• Geophysics and Geophysical Exploration
• /
• v.12 no.1
• /
• pp.69-76
• /
• 2009

We report an implementation of the Ground Penetrating Radar (GPR) survey at a site that corresponds to a ruined castle. The objective of the survey was to characterise buried archaeological structures such as walls and tiles in Van Khan Tooril's Ruin, Mongolia, by 2D and 3D GPR techniques. GPR datasets were acquired in an area 10mby 9 m, with 10 cm line spacing. Two datasets were collected, using GPR with 500MHz and 800MHz frequency antennas. In this paper, we report the use of instantaneous parameters to detect archaeological targets such as tile, brick, and masonry by polarimetric GPR. Radar polarimetry is an advanced technology for extraction of target scattering characteristics. It gives us much more information about the size, shape, orientation, and surface condition of radar targets. We focused our interpretation on the strongest reflections. The image is enhanced by the use of instantaneous parameters. Judging by the shape and the width of the reflections, it is clear that moderate to high intensity response in instantaneous amplitude corresponds to brick and tiles. The instantaneous phase map gave information about the location of the targets, which appeared as discontinuities in the signal. In order to increase our ability to interpret these archaeological targets, we compared the GPR datasets acquired in two orthogonal survey directions. A good correlation is observed for the alignments of reflections when we compare the two datasets. However, more reflections appear in the north-south survey direction than in the west-east direction. This is due to the electric field orientation, which is in the horizontal plane for north-south survey directions and the horizontally polarised component of the backscattered high energy is recorded.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.331-331
• /
• 2012

InGaN/GaN 양자우물 LED소자의 내부양자효과 및 외부양자효과를 높이기 위해 많은 연구자들이 노력을 하고 있다. InGaN/GaN 양자우물 전광소자의 효율을 높이는 방법으로는 무분극 박막성장을 이용한 양자우물의 운반자 파동함수의 분리를 감소시키는 방법, 양자우물 위에 전자 차단층을 성장시키는 방법, 박막의 비발광 결함을 감소시키는 방법, 나노박막 또는 나노 입자를 이용한 표면 플라즈몬 효과를 이용하는 방법 등이 있다[1-3]. 본 연구에서는 은(Ag) 나노입자를 이용하여 InGaN/GaN 양자우물과 p-GaN 덮개층을 패턴에칭한 후, 그 위에 Ag 나노입자를 도포하여 표면 플라즈몬 효과를 이용한 InGaN/GaN 양자우물의 발광효율을 높이고자 하였다. c-면 방향의 사파이어에 유기화학금속증착법(MOCVD)으로 n-형 GaN를 2.0 ${\mu}m$ 성장한 후 그 위에 InGaN/GaN 양자우물 5층을 성장하였다. 또한 전자 차단층으로 AlGaN를 7 nm 증착한 후, p-type GaN를 100 nm 성장하였다. p-type GaN를 패턴하기 위해 포토리소그래피 와 유도결합 플라즈마 에칭공정을 거쳐 선 패턴을 형성하였는데, 이 때 에칭된 p-GaN 깊이는 약 90 nm 이었다. 에칭한 패턴크기가 LED소자의 전기적 및 광학적 특성에 미치는 영향을 알아보기 위해 전류-전압 측정과 photoluminescence 측정을 하였다. 그 후 급속열처리방법을 이용한 Ag 나노입자 형성과 표면플라즈몬이 소자의 발광효율에 미치는 영향에 대해 조사하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.170-178
• /
• 2020

Cymbal transducers are often used as an array rather than single because they have a high quality factor and low energy conversion efficiency. When used as an array, there occurs a big change in the frequency characteristics of the array due to the interaction between constituent transducers. In this study, we designed the structure of a cymbal transducer array to have ultra-wideband characteristics using this property. First, cymbal transducers with specific center frequencies were designed. Then, a 2×2 planar array was constructed with the designed transducers, where the cymbal transducers were arranged to have same or opposite polarization directions. For this structure, we analyzed the effect of the difference in the center frequency of and the spacing between the constituent transducers on the acoustical characteristics of the array. Based on the analysis, we designed the structure of the cymbal transducer array to have the widest possible bandwidth.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.4
• /
• pp.549-554
• /
• 2013

With the synthesis of graphene on Cu using CVD, it was tried to show the behavior of graphene growth depending on the size and orientation of Cu grain. It was found out that even under the same temperature and pressure the use of different gases influences on the diffusion rate of Cu. As compared to Ar gas, Cu grain growing bigger under $H_2$ and $CH_4$ was resulted in bigger graphene grain. Corrosion resistance was evaluated by potentiodynamic polarization test in room temperature and found out that the graphene on Cu was more stable in order of 10 than pure Cu due to the chemical stability of graphene. The future work of this research will focus on the synthesis of graphene having no defects including grain boundaries, and its engineering use.

• Korean Journal of Materials Research
• /
• v.10 no.5
• /
• pp.360-363
• /
• 2000

Deformation in the hysteresis loop of $Pb(Zr,Ti)O_3$ (PZT) thin films with various Zr/Ti ratios has been studied by varying the top electrode preparation method and the annealing temperature. Pt/PZT/Pt capacitors was found to be positively poled due to dc plasma potential generated during reactive ion etch (RIE) of Rt. Internal field is formed by space charges trapped at domain boundaries. Aging phenomenon such as constriction in the middle of the hysteresis loop was observed in the PZT film with top electrode deposited by sputtering. Top electrode annealing restores the hysteresis loop by removing the space charges. As Zr/Ti ratio decrease, voltage shift increases and an-nealing temperature at which internal field disappears also increases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.37-38
• /
• 2006

본 연구에서는 압전체의 횡 진동모드를 이용한 압전 초음파 진동자를 설계 분석하였다. 이전의 란쥬반 진동자는 진동을 얻기 위하여, 복수의 원판 또는 사각판 형태의 압전 세라믹을 서로 반대 방향으로 분극하여 마주 보도록 설치한 후 전기적으로 병렬로 연결하고 상단 및 하단에 금속부을 부착하여 전체를 볼트로 조인 복잡한 구조와 큰 출력 파워를 갚는 반면, 본 연구에서는 판상형의 압전소자와 일체형 금속진동체를 이용하여 기계적 출력 파워 조절이 용이한 구조의 압전 진동자를 고안하여, 압전진동자의 횡 진동 모드를 이용함으로써 신뢰성과 정확도가 높고 진동효율이 최대가 되도록 설계하였다. 설계 개발된 압전 진동자는 진동의 크기 조절이 용이하여 일반 진동자 뿐 만 아니라, 외과 및 안과 수술에 있어서 인체조직이나 각막상피의 활성화를 유지한 상태에서 안전하게 절개 및 분리 시술용 진동자로 사용 할 수 있는 이점이있다. 압전 진동자는 유한요소법 시뮬레이션 프로그램 (ATILA 5.2.4)을 이용하여 설계를 하였으며 압전소자의 두께는 각각 0.2 mm, 0.5 mm로 제작하여 시뮬레이션 결과와 제작된 샘플의 특성을 비교하였고, 변위측정은 칼날을 결합 한 상태에서 공진 주파수대역 부근 주파수별로 측정 비교하였다.

• Corrosion Science and Technology
• /
• v.14 no.1
• /
• pp.19-24
• /
• 2015

Flow Accelerated Corrosion (FAC) causes unexpected accidents in a secondary side of a nuclear power plant. The secondary side pipes are mainly carbon steel tubes that have a protective magnetite ($Fe_3O_4$) layer on the inner surface. The stability of the protective magnetite layer depends on the parameters related to the FAC phenomena such as pH, temperature, flow rate, surface roughness etc. The dissolution of magnetite is basically the electrochemical reaction, but the most of the experiments of magnetite dissolution were carried out thermodynamically to determine the solubility of magnetite. The knowledge of the electrochemical properties of magnetite is required to understand the dissolution process of magnetite. This paper reviews the manufacture of the magnetite ($Fe_3O_4$) electrode, and summaries the electrochemical properties of the magnetite.

• Journal of the Korean Magnetics Society
• /
• v.14 no.3
• /
• pp.94-98
• /
• 2004

The electronic structures and magnetism of MgCCo$_3$(001) surface terminated by the plane with the MgCo-Term (Mg, Co terminated) and the CCo-Term (C, Co terminated) were investigated using the all-electron full-potential linearized augmented Plane-wave method. For the MgCo-Term, the magnetic moment of Co atom of the surface is strongly enhanced to 1.00$\mu$$_{B}$, while the magnetic moment of Co atom of the subsurface is similar to that of the center layers. For the CCo-Term, the magnetic moments of Co atoms are enhanced to 0.75 and 0.80$\mu$$_{B}$ for the surface and subsurface layers, respectively. The magnetic moments of C and Mg atoms are coupled antiferromagnetically to that of the neighbour Co atoms. From the calculated density of states, we see that the enhancements of magnetic moments of Co atoms are closely related to localization of the Co-3d states.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.285-292
• /
• 2007

Magnetotelluric data recorded in the middle part of the Korean Peninsula are contaminated by severe noises at dead-band frequencies. In this study, we estimated the location of noise source using a source localization method. Since conventional beamforming techniques were not adequate for the localization of electromagnetic sources, we used the matched field processing and a genetic algorithm. The solutions for the strong noise signals tend to be localized in a narrow area, whereas those for natural MT signals shows randomly distributed patterns. The strong noise sources are mainly located in the western part of Kyonggi-do.

• Korean Journal of Materials Research
• /
• v.6 no.8
• /
• pp.825-832
• /
• 1996

적외선 센서의 재료로 활용되고 있는 PLT박막 (두께:8000$\AA$-9000$\AA$)을 Pt/Ti/SiO2/Si와 Pt/M\ulcorner의 하부 구조상에 50$0^{\circ}C$, 55$0^{\circ}C$ 및 $600^{\circ}C$에서 스퍼터링 증착하여 결정성 및 전기적 특성을 조사하였다. $600^{\circ}C$로 in-situ 성장된 PLT박막은 Si기판을 이용한 경우 randomly oriented perovskite 결정구조를 나타내었으며, Pt/MgO 구조위에서는 c-축(00ι)방향으로 배향 성장되었다. $600^{\circ}C$에서 in-situ 성장된 PLT박막의 비유전상수($\varepsilon$r)와 유전정접(tan $\delta$)을 10kHz-100kHz의 주파수에서 측정한 결과 Pt/Ti/SiO2/Si 구조상에 증착된 박막은$\varepsilon$r=90과 tan $\delta$=0.02의 값을 Pt/MgO 구조상에 증착된 박막은 $\varepsilon$e=35와 tan$\delta$=0.01의 값을 나타내었다. 잔류분극량(2Pr)과 초전계수(${\gamma}$)는 상온부근에서 Si 기판을 이용한 경우 각각 0.6$\mu$C/$\textrm{cm}^2$.。C과 0.5x10-8C/$\textrm{cm}^2$.。C정도로 매우 작게 나타났으나 PLT/Pt/MgO 구조에서는 2Pr=5$\mu$C/$\textrm{cm}^2$, r=4x10-8C/$\textrm{cm}^2$.。C로 비교적 양호한 초전박막의 전기적 특성을 나타내었다.