• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.311-312
• /
• 2001

암모니아는 무색의 기체이지만 자극성이 크면서 부식성이 있고 수용액이 알칼리성인 대표적인 악취물질이다. 보통의 경우는 굴뚝 등에서 배출가스의 형태로 대량 방출되기도 하지만 자연상태에서도 여러가지 생물학적 또는 화학적 반응 등을 통하여 생성되므로, 일상적인 생활 공간에서도 쉽게 검출될 수 있는 물질이다. 대기 중 암모니아의 농도는 기체상 시료를 직접 분석하는 가스 크로마토그래피와 시료를 액체상으로 변환시킨 후 암모늄 양이온의 농도를 분광광도법이나 중화적정법으로 측정한다. (중략)

• Journal of environmental and Sanitary engineering
• /
• v.17 no.4
• /
• pp.61-67
• /
• 2002

NIRS(Near infrared spectroscopy) scanning from 1300nm to 2400nm was appl ied for the DEHP(di-(2 ethylhexyl)phthalate) in PVC(polyvinyl chloride_packing material. All samples were devided into calibration group and validation group. As a result of conduction the multiple regression analysis on the correlation between the NIR spectrum data and chemical assay value obtained by the Korea Food Sanitation Act. The validation model for measuring the DEHP content had R of 0.997, SEC of 0.132, SEP of 0.176 by MLR and R of 0.996, SEC of 0.142, SEP of 0.198 by PLS and the detection limit was 0.1%. The obtained results indicate that the NIR procedure can potentially be used as a nondestructive analysis method for the purpose of rapid and simple measurement of DEHP in PVC packing material.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.1
• /
• pp.99-105
• /
• 1997

In the paper, aging of insulating oil in pole transformer has been studied by performing accelerated thermal aging test. Dissolved gases were extracted by air bubbling method. Concentration of dissolved gases were modified by extraction ratio of each gases in insulating oil. Aging of insulating materials were proceeded by thermal degradation and oxidation reaction. Both of the reactions followed zeroch order kinetics. Formation rate equations for hydrocarbons, carbon oxides, and hydrogen were derived. It was conformed by gas analysis and UV-Visible spectrophotometric method that iron core and copper coil in pole transformer act as catalyst during the aging process.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.1
• /
• pp.24-33
• /
• 1997

In this paper, aging of insulating oil in pole transformer has been studied by performing accelerated thermal aging test. Dissolved gases were extracted by air bubbling method. Concentration of dissolved gases were modified by extraction ratio of each gases in insulting oil. Aging of insulting materials were proceeded by thermal degradation and oxidation reaction. Both of the reactions followed zeroth order kinetics. Formation rate equations for hydrocarbons, carbon oxides, and hydrogen were derived. It was conformed by gas analysis and UV-visible spectrophotometric method that iron core and copper coil in pole transformer act as catalyst during the aging process.

• KSBB Journal
• /
• v.5 no.1
• /
• pp.37-42
• /
• 1990

In on-line measurement, there were two difficult problems to remove the biomass in the sample and to prevent the contamination at the sampling. In this study, the problem of the contamination at the sampling was solved by using the sampling device consisting of sterilizable sampling line, peristaltic pump and three-way valve. The glucose concentration was measured by glucose calibration equation without removing the biomass. Xanthan fermentation was performed satisfactorily using this automatic analyzing device.

• Journal of Cadastre & Land InformatiX
• /
• v.44 no.2
• /
• pp.103-112
• /
• 2014

The objective of this study is to suggest the possibility on land cover classification using hyperspectal imagery on area which includes lands and waters. After atmospheric correction as a preprocessing work was conducted on hyperspectral imagery acquired by airborne hyperspectral sensor CASI-1500, the effect of atmospheric correction to a few land cover class in before and after atmospheric correction was compared and analyzed. As the result of accuracy of land cover classification by highspectral imagery using reference data as airphoto and digital topographic map, maximum likelihood method represented overall accuracy as 67.0% and minimum distance method showed overall accuracy as 52.4%. Also product accuracy of land cover classification on road, dry field and green house, but that on river, forest, grassland showed low because the area of those was composed of complex object. Therefore, the study needs to select optimal band to classify specific object and to construct spectral library considering spectral characteristics of specific object.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.1
• /
• pp.76-87
• /
• 2014

Chlorophyll a in seawater which is an indicator of phytoplankton biomass and primary production is determined by High Performance Liquid Chromatography (HPLC), Fluorometry and Spectrophotometry. In this study, various methods for chlorophyll a determination in seawater are compared using in situ seawater samples from Korean seas. Three inter-laboratory comparison campaigns were carried out using chlorophyll a standard samples (R0) and in situ seawater samples, collected from the East China Sea (R1) and the East Sea (R2). 6 laboratories by HPLC methods, 4 laboratories by fluorometry, and 3 laboratories by spectrophotometry participated. Precisions, defined as the coefficient of variation (CV) were within 9% in standard samples, 0.8~20% (average: 6.1%) in R1, 4~21% (average: 13.2%) in R2. Discrepancy in three methods was approximately 20% within the range of the sample homogeneity intended the laboratory precision (R1: 8%, R2: 15%). The discrepancy in laboratories was greater than the discrepancy in methods. The chlorophyll a concentrations can be produced within 20% discrepancy in spite of using different methods. It is recommended to consider this 20% discrepancy when using the chlorophyll a data produced by different laboratories and different methods.

• Journal of the Korean Chemical Society
• /
• v.38 no.5
• /
• pp.351-358
• /
• 1994

The spectrophotometric determination of trace selenium(Ⅳ) using its catalytic reaction has been studied in aqueous solutions. The catalytic reaction of phenylhydrazine hydrochloride with selenium(Ⅳ) in an acidic aqueous medium produces benzenediazonium ion which will be converted into a red-coloured azo dye by coupling with H-acid(8-amino-1-naphtol-3,6-disulfonic acid disodium salt). For the reaction, the experimental conditions such as amounts of the reagents and pH of the sample solutions were optimized. After 15 ml of the sample solution was treated with 1 ml of 0.1 M EDTA solution to mask $Fe^{3+}$, etc., 1 ml of 0.06 M phenylhydrazine hydrochloride, 1 ml of 0.02 M H-acid, and 3 ml of 0.3 M-$KClO_3$ were added into the solution, sequentially. The solution was adjusted to pH 1.4 with HCl. After it was heated in a steam bath for 30 minutes, the solution was cooled down to a room temperature and then diluted to 25 ml with deionized distilled water. A blank solution for the absorbance measurement was prepared from the deionized water. The absorbance was measured at 527 nm. Using the above procedure, the trace amount of selenium was determined in natural waters such as tap, river and pond waters by a standard curve method and recoveries of Se spiked to samples were also obtained. From the recoveries of 104 to 111%, it could be concluded that this method was applicable to the quantitative determination of ng/ml level of selenium in natural waters.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.88-94
• /
• 2013

The hexavalent chromium (Cr(VI)) is well known as a hazardous ion, presumably inducing dermatic diseases and if serious cancer. The present study concerns the binding capacity of Cr(VI) ions in the cement powder and matrix for a quantitative technique of Cr(VI) ions in cement to influence human health. Both the water-soluble and acid-soluble Cr(VI) ions present in 3 types of ordinary Portland cement (OPC), pulverised fuel ash (PFA), ground granulated blast furnace slag (GGBS), and silica fume (SF) were measured using the spectrophotometer. As a result, it was found that the concentration of water-soluble Cr(VI) ion in cement ranged from 10.5 to 18.9mg/kg-cement, and in the additional materials a very low value of Cr(VI) ion was measured. Acid-soluble Cr(VI) ion was even higher than water-soluble Cr(VI) ion, ranging from 172.4 to 318.2mg/kg-cement. Nevertheless, the concentration of acid-soluble Cr(VI) ion is not proportional to addition of acid. It depends rather the variable pH of solvent involving cement paste. As enough cement hydration occurs, the binding capacity of Cr(VI) ion increases, inhibiting this ions from leaching out in the presence of hydration products such as ettringite or tri-calcium aluminate which bind Cr(VI) ion by ion-exchange.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.540-545
• /
• 1992

Kinetics and mechanism on the solvent extraction of nickel(Ⅱ) with 8-hydroxyquinoline (HOx) was studied spectrophotometrically. Absorbance variation was measured by changing the 8-hydroxyquinoline concentration in the chloroform organic phase and the pH values in the aquous phase. By analyzing absorbance data the reaction rate was found to be the first order for 8-hydroxyquinoline concentration and the inverse first one for [H$^+$]. Therefore the rate determining step of the extraction reaction is the formation of the one-to-one metal chelate NiOx$^+$ and the rate equation is as follows; -d[Ni$^{2+}$]/dt = k[Ni$^{2+}$][Ox$^-$] = k'[Ni$^{2+}$][HOx]$_0$/[H$^+$]. The value of k' was evaluated from the slope of plot of log [Ni$^{2+}$]$_0$/[Ni$^{2+}$]$_t$ versus time and the rate constant k was calculated according to the equation k' = k ${\times}$ K$_{HOx}$ / K$_{D,HOx}$. From the temperature dependence of the extraction rate, the activation energy E$_a$ = 6.26 kcal/mol is calculated, and activation parameters, ${\Delta}$G$^{\neq}_{298}$ = 6.59 kcal/mol, ${\Delta}$H$^{\neq}_{298}$ = 5.68 kcal/mol, ${\Delta}$S$^{\neq}_{298}$ = -3.09 eu/mol are estimated.