• Journal of Korean Library and Information Science Society
• /
• v.37 no.2
• /
• pp.273-290
• /
• 2006

Recently, a digital divide has gotten worse in the information age. So LG Sangnam library developed the ubiquitous library for the improvement of information accessability of the blind. It utilizes a mobile phone applied with NFC (Near Field Communication) technology and automates a user's identification process and serve library services at anytime from anywhere. Users can use three access points of a web service, a mobile service and a telephone library service. As a conclusion of this paper. Several recommendations were proposed. For the development of ubiquitous library, various instruments should be considered to diversify user's access points and a usability test and analysis about user's environmental context should be done simultaneously.

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.45-50
• /
• 1989

원유의 발견과 함께 북극의 개발이 활발해저왔고, 지역의 특수한 환경적인 요건으로 인해 시설물의 개발, 설치, 이동, 운용에 많은 어려움을 갖고 있다. 특히 빙산에 의한 극지 해안가의 해저면은 파이고, 손상되고, 변형된다. 북 알라스카의 해저면을 고르지 못하고, 불규칙하게 파이고, 손상된 형태를 보여주고, 특히 빙산의 활동이 활발한 지역과 시기에는 그 손상이 더욱 심하고, 자주 일어난다. 빙산에 의한 해저면의 홈은 빙산 해저 끝이 해저면에 접촉하여 해저 바닥을 파 나갈때 일어나는 현상이다. 빙산의 운동에너지는 해저면을 파 나가는 에너지로 변형되고, 그 힘이 평형하게 될 때까지 빙산의 운동은 계속된다. 빙산에 의한 해저면 손상은 극지 해안가의 해저시설물의 설계, 설치, 운용에 중대한 영향을 끼친다. 그러므로, 해저면 손상의 데이타 분석은 해안의 개발과 시설물의 설치에 큰 도움이 된다. 이 논문에서는 8년간에 걸친 약 십만개가 넘는 데이타를 토대로 알라스카 뷰오포트 해안가의 빙산에 의한 해저면 손상의 통계학적인 연구결과를 보여준다. 또한 각 변수의 최대치와 수심에 따른 변수의 최대 경계선을 추정하였고, 변수들의 상호관계를 연구하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.739-742
• /
• 2000

From the experimental study of W-EDM for alloyed steel, the characteristics such as Hand Drum Form and surface roughness have been observed and evaluated for various conditions. In square hole, the increase of If as to made condition the calculate high value of surface roughness. Also compare dimensionless square hole with circle hole' graph. In circle hole, if a value of surface roughness IP 6 in a side of circle it show a 0.4${\mu}{\textrm}{m}$ and in IP 8, 0.6${\mu}{\textrm}{m}$, in IP 10, 0.7${\mu}{\textrm}{m}$, in IP 12. 0.8${\mu}{\textrm}{m}$ higher than before. This figure show the surface roughness is higher than before, because a table move in either X-axis or Y-axis in square hole, on the contrary, in circle there table move in X-axis and Y-axis at the same time. hand drum form getting small when wire tension increase 1000gf to 1500gf, at the same working conditions. the smaller of off time, the mailer of hand drum form in same condition and same wire tension. but if you compare square hole with circle hole' graph hand drum form displayed in maintained term of working condision, on the contrary, in case of square hole variation of hand drum form is more increase than a grow of IP

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.820-823
• /
• 2000

The characteristics of wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of tungsten carbide in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension, the gap of deflection was decreased after thickness 60mm and discharge time of 6$\mu\textrm{s}$ due to the changing from fundamental mode to vibration mode. The deflection is the smallest at the water specific resistivity of 7.5 kΩ ㆍcm. The deflection is found to be decreased as increasing dwell time, and the result is due to the vibration of the pressure and the amount of the dielectric. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, was observed for rough wire-cutting EDM of STD-11. This phenomena is found to be decreased as the number of EDM is increased. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.537-542
• /
• 2000

Wire deflection, surface roughness and roundness were observed on changing discharge time for electrical discharge machining(EDM) of STD-11 in various conditions of thickness. The wire deflection was decreased as increasing discharge time and wire tension. The deflection is the smallest at the speed of wire of 10.6m/min and the water specific resistivity of 5k$\Omega$.cm. The deflection is found to be decreased as increasing dwell time. But if the water pressure is high, it is found not to be changed after the vibration of 4sec. The component of copper(Cu) and zinc(Zn), which is the main material of wire electrode, is observed for rough wire-cutting EDM of STD-11. This phenomena is found to be similar in spite of the change of EDM energy level. But it will be improved by changing the material and the shape of wire. The roundness of middle is found to be worse than that of upper and it is increased as the thickness of material is increased.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.567-572
• /
• 2000

From the experimental study of W-EDM for alloyed steel, the characteristics such as Hand Drum Form and surface roughness have been observed and evaluated for various conditions. In square hole, the increase of IP as to made condition, the calculate high value of surface roughness. Also compare dimensionless square hole with circle hole' graph, In circle hole, if a value of surface roughness IP 6 in a side of circle it show a 0.4${\mu}{\textrm}{m}$ and in IP 8, 0.6${\mu}{\textrm}{m}$, in IP 10, 0.7${\mu}{\textrm}{m}$, in IP 12, 0.8${\mu}{\textrm}{m}$ higher than before. This figure show the surface roughness is higher than before, because a table move in either X-axis or Y-axis in square hole, on the contrary, in circle there table move in X-axis and Y-axis at the same time. hand drum form getting small when wire tension increase 1000gf to 1500gf, at the same working conditions. The smaller of off time, the maller of hand drum form in same condition and same wire tension. but if you compare square hole with circle hole' graph, hand drum form displayed in maintained term of working condision, on the contrary, in case of square hole variation of hand drum form is more increase than a grow of IP

• Knowledge Management Research
• /
• v.17 no.1
• /
• pp.17-47
• /
• 2016

People use social network services (SNSs) for various purposes, for example, to share information, to express themselves, and to strengthen social relationships with others. Meanwhile, problems of personal information leakage and privacy infringement become a social issue and thus information privacy concerns about inappropriate collection and use of personal information increase in SNSs (e.g., Facebook). Although people have privacy concerns in SNSs, they behave in a contradictory way, voluntarily presenting themselves and disclosing personal information. This phenomenon is called 'privacy paradox'. Using dual factor theory, this study investigates the phenomenon of privacy paradox by looking into enablers (e.g., self-presentation) and inhibitors (e.g., information privacy concern) for continuous use of Facebook that can co-exist independently of each other. It also includes antecedents of self-presentation (i.e., narcissism, need for affiliation, involvement, and self-efficacy) and those of information privacy concern (i.e., previous experience of privacy infringement, privacy awareness, and privacy control). The results show that most hypothesized relationships were supported. These findings provide strategic implications for SNS providers who want to promote continuous use of SNS. Under the current circumstances in which enhanced privacy policies are required, this study would be a useful reference for future research on information privacy issues in SNSs.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.673-680
• /
• 2007

The seismic source parameters of the Odaesan earthquake on 20 January 2007, including focal depth, focal mechanism, magnitude, and source characteristics, are analysed using seismic moment tensor inversion. The Green's function for different 3 crust models representing the southern Korean Peninsula are used. Final results show that the event, considering 6 seismic moment tensor elements, is caused by the typical strike slip fault with nearly NNE strike. The focal depth is estimated to be about 11km and 6 seismic moment tensor elements with 7.2% CLVD value shows typical double couple seismic source. The consistent characteristics of the strike and epicenter of the event with Odaesan fault imply that Odaesan earthquake is mainly caused by movement of the Odaesan fault.

• Proceedings of the Fisheries Business Administration Society of Korea Conference
• /
• 2005.11a
• /
• pp.29-50
• /
• 2005

EU는 세계 3위의 어업생산지역임에도 불구하고 가공어류와 양식수산물에 대한 세계 최대의 소비시장을 가진 탓에 만성적인 수산물 공급부족을 겪고 있다. 이에 따라 EU는 일찍부터 제3국과의 어업협정을 통한 원양어장 진출을 적극적으로 추진해 왔다. EU의 원양어장 진출정책을 시기별로 분류하면 1세대 유형에서부터 4세대 유형으로 구분가능하다. 수역별로는 크게 유럽북부와 남부수역으로 분리되어 있으나, 어업협정 유형으로는 북유럽형, 발틱형, 북미형, 중남미형, 그리고 ACP형으로 세분화 할 수 있다. EU는 특히 대부분의 쌍무어업협정을 아프리카, 인도양, 서태평양 연안국들과 맺고 있어, 이들 국가와의 쌍무적 어업관계가 EU 원양어업정책에 있어 매우 중요하다. 최근 원양어장의 자원부족현상이 점차 심각해짐에 따라 EU 위원회는 그들의 공동어업정책 개혁안에 제3국과의 어업협력강화 방안을 수립하였다. 이는 연안국과의 어업관계를 단순입어에서 동반자적 입어관계로 발전시키는 한편, 어업 외적인 부문의 협력을 포함하는 포괄적 접근 정책을 추진하고 있다. 이러한 EU의 움직임은 단순한 어획쿼터할당에 대한 입어료지급 방식은 조업국과 연안국 간의 신뢰관계 증진에 그다지 도움이 되지 못한다는 것을 의미한다. 따라서 조업국은 연안국에 대한 자원관리기술을 지원해 주고, 자원평가에도 공동으로 참여함으로써 양국간 협력적 수산자원관리정책을 지향하도록 하여야 한다는 것을 시사하고 있다.

• Journal of the Speleological Society of Korea
• /
• no.79
• /
• pp.7-16
• /
• 2007

블루투스란 근거리에 놓여 있는 컴퓨터와 이동단말기 가전제품 등을 무선으로 연결하여 쌍방향으로 실시간 통신을 가능하게 해주는 규격을 말하거나 그 규격에 맞는 제품을 이르는 말이다. 가정 및 사무실에서 사용되는 모든 정보기기에 장착되는 것을 목표로 무선망을 구성하여 어떠한 유/무선망과도 연동할 수 있게 한다. 따라서, 블루투스를 이용한 무선 네트워크가 완성되면 모든 정보기기간의 자유로운 데이터 교환이 이루어지며, 인터넷 브리지를 구성하면 현재 광케이블이나 ADSL, 모뎀 등을 통해 데스크탑 컴퓨터에 도달해 있는 인터넷 정보가 비로소 사용자의 손안에까지 도달할 수 있게 된다. 즉, 무선통신의 궁극적인 목표인 언제, 어디서나, 누구나, 어떤 형태의 정보도 교환한다는 목표에 대한 완성으로까지 볼 수 있다. 미국 시장조사 회사 가트너의 "블루투스 시장의 3단계 발전 전망"이라는 보고서에 따르면, 첫 단계에서는 어댑터 카드나 USB 단자 부착 PC, 고기능 휴대폰 등에 채택되고, 두 번째 단계에는 저가의 Mobile 제품, 무선전화, 개인휴대단말기, 가정용 네트워킹기기, 자동차 등으로 블루투스 탑재기기가 크게 증가할 것이고, 세 번째 단계에는 거의 모든 휴대기기에 채택되어 시장규모가 확대될 것으로 전망하고 있다. 블루투스는 현재 휴대폰, 노트북 컴퓨터, 디지털카메라, 휴대 게임기 등 휴대기기 제조업체는 물론 자동차 제조업체 등 전자, 정보홍신 이외 기업의 지지도 받고 있다.