C$). After 1st stimulation all subjects had decreased temperature differences(Non-stimulation group=$1.37{\pm}0.71^{\circ}C$, TEAS group=$1.08{\pm}0.43^{\circ}C$, PMFs group=$1.23{\pm}0.15^{\circ}C$). PMFs group had a symmetry body surface temperature after 24 hours($0.05{\pm}0.06^{\circ}C$) and TEAS group had that after 48 hours($0.1{\pm}0.08^{\circ}C$). Non-stimulation group did not recovery after 48 hours($0.37{\pm}0.06^{\circ}C$). Therefore, PMFs on acupoint had an therapeutic effect in DOMS.

• Korean Journal of Environment and Ecology
• /
• v.26 no.1
• /
• pp.46-56
• /
• 2012

Benthic macroinvertebrates were investigated in Hoeongseong Lake region from March to October 2010, Korea. Macroinvertebrate communities, composition of the functional feeding groups, habitiat oriented groups and the biological water quality were assessed above and below Hoeongseong Dam in the lake region. Six sites, two (St.1~2) above the lake, two (St. 3~4) into the lake, and two (St. 5~6) below the dam, were selected for quantitative (Surber sampler $30cm{\times}30cm$, mesh size 0.2 mm) and qualitative (Hand net) samplings of benthic macroinvertebrates. As a result, a total of 83 species belonging to 43 families, 17 orders, 8 classes, and 5 phyla were recognized. The EPT-group (50 spp. : 60.24%) that is major taxa or EPT-group plus Diptera (61 spp. : 73.49%) occupied most of benthic macroinvertebrates community. Based on quantitative sampling, the number of benthic maroinvertebrates above the lake was 2,399 individuals including 54 species, 28 families, 11 orders, 4 classes, and 4 phyla, whereas 510 individuals including 16 species, 12 families, 7 orders, 4 classes, and 3 phyla in the lake and 626 individuals including 62 species, 33 families, 13 orders, 6 classes, and 4 phyla below the dam were collected respectively. Dominance index was the highest, with 0.82-0.93 ($0.87{\pm}0.05$) in Hoeongseong lake (St. 3-4), diversity index was 3.04-3.16 ($3.10{\pm}0.06$), evenness index was 0.79-0.85 ($0.82{\pm}0.03$), and richness index was 7.27-8.52 ($7.90{\pm}0.63$), which were relatively higher below the dam sites. In the functional feeding groups, collector-gatherers and collector-filterers were the highest in the whole sites, and predators (Micronecta sedula) was appeared highly in the lake. Moreover, swimmers, burrowers, and clingers were considerably occupied in all collecting sites. The result of the DCA, similarity analysis, and MRPP were well reflective of the composition of lake and stream macroinvertebrates. ESB indicate that the lake sites were evaluated heavily polluted under priority improvement waters. Also, Semisulcospira gottschei, Ecdyonurus kibunensis, Epeorus pellucidus, Rhoenanthus coreanus, Stenelmis sp., and Cheumatopsyche brevilineata are considered as an indicator species above and below Hoeongseong Lake, whereas Macrobrachium nipponense and Micronecta sedula are indicated in the lake.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.277-287
• /
• 2010

Several species of the genus Aphidius are used in biological control programs against aphid pests throughout the world and their behavior and physiology are well studied. While the importance of sensory organs in their behavior is understood, their antennal structure remains largely unknown. In this study, the external morphology and distribution of the antennal sensilla on the antennal of both female and male adults of A. colemani were described using scanning electron microscopy (SEM). Generally, the filiform antennae of males ($l,515.2{\pm}116.5\;{\mu}m$) are longer than females ($l,275.1{\pm}103.4\;{\mu}m$). Antennae of this species are made up of radicle, scape, pedicel and flagellomeres. Male and female antennae differed in the total number of flagellomeres as 15 in males and 13 in females. The result of SEM observation was characterization and grouping of seven types of receptors into morphological classcs: Bohm bristles, Sensilla placodea, 2 types of S. coeloconica and S. trichodea, and S. basiconica as with a tip pore and with wall pores. In addition, the possible functions of the above sensilla types arc discussed in light of previously published literature; mechanoreception (Bohm bristles, S, coeloconica I & II and S. trichodea) and chemoreception (S. placodea, S. basiconica type I & II).

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.182-190
• /
• 2009

Statement of problem: Microleakage at the occlusal and gingival margin of Class V cavities restored with composite resin has traditionally been considered an obstacle to successful restoration. Purpose: The aim of this study was to assess the effectiveness of three different surface sealants(Fortify, Permaseal and Biscover LV) on the marginal sealing of Class V light-activated composite resin restorations(Z250). Material and methods: Forty noncarious human premolars and molars extracted within a three-month period were selected. Class V cavities with the occlusal margin in enamel and gingival margin in cementum were prepared in both buccal and lingual surfaces. The teeth, randomly assigned in four groups with twenty cavities in each group, were restored with composite resin after applying an adhesive system(Clearfil SE bond). After the finishing and polishing procedures, the restorations were covered with a specific surface sealants, except for the control samples, which were not sealed. After placing restorations, the specimens were thermocycled, and immersed in a 2% methylene blue solution for twenty four hours and sectioned longitudinally. The marginal microleakage was evaluated at the occlusal and gingival interfaces using a microscope and compared among the four groups using ANOVA test and Wilcoxon Rank-Sum test($\alpha$=0.05). Results: Statistical analysis showed that there was significantly less leakage when the surface sealants were used than there was in control group(P<.05). There were no significant differences of microleakage at occlusal and gingival margins among groups. There were no significant differences between microleakage of occlusal and gingival margins in each group. Fortify was not statistically different from control group at the gingival margin(P>.05). Conclusion: Application of surface sealants was an effective method of surface coating in reducing microleakage at occlusal and gingival margins of Class V composite resin restorations. However, it is certain that some microleakage still occurred despite the application of surface sealants, especially gingival margins.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.177-184
• /
• 2020

Purpose: The purpose of this study was to compare and evaluate the tensile bond strength of chairside reline resin to denture base resin fabricated by different methods (subtractive manufacturing, additive manufacturing, and conventional heat-curing). Materials and methods: Denture base specimens were fabricated as cuboid specimens with a width of 25 mm × length 25 mm × height 3 mm by subtractive manufacturing (VITA VIONIC BASE), additive manufacturing (NextDent Base) and conventional heat-curing (Lucitone 199). After storing the specimens in distilled water at 37℃ for 30 days and drying them, they were relined with polyethyl methacrylate (PEMA) chairside reline resin (REBASE II Normal). The subtractive and additive manufacturing groups were set as the experimental group, and the heat-curing group was set as the control group. Ten specimens were prepared for each group. After storing all bound specimens in distilled water at 37℃ for 24 hours, the tensile bond strength between denture bases and chairside reline resin was measured by a universal testing machine at a crosshead speed of 10 mm/min. The fracture pattern of each specimen was analyzed and classified into adhesive failure, cohesive failure, and mixed failure. Tensile bond strength, according to the fabrication method, was analyzed by 1-way ANOVA and Bonferroni's method (α=.05). Results: Mean tensile bond strength of the heat-curing group (2.45 ± 0.39 MPa) and subtractive manufacturing group (2.33 ± 0.39 MPa) had no significant difference (P>.999). The additive manufacturing group showed significantly lower tensile bond strength (1.23 ± 0.36 MPa) compared to the other groups (P<.001). Most specimens of heat-curing and subtractive manufacturing groups had mixed failure, but mixed failure and adhesive failure showed the same frequency in additive manufacturing group. Conclusion: The mean tensile bond strength of the subtractive manufacturing group was not significantly different from the heat-curing group. The additive manufacturing group showed significantly lower mean tensile bond strength than the other two groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.35-43
• /
• 2010

We have developed a sodium fluoride containing gelatin and methyl cellulose gel. Cariostatic abilities of those gel were investigated and compared with APF gel and fluoride varnish($Cavityshield^{TM}$). We prepared the bovine tooth samples and divided into two surface, control side and experimental side in same specimen for exclusion of difference between specimens. The experiment was consisted of 4 groups : (I) APF gel : (II) $Cavityshield^{TM}$ : (III) Gelatin F gel : (IV) Methyl cellulose F gel Decalcification were produced by placing each specimen into artificial acidic solution(pH 4.0) for 72 hours. Surface microhardness were measured and depth of demineralization lesion were measured by polarizing light microscope. The results were as follows: 1. The difference of VHN between control and experimental side is smallest in group I (p<0.05). 2. The largest difference was shown in group II (p<0.05). 3. There were no significant difference between group III and IV in microhardness test (p>0.05). 4. The difference of lesion depth is smallest in group I (p<0.05). 5. There were no significant difference between group II, III and IV in lesion depth (p>0.05). The result of the present study indicate that the fluoride containing gelatin and methyl cellulose gel is more effective than APF gel and is similar to fluoride varnish application for prevention of demineralization.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.2
• /
• pp.161-174
• /
• 2011

The purpose of this study was to evaluate the effect of ethanol addition on efficacy of two-step total-etch adhesive under over-wet condition by measurement of remaining volatile part (RVP), microtensile bond strength (${\mu}TBS$), and degree of conversion (DC). Two-step total-etch adhesive, Optibond Solo Plus (Kerr, Orange, USA), was used. Experimental groups were divided into 8 groups: Group 1 (only 10 ${\mu}l$ adhesive), Group 2 (mixture of 3 ${\mu}l$ distilled water and 10 ${\mu}l$ adhesive), From Group 3 to Group 8 (mixture of 3 ${\mu}l$ distilled water, 10 ${\mu}l$ adhesive, and ethanol added in 1 ${\mu}l$ increment from 1 ${\mu}l$ to 6 ${\mu}l$). The mixtures were placed on slide glass and evaporated for 10 s, 30 s, and 60 s by air-drying. The weight of RVP was measured by precision weight. Same procedures were performed for ${\mu}TBS$ test and measurement of DC. The condition of mixed solution was observed under light microscope. For RVP weight, the weights of experimental groups except for group 1 decreased with the increase of air-drying time (p<0.05). The DC increased with the increase of air-drying time in only group 5 and 6 (p<0.05). The ${\mu}TBS$ increased with the increase of air-drying time in group only 5, 6, and 7 (p<0.05). The phase separation was examined and water blisters were diminished with the increase of air-drying time in group 5, 6, 7, and 8. Within the limits of this study, ethanol additionally applied to adhesive decreased RVP and increased DC and ${\mu}TBS$ under over-wet condition. It was shown that the addition of ethanol to two-step total-etch adhesive under over-wet condition would remove water and increase the efficacy of adhesive.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.121-129
• /
• 2014

Marine algal flora and community structure were seasonally investigated at four sites in the vicinity of the Igidae on the southern east coast of Korea from May 2010 to February 2011. A total of 66 species including 9 of Chlorophyta, 14 of Phaeophyta, 43 of Rhodophyta were found during the survey period. Among these species, 16 species were found throughout the year. Seasonal mean biomass in wet weight was 123.6 (spring), 2,061.6 (summer), 412.0 (autumn), 678.9 (winter) $g{\cdot}m^{-2}$. Maximum biomass was recorded in summer($2,061.6g{\cdot}m^{-2}$), and minimum was recorded in spring($123.6g{\cdot}m^{-2}$). Spatial maximum and minimum species number were recorded at station 3 and 4(50 species) and at station 1(47 species). At station 1, 2 directly exposure on Yongho and Daeyeon cheon (stream) run off, and discharge from Nambu sewage treatment plants near coastal area, species diversity was relatively low and dominant species were similar throughout four seasons. The R/P, C/P and (R+C)/P value reflecting flora characteristics were 3.07, 0.64 and 3.71, respectively. The flora investigated could be classified into six functional groups such as coarsely branch form 39.39 %, sheet form 30.30 %, thick leather form 13.64 %, filamentous form 12.12 %, crustose form 3.03% and jointed calcareous form 1.52 % during survey period. The number of marine algae species in Igidea were 96 species at 1996 to 1997 and 66 species at 2010 to 2011, respectively. The change of seaweed species is due to the pollution loaded from sewage treatment plant and stream. We thus recommend that the positive maintenance control method like sewage treatment, for the protection of seaweed bed should be proceeded to near coastal area.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.9.1-10
• /
• 1981

The clinical study of 183 cases of laryngeal mass was observed and 88 cases of vocal nodule and polyp which is confirmed histopathologically, were clinically classified into 30 cases of vocal nodule, 48 cases of localized vocal polyp, 10 cases of diffuse vocal polyp, and the following results of microscopic examination were obtained. I. The clinical study of laryngeal mass 1. Among total cases of 183, vocal nodule is 82(45%) vocal polyp 53(29%) postintubation granuloma 3(1%) laryngeal papilloma 18(10%) tuberculosis 2(1%) cancer 25(14%). 2. The sex ratio of male to female is 3:4 in vocal nodule, 1:1 in vocal polyp, 1:2 in postintubation granuloma, 3:2 in laryngeal papilloma, 11:1 in cancer. 3. The age distribution is third-fourth decade in vocal nodule, fourth-fifth decade in vocal polyp, third decade in postintubation granuloma, second and fifth decade in laryngeal tuberculosis, sixth decade in laryngeal cancer. 4. The distribution of symptoms is 5 month. -1 year in vocal nodule and polyp, less than 1 year in laryngeal papilloma and postintubation granuloma, 1 year-3 year in laryngeal tuberculosis and cancer. 5. The location of the lesion is between the anterior 1/3 and middle 1/3 in vocal nodule and polyp and papilloma, middle 1/3 and posterior 1/3 in postintubation granuloma, and is diffusely spread on the entire vocal cord in laryngeal tuberculosis and cancer. 6. The side of the lesion is bilateral in vocal nodule and papilloma and the ratio of right to left is 5:3 in vocal polyp, 2:1 in postintubation granuloma. 7. The size is 1~2mm(67%) in vocal nodule, 3~5mm(42%) in vocal polyp, 6~10mm (67%) in postintubation granuloma, 1~2mm (39%) in papilloma, more than 10mm in tuberculosis and cancer. 8. Among the symptoms, the hoarseness is in more than 90% of disease entity, the sore-throat in tuberculosis and cancer, the dyspnea in postintubation granuloma and papilloma and tuberculosis and cancer. 9. In the past history, certain relationship with smoking is noted in cancer (40%) and tuberculosis(50%) and the history of frequent attack of URI is in papilloma(33%). 10. In occupation, certain statistical significance was not noted. II. The histopathological study of vocal nodule and polyp. 1. Most polyps and nodules were covered with stratified squamous epithelium, but focal hyperkeratosis, parakeratosis, acanthosis and atrophy were rather frequently observed. Hyperkeratosis and acanthosis was most frequently seen.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.904-910
• /
• 2016

Complex traits are determined by the combined effects of many loci and are affected by gene networks or biological pathways. Systems biology approaches have an important role in the identification of candidate genes related to complex diseases or traits at the system level. The gene network analysis has been performed by diverse types of methods such as gene co-expression, gene regulatory relationships, protein-protein interaction (PPI) and genetic networks. Moreover, the network-based methods were described for predicting gene functions such as graph theoretic method, neighborhood counting based methods and weighted function. However, there are a limited number of researches in livestock. The present study systemically analyzed genes associated with 102 types of economic traits based on the Animal Trait Ontology (ATO) and identified their relationships based on the gene co-expression network and PPI network in cattle. Then, we constructed the two types of gene network databases and network visualization system (http://www.nabc.go.kr/cg). We used a gene co-expression network analysis from the bovine expression value of bovine genes to generate gene co-expression network. PPI network was constructed from Human protein reference database based on the orthologous relationship between human and cattle. Finally, candidate genes and their network relationships were identified in each trait. They were typologically centered with large degree and betweenness centrality (BC) value in the gene network. The ontle program was applied to generate the database and to visualize the gene network results. This information would serve as valuable resources for exploiting genomic functions that influence economically and agriculturally important traits in cattle.